Develop Reference

Regex to accept special character only in presence of alphabets or numeric value in JavaScript?

I have a Javascript regex like this:
/^[a-zA-Z0-9 !##$%^&*()-_-~.+,/\" ]+$/
which allows following conditions:
only alphabets allowed
only numeric allowed
combination of alphabets and numeric allowed
combination of alphabets, numeric and special characters are allowed
I want to modify above regex to cover two more cases as below:
only special characters are not allowed
string should not start with special characters
so basicaly my requirement is:
string = 'abc' -> Correct
string = '123' -> Correct
string = 'abc123' ->Correct
string = 'abc123!##' ->Correct
string = 'abc!##123' -> Correct
string = '123!##abc' -> Correct
string = '!##' -> Wrong
string = '!##abc' -> Wrong
string = '!##123' -> Wrong
string = '!##abc123' -> Wrong
can someone please help me with this?

You can require at least one alphanumeric:
/^(?=[^a-zA-Z0-9]*[a-zA-Z0-9])[a-zA-Z0-9 !##$%^&*()_~.+,/\" -]+$/
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Also, I think you wanted to match a literal -, so need to repeat it, just escape, change -_- to \-_, or - better - move to the end of the character class.
The (?=[^a-zA-Z0-9]*[a-zA-Z0-9]) pattern is a positive character class that requires an ASCII letter of digit after any zero or more chars other than ASCII letters or digits, immediately to the right of the current location, here, from the start of string.

Just add [a-zA-Z0-9] to the beginning of the regex:
/^[a-zA-Z0-9][a-zA-Z0-9 \^\\\-!##$%&*()_~.+,/'"]+$/gm
Note, if within a class (ie [...]) that there are four special characters that must be escaped by prefixing a backward slash (\) to it so that it is interpreted as it's literal meaning:
// If within a class (ie [...])
^ \ - ]
// If not within a class
\ ^ $ . * + ? ( ) [ ] { } |
RegEx101

If all the special characters are allowed and you consider that underscore _ is also a special character then you can always simplify your RegEx like this :
/^[^\W_].+$/
Check here for your given examples on Regex101

Remove part of word from a string with Javascript

I would like to find words in a sentence starting with a prefix and remove the rest of the characters.
Example:
this sentence Type_123 contains a Type_uiy
I would like to remove the characters that come after Type so I can have:
this sentence Type contains a Type
I know how I would go to remove the prefix with regex str.replace(/Type_/g,'') but how do I do the opposite action?
N.B. js prior ES6 if possible

Use the expression \b(Type)\w+ to capture the Type prefix.
Explanation:
\b | Match a word boundary (beginning of word)
(Type) | Capture the word "Type"
\w+ | Match one or more word characters, including an underscore
var str = 'this sentence Type_123 contains a Type_uiy';
var regex = /\b(Type)\w+/g;
console.log(str.replace(regex, '$1'));
The $1 in the replace() method is a reference to the captured characters. In this case, $1 stands for Type. So anywhere in the sentence, Type_xxx will be replaced with Type.
See MDN's documentation on the replace() method.

Install: https://github.com/icodeforlove/string-saw
let str = "Here's a sentence that contains Type_123 and Type_uiy";
let result = saw(str)
.remove(/(?<=Type_)\w+/g)
.toString();
The above would result in:
"Here's a sentence that contains Type_ and Type_"

how to replace all occurrances of "\\" string in java script

This seems a very simple question but I haven't been able to get this to work.
How do I convert the following string:
var origin_str = "abc/!/!"; // Original string
var modified_str = "abc!!"; // replaced string
I tried this:
console.log(origin_str.replace(/\\/,''));
This only removes the first occurrence of backslash. I want to replaceAll. I followed this instruction in SO: How to replace all occurrences of a string in JavaScript?
origin_str.replace(new RegExp('\\', 'g'), '');
This code throws me an error SyntaxError: Invalid regular expression: /\/: \ at end of pattern. What's the regex for removing backslash in javascript.

A quick basic overview of regular expressions in JavaScript
When using regular expressions you can define the expression on two ways.
Either directly in the function or variable by using /regular expression/
Or by using the regExp contructor: new RegExp('regular expression').
Please note the difference between the two ways of defining. In the first the search pattern is encapsuled by forward slashes, while in the second one the search pattern is passed as a string.
Remember that regular expressions is in fact a search language with it's own syntax. Some characters are used to define actions: /, \, ^, $, . (dot), |, ?, *, +, (, ), [, {, ', ". These characters are called metacharacters and need to be escaped if you want them to be part of the search pattern. If not they will be treated as an option or generate script errors. Escaping is done by using the backslash. E.g. \\ escapes the second backslash and the search pattern will now search for backslashes.
There are a multitude of options you can add to your search pattern.:
Examples
adding \d will make the pattern search for a numeric value between [0-9] and/or the underscore. Simple regular expressions are parsed from left to right.
/javascript/
Searches for the word javascript in a string.
/[a-z]/
When a pattern is put between square bracket the search pattern searches for a character matching any one of the values inside the square brackets. This will find d in 229302d34330
You can build a regular expression with multiple blocks.
/(java)|(emca)script/
Find javascript or emcascript in a string. The | is the or operator.
/a/ vs. /a+/
The first matches the first a in aaabbb, the second matches a repetition of a until another character is found. So the second matches: aaa.
The plus sign + means find a one or more times. You can also use * which means zero or more times.
/^\d+$/
We've seen the \d earlier and also the plus sign. This means find one or more numeric characters. The ^ (caret) and $ (dollar sign) are new. The ^ says start searching from the begin of the string, while the $ says until the end of the string. This expression will match: 574545485 but not d43849343, 549854fff or 4348d8788.
Flags
Flags are operators and are declared after the regular expression /regular expression/flags
JavaScript has three flags you can use:
g (global) Searches multiples times for the pattern.
i (ignore case) Ignores case in pattern.
m (multiline) treat beginning and end characters (^ and $) as working over multiple lines (i.e., match the beginning or end of each line (delimited by \n or \r), not only the very beginning or end of the whole input string)
So a regular expression like this:
/d[0-9]+/ig
matches D094938 and D344783 in 98498D094938A37834D344783.
The i makes the search case-insensitive. Matching a D because of the d in the pattern. If D is followed by one or more numbers then the pattern is matched. The g flag commands the expression to look for the pattern globally or simply said: multiple times.
In your case #Qwerty provided the correct regex:
origin_str.replace(/\//g, "")
Where the search pattern is a single forward slash /. Escaped by the backslash to prevent script errors. The g flags commands the replace function to search for all occurrences of the forward slash in the string and replace them with an empty string "".
For a comprehensive tutorial and reference : http://www.regular-expressions.info/tutorial.html

Looking for this?
origin_str.replace(/\//g, "")
The syntax for replace is
.replace(/pattern/flags, replacement)
So in my case the pattern is \/ - an escaped slash
and g is global flag.

Javascript multiple regex pattern

I'm trying to exclude some internal IP addresses and some internal IP address formats from viewing certain logos and links in the site.I have multiple range of IP addresses(sample given below). Is it possible to write a regex that could match all the IP addresses in the list below using javascript?
10.X.X.X
12.122.X.X
12.211.X.X
64.X.X.X
64.23.X.X
74.23.211.92
and 10 more

Quote the periods, replace the X's with \d+, and join them all together with pipes:
const allowedIPpatterns = [
"10.X.X.X",
"12.122.X.X",
"12.211.X.X",
"64.X.X.X",
"64.23.X.X",
"74.23.211.92" //, etc.
];
const allowedRegexStr = '^(?:' +
allowedIPpatterns.
join('|').
replace(/\./g, '\\.').
replace(/X/g, '\\d+') +
')$';
const allowedRegexp = new RegExp(allowedRegexStr);
Then you're all set:
'10.1.2.3'.match(allowedRegexp) // => ['10.1.2.3']
'100.1.2.3'.match(allowedRegexp) // => null
How it works:
First, we have to turn the individual IP patterns into regular expressions matching their intent. One regular expression for "all IPs of the form '12.122.X.X'" is this:
^12\.122\.\d+\.\d+$
^ means the match has to start at the beginning of the string; otherwise, 112.122.X.X IPs would also match.
12 etc: digits match themselves
\.: a period in a regex matches any character at all; we want literal periods, so we put a backslash in front.
\d: shorthand for [0-9]; matches any digit.
+: means "1 or more" - 1 or more digits, in this case.
$: similarly to ^, this means the match has to end at the end of the string.
So, we turn the IP patterns into regexes like that. For an individual pattern you could use code like this:
const regexStr = `^` + ipXpattern.
replace(/\./g, '\\.').
replace(/X/g, '\\d+') +
`$`;
Which just replaces all .s with \. and Xs with \d+ and sticks the ^ and $ on the ends.
(Note the doubled backslashes; both string parsing and regex parsing use backslashes, so wherever we want a literal one to make it past the string parser to the regular expression parser, we have to double it.)
In a regular expression, the alternation this|that matches anything that matches either this or that. So we can check for a match against all the IP's at once if we to turn the list into a single regex of the form re1|re2|re3|...|relast.
Then we can do some refactoring to make the regex matcher's job easier; in this case, since all the regexes are going to have ^...$, we can move those constraints out of the individual regexes and put them on the whole thing: ^(10\.\d+\.\d+\.\d+|12\.122\.\d+\.\d+|...)$. The parentheses keep the ^ from being only part of the first pattern and $ from being only part of the last. But since plain parentheses capture as well as group, and we don't need to capture anything, I replaced them with the non-grouping version (?:..).
And in this case we can do the global search-and-replace once on the giant string instead of individually on each pattern. So the result is the code above:
const allowedRegexStr = '^(?:' +
allowedIPpatterns.
join('|').
replace(/\./g, '\\.').
replace(/X/g, '\\d+') +
')$';
That's still just a string; we have to turn it into an actual RegExp object to do the matching:
const allowedRegexp = new RegExp(allowedRegexStr);
As written, this doesn't filter out illegal IPs - for instance, 10.1234.5678.9012 would match the first pattern. If you want to limit the individual byte values to the decimal range 0-255, you can use a more complicated regex than \d+, like this:
(?:\d{1,2}|1\d{2}|2[0-4]\d|25[0-5])
That matches "any one or two digits, or '1' followed by any two digits, or '2' followed by any of '0' through '4' followed by any digit, or '25' followed by any of '0' through '5'". Replacing the \d with that turns the full string-munging expression into this:
const allowedRegexStr = '^(?:' +
allowedIPpatterns.
join('|').
replace(/\./g, '\\.').
replace(/X/g, '(?:\\d{1,2}|1\\d{2}|2[0-4]\\d|25[0-5])') +
')$';
And makes the actual regex look much more unwieldy:
^(?:10\.(?:\d{1,2}|1\d{2}|2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d{2}|2[0-4]\d|25[0-5]).(?:\d{1,2}|1\d{2}|2[0-4]\d|25[0-5])|12\.122\....
but you don't have to look at it, just match against it. :)

You could do it in regex, but it's not going to be pretty, especially since JavaScript doesn't even support verbose regexes, which means that it has to be one humongous line of regex without any comments. Furthermore, regexes are ill-suited for matching ranges of numbers. I suspect that there are better tools for dealing with this.
Well, OK, here goes (for the samples you provided):
var myregexp = /\b(?:74\.23\.211\.92|(?:12\.(?:122|211)|64\.23)\.(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])|(?:10|64)\.(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9]))\b/g;
As a verbose ("readable") regex:
\b # start of number
(?: # Either match...
74\.23\.211\.92 # an explicit address
| # or
(?: # an address that starts with
12\.(?:122|211) # 12.122 or 12.211
| # or
64\.23 # 64.23
)
\. # .
(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\. # followed by 0..255 and a dot
(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9]) # followed by 0..255
| # or
(?:10|64) # match 10 or 64
\. # .
(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\. # followed by 0..255 and a dot
(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\. # followed by 0..255 and a dot
(?:25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9]) # followed by 0..255
)
\b # end of number

/^(X|\d{1,3})(\.(X|\d{1,3})){3}$/ should do it.

If you don't actually need to match the "X" character you could use this:
\b(?:\d{1,3}\.){3}\d{1,3}\b
Otherwise I would use the solution cebarrett provided.

I'm not entirely sure of what you're trying to achieve here (doesn't look anyone else is either).
However, if it's validation, then here's a solution to validate an IP address that doesn't use RegEx. First, split the input string at the dot. Then using parseInt on the number, make sure it isn't higher than 255.
function ipValidator(ipAddress) {
var ipSegments = ipAddress.split('.');
for(var i=0;i<ipSegments.length;i++)
{
if(parseInt(ipSegments[i]) > 255){
return 'fail';
}
}
return 'match';
}
Running the following returns 'match':
document.write(ipValidator('10.255.255.125'));
Whereas this will return 'fail':
document.write(ipValidator('10.255.256.125'));
Here's a noted version in a jsfiddle with some examples, http://jsfiddle.net/VGp2p/2/

Javascript RegExp Tokenizing

Given a string, I want to use a regular expression to tokenize it. The pattern is as follows: any character (including new line, etc.), until "<", followed by a space zero or more times, followed by "%".
I tried
var patt = /(.)*<(\s)*%/;
but it does not yield the desired result. I would appreciate an explanation along with the pattern.

Use this:
"some string".split(/.*<\s*%/);

/^[\s\S]*?< *%/
should do what you want.
^ causes it to match at the beginning of the string.
[\s\S] matches any character. Literally, it means any space or non-space character, and works around the fact that . does not match newlines.
*? matches zero or more but the fewest necessary for the rest of the pattern to match.
< matches a literal '<'
* (note the space) matches zero or more spaces. This is more readable if written as [ ]*.
% finally matches that character.
If you want to match the entire string (i.e. the % should be the last character in the string), then you can put a $ before the last /.