This is what works as expected:
This parseFloat(newValue).toLocaleString("de-DE", { minimumFractionDigits: 2, maximumFractionDigits: 2 }) will result in a String: "34.886,55"
This does not work as expected:
For parseFloat("34.886,55") I get a Number, but I lost everything after the comma: 34.886.
How can I fix this problem ?
I wrote this simple function for doing locale based parseFloat, to the best of my knowledge, the assumptions for this function are.
The decimal operator will come once.
So split it at the decimal("," in our case) to get two elements in an array.
Then remove the thousands separator("." in our case) for each of the elements in the array.
Then joinback the array with the decimal separator ("." in our case)
finally return the parseFloat value of this joined number!
var str = "34.886,55"
console.log("before: ", str);
str = localeParseFloat(str, ",", ".");
console.log("resulting floating value from the function: ", str);
function localeParseFloat(str, decimalChar, separatorChar){
var out = [];
str.split(",").map(function(x){
x = x.replace(".", "");
out.push(x);
})
out = out.join(".");
return parseFloat(out);
}
<script src="https://rawgit.com/eu81273/jsfiddle-console/master/console.js"></script>
Here's a brief example of the number parsing... Commas are not valid in numbers, only the full stop represents the decimal separator. If it is encountered, the string conversion stop, as you can see on the second log. Also check the third log, I've added a check for the value to be true if it's lower than 100, making it more obvious that you are not playing with thousand separator but really decimal separator.
console.log(parseFloat("34.886.55"));
console.log(parseFloat("34,886.55"));
console.log(parseFloat("34.886,55"), parseFloat("34.886,55") < 100);
When i am writing 11.00 it is displaying 11.00.00 otherwise its working fine on rest
if(pos == -1)
{
document.getElementById("printCheckAmount").textContent = "$" + checkObj.checkAmount + ".00";
}
else
{
var integer = enterCheckAmount.substring(0,pos);
var decimals = enterCheckAmount.substring(pos+1);
while(decimals.length<2) decimals=decimals+'0';
enterCheckAmount = integer + '.' + decimals;
document.getElementById("printCheckAmount").textContent = "$" + checkObj.checkAmount;
}
JavaScript doesn't have a variable type for decimal numbers. It has only Number. If you want to display an integer as a decimal number with two zeros after the decimal point you can use the method toFixed.
Here is an example:
var myNumber = 11;
var myDecimalNumber = myNumber.toFixed(2);
console.log(myDecimalNumber) // will output 11.00
Thus there is no need to concatenate strings and add ".00" manually to your number.
Beyond this you can use the methods parseInt and parseFloat. Let's say you have a variable of type string with the value "11 pieces". You can get the integer with this line of code:
var myString = "11 pieces";
var myInteger = parseInt(myString, 10);
console.log(myInteger); // will output 11
If you have something similar like this, you are better off with this methods instead of cuting substrings.
I wish you a lot of success in refactoring your code and a warm welcome to the StackOverflow community.
Itroduction
I'm currently working on John Conway's Game of Life in js. I have the game working (view here) and i'm working on extra functionalities such as sharing your "grid / game" to your friends. To do this i'm extracting the value's of the grid (if the cell is alive or dead) into a long string of 0's and 1's.
This string has a variable length since the grid is not always the same size. for example:
grid 1 has a length and width of 30 => so the string's length is 900
grid 2 has a length and width of 50 => so the string's length is 2500
The problem
As you can see these string's of 0's and 1's are way too long to copy around and share.
However hard i try I don't seem to be able to come up with a code that would compress a string this long to a easy to handle one.
Any ideas on how to compress (and decompress) this?
I have considered simply writing down every possible grid option for the gird sizes 1x1 to 100x100 and giving them a key/reference to use as sharable code. Doing that by hand would be madness but maybe any of you has an idea on how to create an algorithm that can do this?
GitHub repository
In case it wasn't already obvious, the string you're trying to store looks like a binary string.
Counting systems
Binary is a number in base-2. This essentially means that there are two characters being used to keep count. Normally we are used to count with base-10 (decimal characters). In computer science the hexadecimal system (base-16) is also widely being used.
Since you're not storing the bits as bits but as bytes (use var a = 0b1100001; if you ever wish to store them like bits) the 'binary' you wish to store just takes as much space as any other random string with the same length.
Since you're using the binary system each position just has 2 possible values. When using the hexadecimal value a single position can hold up to 16 possible values. This is already a big improvement when it comes to storing the data compactly. As an example 0b11111111 and 0xff both represents the decimal number 255.
In your situation that'd shave 6 bytes of every 8 bytes you have to store. In the end you'd be stuck with a string just 1/4th of the length of the original string.
Javascript implementation
Essentially what we want to do is to interpret the string you store as binary and retrieve the hexadecimal value. Luckily JavaScript has built in functionality to achieve stuff like this:
var bin =
'1110101110100011' +
'0000101111100001' +
'1010010101011010' +
'0000110111011111' +
'1111111001010101' +
'0111000011100001' +
'1011010100110001' +
'0111111110010100' +
'0111110110100101' +
'0000111101100111' +
'1100001111011100' +
'0101011100001111' +
'0110011011001101' +
'1000110010001001' +
'1010100010000011' +
'0011110000000000';
var returnValue = '';
for (var i = 0; i < parseInt(bin.length / 8); i++) {
returnValue += parseInt(bin.substr(i*8, 8), 2).toString(16);
}
console.log(bin.length); // Will return 265
console.log(returnValue.length); // Will return 64
We're saying "parse this string and interpret it like a base-2 number and store it as a hexadecimal string".
Decoding is practically the same. Replace all occurrences of the number 8 in the example above with 2 and vice versa.
Please note
A prerequisite for this code to work correctly is that the binary length is dividable by 8. See the following example:
parseInt('00011110', 2).toString(16); // returns '1e'
parseInt('1e', 16).toString(2); // returns '11110'
// Technically both representations still have the same decimal value
When decoding you should add leading zeros until you have a full byte (8 bits).
In case the positions you have to store are not dividable by 8 you can, for example, add padding and add a number to the front of the output string to identify how much positions to strip.
Wait, there's more
To get even shorter strings you can build a lookup table with 265 characters in which you search for the character associated with the specific position. (This works because you're still storing the hexadecimal value as a string.) Sadly neither the ASCII nor the UTF-8 encodings are suited for this as there are blocks with values which have no characters defined.
It may look like:
// Go fill this array until you have 265 values within it.
var lookup = ['A', 'B', 'C', 'D'];
var smallerValue = lookup[0x00];
This way you can have 265 possible values at a single position, AND you have used your byte to the fullest.
Please note that no real compression is happening here. We're rather utilising data types to be used more efficiently for your current use case.
If we make the assumption than the grid contains much more 0's than 1's, you may want to try this simple compression scheme:
convert the binary string to an hexadecimal string
convert '00' sub-strings to 'z' symbol
convert 'zz' sub-strings to 'Z' symbol
we could go further, but let's stop here for the demo
Below is an example with a 16x16 grid:
var bin =
'0000000000000000' +
'0000001000000000' +
'0000011100000000' +
'0000001000000000' +
'0000000000000000' +
'0000000000111000' +
'0000100000111000' +
'0000000000111000' +
'0000000000000000' +
'0000000000000000' +
'0000000010000000' +
'0000000101000000' +
'0000000010000000' +
'0000000000000000' +
'0000100000000000' +
'0000000000000000';
var packed = bin
.match(/(.{4})/g)
.map(function(x) {
return parseInt(x, 2).toString(16);
})
.join('')
.replace(/00/g, 'z')
.replace(/zz/g, 'Z');
This will produce the string "Z02z07z02ZZ380838z38ZZz8z14z08Zz8Zz".
The unpacking process is doing the exact opposite:
var bin = packed
.replace(/Z/g, 'zz')
.replace(/z/g, '00')
.split('')
.map(function(x) {
return ('000' + parseInt(x, 16).toString(2)).substr(-4, 4);
})
.join('');
Note that this code will only work correctly if the length of the input string is a multiple of 4. If it's not the case, you'll have to pad the input and crop the output.
EDIT : 2nd method
If the input is completely random -- with roughly as many 0's as 1's and no specific repeating patterns -- the best you can do is probably to convert the binary string to a BASE64 string. It will be significantly shorter (this time with a fixed compression ratio of about 17%) and can still be copied/pasted by the user.
Packing:
var bin =
'1110101110100011' +
'0000101111100001' +
'1010010101011010' +
'0000110111011111' +
'1111111001010101' +
'0111000011100001' +
'1011010100110001' +
'0111111110010100' +
'0111110110100101' +
'0000111101100111' +
'1100001111011100' +
'0101011100001111' +
'0110011011001101' +
'1000110010001001' +
'1010100010000011' +
'0011110000000000';
var packed =
btoa(
bin
.match(/(.{8})/g)
.map(function(x) {
return String.fromCharCode(parseInt(x, 2));
})
.join('')
);
Will produce the string "66ML4aVaDd/+VXDhtTF/lH2lD2fD3FcPZs2MiaiDPAA=".
Unpacking:
var bin =
atob(packed)
.split('')
.map(function(x) {
return ('0000000' + x.charCodeAt(0).toString(2)).substr(-8, 8);
})
.join('');
Or if you want to go a step further, you can consider using something like base91 instead, for a reduced encoding overhead.
LZ-string
Using LZ-string I was able to compress the "code" quite a bit.
By simply compressing it to base64 like this:
var compressed = LZString.compressToBase64(string)
Decompressing is also just as simple as this:
var decompressed = LZString.decompressFromBase64(compressed)
However the length of this compressed string is still pretty long given that you have about as many 0s as 1s (not given in the example)
example
But the compression does work.
ANSWER
For any of you who are wondering how exactly I ended up doing it, here's how:
First I made sure every string passed in would be padded with leading 0s untill it was devidable by 8. (saving the amount of 0s used to pad, since they're needed while decompressing)
I used Corstian's answer and functions to compress my string (interpreted as binary) into a hexadecimal string. Although i had to make one slight alteration.
Not every binary substring with a lenght of 8 will return exactly 2 hex characters. so for those cases i ended up just adding a 0 in front of the substring. The hex substring will have the same value but it's length will now be 2.
Next up i used a functionality from Arnaulds answer. Taking every double character and replacing it with a single character (one not used in the hexadecimal alphabet to avoid conflict). I did this twice for every hexadecimal character.
For example:
the hex string 11 will become h and hh will become H
01101111 will become 0h0H
Since most grids are gonna have more dead cells then alive ones, I made sure the 0s would be able to compress even further, using Arnaulds method again but going a step further.
00 -> g | gg -> G | GG -> w | ww -> W | WW -> x | xx -> X | XX-> y | yy -> Y | YY -> z | zz -> Z
This resulted in Z representing 4096 (binary) 0s
The last step of the compression was adding the amount of leading 0s in front of the compressed string, so we can shave those off at the end of decompressing.
This is how the returned string looks in the end.
amount of leading 0s-compressed string so a 64*64 empty grid, will result in 0-Z
Decompressing is practically doing everything the other way around.
Firstly splitting the number that represents how many leading 0s we've used as padding from the compressed string.
Then using Arnaulds functionality, turning the further "compressed" characters back into hexadecimal code.
Taking this hex string and turning it back into binary code. Making sure, as Corstian pointed out, that every binary substring will have a length of 8. (ifnot we pad the substrings with leading 0s untill the do, exactly, have a length of 8)
And then the last step is to shave off the leading 0s we've used as padding to make the begin string devidable by 8.
The functions
Function I use to compress:
/**
* Compresses the a binary string into a compressed string.
* Returns the compressed string.
*/
Codes.compress = function(bin) {
bin = bin.toString(); // To make sure the binary is a string;
var returnValue = ''; // Empty string to add our data to later on.
// If the lenght of the binary string is not devidable by 8 the compression
// won't work correctly. So we add leading 0s to the string and store the amount
// of leading 0s in a variable.
// Determining the amount of 'padding' needed.
var padding = ((Math.ceil(bin.length/8))*8)-bin.length;
// Adding the leading 0s to the binary string.
for (var i = 0; i < padding; i++) {
bin = '0'+bin;
}
for (var i = 0; i < parseInt(bin.length / 8); i++) {
// Determining the substring.
var substring = bin.substr(i*8, 8)
// Determining the hexValue of this binary substring.
var hexValue = parseInt(substring, 2).toString(16);
// Not all binary values produce two hex numbers. For example:
// '00000011' gives just a '3' while what we wand would be '03'. So we add a 0 in front.
if(hexValue.length == 1) hexValue = '0'+hexValue;
// Adding this hexValue to the end string which we will return.
returnValue += hexValue;
}
// Compressing the hex string even further.
// If there's any double hex chars in the string it will take those and compress those into 1 char.
// Then if we have multiple of those chars these are compressed into 1 char again.
// For example: the hex string "ff will result in a "v" and "ffff" will result in a "V".
// Also: "11" will result in a "h" and "1111" will result in a "H"
// For the 0s this process is repeated a few times.
// (string with 4096 0s) (this would represent a 64*64 EMPTY grid)
// will result in a "Z".
var returnValue = returnValue.replace(/00/g, 'g')
.replace(/gg/g, 'G')
// Since 0s are probably more likely to exist in our binary and hex, we go a step further compressing them like this:
.replace(/GG/g, 'w')
.replace(/ww/g, 'W')
.replace(/WW/g, 'x')
.replace(/xx/g, 'X')
.replace(/XX/g, 'y')
.replace(/yy/g, 'Y')
.replace(/YY/g, 'z')
.replace(/zz/g, 'Z')
//Rest of the chars...
.replace(/11/g, 'h')
.replace(/hh/g, 'H')
.replace(/22/g, 'i')
.replace(/ii/g, 'I')
.replace(/33/g, 'j')
.replace(/jj/g, 'J')
.replace(/44/g, 'k')
.replace(/kk/g, 'K')
.replace(/55/g, 'l')
.replace(/ll/g, 'L')
.replace(/66/g, 'm')
.replace(/mm/g, 'M')
.replace(/77/g, 'n')
.replace(/nn/g, 'N')
.replace(/88/g, 'o')
.replace(/oo/g, 'O')
.replace(/99/g, 'p')
.replace(/pp/g, 'P')
.replace(/aa/g, 'q')
.replace(/qq/g, 'Q')
.replace(/bb/g, 'r')
.replace(/rr/g, 'R')
.replace(/cc/g, 's')
.replace(/ss/g, 'S')
.replace(/dd/g, 't')
.replace(/tt/g, 'T')
.replace(/ee/g, 'u')
.replace(/uu/g, 'U')
.replace(/ff/g, 'v')
.replace(/vv/g, 'V');
// Adding the number of leading 0s that need to be ignored when decompressing to the string.
returnValue = padding+'-'+returnValue;
// Returning the compressed string.
return returnValue;
}
The function I use to decompress:
/**
* Decompresses the compressed string back into a binary string.
* Returns the decompressed string.
*/
Codes.decompress = function(compressed) {
var returnValue = ''; // Empty string to add our data to later on.
// Splitting the input on '-' to seperate the number of paddin 0s and the actual hex code.
var compressedArr = compressed.split('-');
var paddingAmount = compressedArr[0]; // Setting a variable equal to the amount of leading 0s used while compressing.
compressed = compressedArr[1]; // Setting the compressed variable to the actual hex code.
// Decompressing further compressed characters.
compressed = compressed// Decompressing the further compressed 0s. (even further then the rest of the chars.)
.replace(/Z/g, 'zz')
.replace(/z/g, 'YY')
.replace(/Y/g, 'yy')
.replace(/y/g, 'XX')
.replace(/X/g, 'xx')
.replace(/x/g, 'WW')
.replace(/W/g, 'ww')
.replace(/w/g, 'GG')
.replace(/G/g, 'gg')
.replace(/g/g, '00')
// Rest of chars...
.replace(/H/g, 'hh')
.replace(/h/g, '11')
.replace(/I/g, 'ii')
.replace(/i/g, '22')
.replace(/J/g, 'jj')
.replace(/j/g, '33')
.replace(/K/g, 'kk')
.replace(/k/g, '44')
.replace(/L/g, 'll')
.replace(/l/g, '55')
.replace(/M/g, 'mm')
.replace(/m/g, '66')
.replace(/N/g, 'nn')
.replace(/n/g, '77')
.replace(/O/g, 'oo')
.replace(/o/g, '88')
.replace(/P/g, 'pp')
.replace(/p/g, '99')
.replace(/Q/g, 'qq')
.replace(/q/g, 'aa')
.replace(/R/g, 'rr')
.replace(/r/g, 'bb')
.replace(/S/g, 'ss')
.replace(/s/g, 'cc')
.replace(/T/g, 'tt')
.replace(/t/g, 'dd')
.replace(/U/g, 'uu')
.replace(/u/g, 'ee')
.replace(/V/g, 'vv')
.replace(/v/g, 'ff');
for (var i = 0; i < parseInt(compressed.length / 2); i++) {
// Determining the substring.
var substring = compressed.substr(i*2, 2);
// Determining the binValue of this hex substring.
var binValue = parseInt(substring, 16).toString(2);
// If the length of the binary value is not equal to 8 we add leading 0s (js deletes the leading 0s)
// For instance the binary number 00011110 is equal to the hex number 1e,
// but simply running the code above will return 11110. So we have to add the leading 0s back.
if (binValue.length != 8) {
// Determining how many 0s to add:
var diffrence = 8 - binValue.length;
// Adding the 0s:
for (var j = 0; j < diffrence; j++) {
binValue = '0'+binValue;
}
}
// Adding the binValue to the end string which we will return.
returnValue += binValue
}
var decompressedArr = returnValue.split('');
returnValue = ''; // Emptying the return variable.
// Deleting the not needed leading 0s used as padding.
for (var i = paddingAmount; i < decompressedArr.length; i++) {
returnValue += decompressedArr[i];
}
// Returning the decompressed string.
return returnValue;
}
URL shortener
I still found the "compressed" strings a little long for sharing / pasting around. So i used a simple URL shortener (view here) to make this process a little easier for the user.
Now you might ask, then why did you need to compress this string anyway?
Here's why:
First of all, my project is hosted on github pages (gh-pages). The info page of gh-pages tells us that the url can't be any longer than 2000 chars. This would mean that the max grid size would be the square root of 2000 - length of the base url, which isn't that big. By using this "compression" we are able to share much larger grids.
Now the second reason why is that, it's a challange. I find dealing with problems like these fun and also helpfull since you learn a lot.
Live
You can view the live version of my project here. and/or find the github repository here.
Thankyou
I want to thank everyone who helped me with this problem. Especially Corstian and Arnauld, since i ended up using their answers to reach my final functions.
Sooooo.... thanks guys! apriciate it!
In the Game of Life there is a board of ones and zeros. I want to back up to previous generation - size 4800 - save each 16 cells as hexadecimal = 1/4 the size. http://innerbeing.epizy.com/cwebgl/gameoflife.html [g = Go] [b = Backup]
function drawGen(n) {
stop(); var i = clamp(n,0,brw*brh-1), hex = gensave[i].toString();
echo(":",i, n,nGEN); nGEN = i; var str = '';
for (var i = 0; i < parseInt(hex.length / 4); i++)
str = str + pad(parseInt(hex.substr(i*4,4), 16).toString(2),16,'0');
for (var j=0;j<Board.length;j++) Board[j] = intr(str.substr(j,1));
drawBoard();
}
function Bin2Hex(n) {
var i = n.indexOf("1"); /// leading Zeros = NAN
if (i == -1) return "0000";
i = right(n,i*-1);
return pad(parseInt(i,2).toString(16),4,'0');
}
function saveGen(n) {
var b = Board.join(''), str = ''; /// concat array to string 10101
for (var i = 0; i < parseInt(b.length / 16); i++)
str = str + Bin2Hex(b.substr(i*16,16));
gensave[n] = str;
}
function right(st,n) {
var s = st.toString();
if (!n) return s;
if (n < 0) return s.substr(n * -1,s.length + n);
return s.substr(s.length - n,n);
}
function pad(str, l, padwith) {
var s = str;
while (s.length < l) s = padwith + s;
return s;
}
When I want to convert a binary string to a base 10 decimal (Like this: parseInt('0001010', 2)), Javascript returns a decimal number, but a version in which the leading zeros mentioned in the example above have been disregarded. Is there any way to fix this?
So supposing you have the number '00000101101101':
var number = '00000101101101';
var length = number.length;
var decimal_number = parseInt(number, 2);
// going back
var new_number = decimal_number.toString(2);
var new_length = new_number.length;
var n_zeros = length - new_length;
var zeros = (n_zeros >= 2 ? Array(n_zeros+1).join("0") : "0");
new_number = zeros + new_number;
The decimal representation has no way to keep track of leading zeros. If you wish to keep the leading zeros in the result, you need a fundamentally different approach (e.g. keeping the output as a string).
Alternatively, if you know the width of the result a priori, you could just pad it with leading zeros on output.
I want to truncate numbers (given as strings) to a fixed number of decimal places. The numbers can be negative (with a minus sign), positive (no sign). I'd prefer to round the numbers properly and keep trailing zeroes. I want the same number of decimal places, no matter how long the whole number is. The numbers will be stored back as strings.
For example:
140.234234234 -> 140.234
1.123123 -> 1.123
-12.789789 -> -12.790
First parse them as floats, then format with toFixed:
var nums = [
"140.234234234", // -> 140.234
"1.123123", // -> 1.123
"-12.789789" // -> -12.790
];
nums.forEach(function(n) {
console.log(parseFloat(n).toFixed(3));
});
http://codepen.io/anon/pen/IvxmA
Any number can be displayed as a fixed decimal place string by using .toFixed:
var num = 140.234234234;
var fixedDecimalPlace = num.toFixed(3); // is "140.234"
function truncate( numberString, trunk ) {
var onpoint = numberString.split('.',2);
var numberStringTruncated = numberString;
if (onpoint.length > 1) {
numberStringTruncated = onpoint[0] + '.' + onpoint[1].substring(0,trunk);
}
return numberStringTruncated;
}
This does not consider rounding or padding. As the other answer suggested, you should use parseFloat followed by toFixed