So I am very very new to JavaScript and unfortunately I don't know the basics too well also.
I was working on a code to make an element hidden after clicking it and again reversing back the effect by clicking the same button but I am unable to do so. Please help me here is the code:
$(function() {
$('#boxclose').click(function(){
$('#md-share-window').animate({'bottom':'-90px'},500,function(){});
});
});
You can use a class to identify the state of the element you are animating.
Here's an example: http://jsfiddle.net/FgDaq/
$('#boxclose').click(function() {
var c = 'on',
el = '#md-share-window',
duration = 500;
if ($(el).hasClass(c)) {
$(el).animate({'bottom': 0}, duration)
.removeClass(c);
} else {
$(el).animate({'bottom': '-90px'}, duration)
.addClass(c);
}
});
You'll need to get the initial position (or hard code it) and keep track of whether you are in the initial or updated position:
$(function() {
var shareWindow = $('#md-share-window');
var initialPosition = shareWindow.css('bottom'); //get initial position
var atInitialPos = true; //whether this is the initial or updated position
$('#boxclose').on('click', function(){
var newPosition = atInitialPos ? '-90px' : initialPosition; //determines new position
shareWindow.animate({'bottom': newPosition}, 500);
atInitialPos = !atInitialPos; //toggle initial position boolean
});
});
Related
I'm using scrollify to swap out fixed position components, and adding/removing classes to animate the transition. I have everything working as I'd like as you progress forward through the scroll, but when you scroll up to see a previous section, its not removing the previous class, and the previous section now animates in behind it.
I don't think the prev method will be of use, because it doesn't call the previous section your were at, only the previous section assuming you are always moving forward.
Here is my code below, you can move forward just fine, but trying to go backwards presents a problem as the new current section will load behind the previous one, and the previous one will still be visible.
jsfilddle here
var wrapper = $('.wrapper');
var currentPosition = 0;
$(wrapper).each(function(index) {
if (currentPosition != index) {
$(this).css('opacity', 0);
} else if (currentPosition == index) {
$(this).css('opacity', 1);
}
});
$(function() {
$.scrollify({
section: ".wrapper",
scrollSpeed: 700,
setHeights: false,
after: function(index, sections) {
var prevWrapper = $.scrollify.current().prev();
var currentWrapper = $.scrollify.current();
var nextWrapper = $.scrollify.current().next();
$(prevWrapper).removeClass('wrapper-enter').addClass('wrapper-leave');
$(currentWrapper).removeClass('wrapper-leave').addClass('wrapper-enter');
},
});
});
The issue is depending on scrolling up or down your "next" or "prev" may not actually be what you think so you are hiding classes incorrectly.
What you could do as scrollify doesn't have an option to detect scroll direction is to create a super quick variable that will detect if you are scrolling up or down. Then simply update your classes then in the after function.
$.scrollify({
section: ".wrapper",
scrollSpeed: 700,
setHeights: false,
after: function(index, sections) {
var prevWrapper = $.scrollify.current().prev();
var currentWrapper = $.scrollify.current();
var nextWrapper = $.scrollify.current().next();
let elem = null;
// Add wrapper-enter to current element.
$(currentWrapper).removeClass('wrapper-leave').addClass('wrapper-enter');
if(lastIndex < index) {
// Scolled down if lastIndex < index
elem = prevWrapper;
} else {
// Scrolled up if last index > index
elem = nextWrapper;
}
$(elem).removeClass('wrapper-enter').addClass('wrapper-leave');
lastIndex = index;
},
In the above I simply created a variable to track the last index.
Here is a working fiddle: https://jsfiddle.net/k1e6x79f/
As the title suggests I want to detect the start and end of a scrollable element built using overflow.
The following code works:
var scrollAmount = 150;
var scrollBox = $('.js-compare_scroll');
var arrowLeft = $('.js-compare_scroll_left');
var arrowRight = $('.js-compare_scroll_right');
var inactive = 'm-inactive';
$(arrowLeft).on('click', function () {
$(this).parent().find(scrollBox).stop().animate({
scrollLeft: '-='+scrollAmount
}, function() {
arrowRight.removeClass(inactive);
if(scrollBox.scrollLeft() === 0) {
arrowLeft.addClass(inactive);
}
});
});
$(arrowRight).on('click', function () {
$(this).parent().find(scrollBox).stop().animate({
scrollLeft: '+='+scrollAmount
}, function() {
arrowLeft.removeClass(inactive);
if(scrollBox.scrollLeft() + scrollBox.innerWidth() >= scrollBox[0].scrollWidth) {
arrowRight.addClass(inactive);
}
});
});
However the class to style the inactive colour of the arrows only appears once the animation completes. I need to add the class before the animation completes because it has a delay. I believe by default it is 400.
Is there anyway to detect this and apply the arrow classes where needed?
Thanks.
Came back from a break and realised I should take the checking if its at the end off the click event and onto a scroll event. This works a lot better now.
Is there a way to affect a div that is out of view? Ex: when you scroll down the page and the div is no longer visible.
I have an embedded youtube video and I would like to mute it only when the video is no longer in view.
This will mute every video player that is not visible:
$(function() {
var $w = $(window), oldw = 0, oldh = 0, oldt = 0;
function checkVideoVisible() {
if (oldw !== $w.width() || oldh !== $w.height() ||
oldt !== $w.scrollTop()) {
oldw = $w.width();
oldh = $w.height();
oldt = $w.scrollTop();
var top = oldt, bottom = oldt + oldh;
$("video").each(function() {
var $this = $(this);
if ($this.offset().top + $this.height() >= top &&
$this.offset().top < bottom) {
$this.prop("muted", false);
} else {
$this.prop("muted", true);
}
});
}
}
Now to trigger the checking, you can either use a timer:
var timerId = setInterval(checkVideoVisible, 200);
}
Or handle the scroll event:
$w.on("scroll", checkVideoVisible);
}
In the latter case, you will also need to perform a check when any change is made to the dom.
Use this as its probably your best bet im guessing as you;ve posted no code that a pre-written lib will help you
JQ Visible Lib
To implement you need to give your element an id and reference it in script tags or in a js file like this:
$('#element').visible() will return true if visible.
You can then add the part to mute/pause the video based on that state.
I am trying to implement synchronized scrolling for two DIV with the following code.
DEMO
$(document).ready(function() {
$("#div1").scroll(function () {
$("#div2").scrollTop($("#div1").scrollTop());
});
$("#div2").scroll(function () {
$("#div1").scrollTop($("#div2").scrollTop());
});
});
#div1 and #div2 is having the very same content but different sizes, say
#div1 {
height : 800px;
width: 600px;
}
#div1 {
height : 400px;
width: 200px;
}
With this code, I am facing two issues.
1) Scrolling is not well synchronized, since the divs are of different sizes. I know, this is because, I am directly setting the scrollTop value. I need to find the percentage of scrolled content and calculate corresponding scrollTop value for the other div. I am not sure, how to find the actual height and current scroll position.
2) This issue is only found in firefox. In firefox, scrolling is not smooth as in other browsers. I think this because the above code is creating a infinite loop of scroll events.
I am not sure, why this is only happening with firefox. Is there any way to find the source of scroll event, so that I can resolve this issue.
Any help would be greatly appreciated.
You can use element.scrollTop / (element.scrollHeight - element.offsetHeight) to get the percentage (it'll be a value between 0 and 1). So you can multiply the other element's (.scrollHeight - .offsetHeight) by this value for proportional scrolling.
To avoid triggering the listeners in a loop you could temporarily unbind the listener, set the scrollTop and rebind again.
var $divs = $('#div1, #div2');
var sync = function(e){
var $other = $divs.not(this).off('scroll'), other = $other.get(0);
var percentage = this.scrollTop / (this.scrollHeight - this.offsetHeight);
other.scrollTop = percentage * (other.scrollHeight - other.offsetHeight);
// Firefox workaround. Rebinding without delay isn't enough.
setTimeout( function(){ $other.on('scroll', sync ); },10);
}
$divs.on( 'scroll', sync);
http://jsfiddle.net/b75KZ/5/
Runs like clockwork (see DEMO)
$(document).ready(function(){
var master = "div1"; // this is id div
var slave = "div2"; // this is other id div
var master_tmp;
var slave_tmp;
var timer;
var sync = function ()
{
if($(this).attr('id') == slave)
{
master_tmp = master;
slave_tmp = slave;
master = slave;
slave = master_tmp;
}
$("#" + slave).unbind("scroll");
var percentage = this.scrollTop / (this.scrollHeight - this.offsetHeight);
var x = percentage * ($("#" + slave).get(0).scrollHeight - $("#" + slave).get(0).offsetHeight);
$("#" + slave).scrollTop(x);
if(typeof(timer) !== 'undefind')
clearTimeout(timer);
timer = setTimeout(function(){ $("#" + slave).scroll(sync) }, 200)
}
$('#' + master + ', #' + slave).scroll(sync);
});
This is what I'm using. Just call the syncScroll(...) function with the two elements you want to synchronize. I found pawel's solution had issues with continuing to slowly scroll after the mouse or trackpad was actually done with the operation.
See working example here.
// Sync up our elements.
syncScroll($('.scroll-elem-1'), $('.scroll-elem-2'));
/***
* Synchronize Scroll
* Synchronizes the vertical scrolling of two elements.
* The elements can have different content heights.
*
* #param $el1 {Object}
* Native DOM element or jQuery selector.
* First element to sync.
* #param $el2 {Object}
* Native DOM element or jQuery selector.
* Second element to sync.
*/
function syncScroll(el1, el2) {
var $el1 = $(el1);
var $el2 = $(el2);
// Lets us know when a scroll is organic
// or forced from the synced element.
var forcedScroll = false;
// Catch our elements' scroll events and
// syncronize the related element.
$el1.scroll(function() { performScroll($el1, $el2); });
$el2.scroll(function() { performScroll($el2, $el1); });
// Perform the scroll of the synced element
// based on the scrolled element.
function performScroll($scrolled, $toScroll) {
if (forcedScroll) return (forcedScroll = false);
var percent = ($scrolled.scrollTop() /
($scrolled[0].scrollHeight - $scrolled.outerHeight())) * 100;
setScrollTopFromPercent($toScroll, percent);
}
// Scroll to a position in the given
// element based on a percent.
function setScrollTopFromPercent($el, percent) {
var scrollTopPos = (percent / 100) *
($el[0].scrollHeight - $el.outerHeight());
forcedScroll = true;
$el.scrollTop(scrollTopPos);
}
}
If the divs are of equal sizes then this code below is a simple way to scroll them synchronously:
scroll_all_blocks: function(e) {
var scrollLeft = $(e.target)[0].scrollLeft;
var len = $('.scroll_class').length;
for (var i = 0; i < len; i++)
{
$('.scroll_class')[i].scrollLeft = scrollLeft;
}
}
Here im using horizontal scroll, but you can use scrollTop here instead. This function is call on scroll event on the div, so the e will have access to the event object.
Secondly, you can simply have the ratio of corresponding sizes of the divs calculated to apply in this line $('.scroll_class')[i].scrollLeft = scrollLeft;
I solved the sync scrolling loop problem by setting the scroll percentage to fixed-point notation: percent.toFixed(0), with 0 as the parameter. This prevents mismatched fractional scrolling heights between the two synced elements, which are constantly trying to "catch up" with each other. This code will let them catch up after at most a single extra step (i.e., the second element may continue to scroll an extra pixel after the user stops scrolling). Not a perfect solution or the most sophisticated, but certainly the simplest I could find.
var left = document.getElementById('left');
var right = document.getElementById('right');
var el2;
var percentage = function(el) { return (el.scrollTop / (el.scrollHeight - el.offsetHeight)) };
function syncScroll(el1) {
el1.getAttribute('id') === 'left' ? el2 = right : el2 = left;
el2.scrollTo( 0, (percentage(el1) * (el2.scrollHeight - el2.offsetHeight)).toFixed(0) ); // toFixed(0) prevents scrolling feedback loop
}
document.getElementById('left').addEventListener('scroll',function() {
syncScroll(this);
});
document.getElementById('right').addEventListener('scroll',function() {
syncScroll(this);
});
I like pawel's clean solution but it lacks something I need and has a strange scrolling bug where it continues to scroll and my plugin will work on multiple containers not just two.
http://www.xtf.dk/2015/12/jquery-plugin-synchronize-scroll.html
Example & demo: http://trunk.xtf.dk/Project/ScrollSync/
Plugin: http://trunk.xtf.dk/Project/ScrollSync/jquery.scrollSync.js
$('.scrollable').scrollSync();
If you don't want proportional scrolling, but rather to scroll an equal amount of pixels on each field, you could add the value of change to the current value of the field you're binding the scroll-event to.
Let's say that #left is the small field, and #right is the bigger field.
var oldRst = 0;
$('#right').on('scroll', function () {
l = $('#left');
var lst = l.scrollTop();
var rst = $(this).scrollTop();
l.scrollTop(lst+(rst-oldRst)); // <-- like this
oldRst = rst;
});
https://jsfiddle.net/vuvgc0a8/1/
By adding the value of change, and not just setting it equal to #right's scrollTop(), you can scroll up or down in the small field, regardless of its scrollTop() being less than the bigger field. An example of this is a user page on Facebook.
This is what I needed when I came here, so I thought I'd share.
From the pawel solution (first answer).
For the horizzontal synchronized scrolling using jQuery this is the solution:
var $divs = $('#div1, #div2'); //only 2 divs
var sync = function(e){
var $other = $divs.not(this).off('scroll');
var other = $other.get(0);
var percentage = this.scrollLeft / (this.scrollWidth - this.offsetWidth);
other.scrollLeft = percentage * (other.scrollWidth - other.offsetWidth);
setTimeout( function(){ $other.on('scroll', sync ); },10);
}
$divs.on('scroll', sync);
JSFiddle
An other solution for multiple horizontally synchronized divs is this, but it works for divs with same width.
var $divs = $('#div1, #div2, #div3'); //multiple divs
var sync = function (e) {
var me = $(this);
var $other = $divs.not(me).off('scroll');
$divs.not(me).each(function (index) {
$(this).scrollLeft(me.scrollLeft());
});
setTimeout(function () {
$other.on('scroll', sync);
}, 10);
}
$divs.on('scroll', sync);
NB: Only for divs with same width
JSFiddle
I basically have a div with set dimensions and overflow: hidden. That div contains 7 child divs (but only shows one at a time) that I would like to be smoothly scrolled through vertically when their respective links are hovered.
However, the first section (div) doesn't have a link and is the default section when no link is hovered.
Take a look at this jsFiddle to see a basic structure of what I'm talking about: http://jsfiddle.net/YWnzc/
I've attempted to accomplish this with jQuery scrollTo but haven't been able to get it to work.
Any help would be greatly appreciated. Thanks.
Something like this?
http://jsfiddle.net/YWnzc/5/
code:
jQuery("#nav").delegate("a", "mouseenter mouseleave", function (e) {
var i, self = this,
pos;
if (e.type == "mouseleave") {
i = 0;
}
else {
//Find out the index of the a that was hovered
jQuery("#nav a").each(function (index) {
if (self === this) {
i = index + 1; //the scrollTop is just calculated from this by a multiplier, so increment
return false;
}
});
}
//Find out if the index is a valid number, could be left undefined
if (i >= 0) {
//stop the previous animation, otherwise it will be queued
jQuery("#wrapper").stop().animate({
scrollTop: i * 200
}, 500);
//I would retrieve .offsetTop, but it was reporting false values :/
}
e.preventDefault();
});
FYI : That JSFIDDLE you sent me to went to MooTools framework, not jQuery... fyi. (might be why its not working?
Copy and paste this code exactly and it will work in jQuery for animated scrolling.
Try this for smooth scrolling within the DIV, I tested it - it works great. You
$(function() {
function filterPath(string) {
return string
.replace(/^\//,'')
.replace(/(index|default).[a-zA-Z]{3,4}$/,'')
.replace(/\/$/,'');
}
var locationPath = filterPath(location.pathname);
var scrollElem = scrollableElement('#wrapper');
// Any links with hash tags in them (can't do ^= because of fully qualified URL potential)
$('a[href*=#]').each(function() {
// Ensure it's a same-page link
var thisPath = filterPath(this.pathname) || locationPath;
if ( locationPath == thisPath
&& (location.hostname == this.hostname || !this.hostname)
&& this.hash.replace(/#/,'') ) {
// Ensure target exists
var $target = $(this.hash), target = this.hash;
if (target) {
// Find location of target
var targetOffset = $target.offset().top;
$(this).click(function(event) {
// Prevent jump-down
event.preventDefault();
// Animate to target
$(scrollElem).animate({scrollTop: targetOffset}, 400, function() {
// Set hash in URL after animation successful
location.hash = target;
});
});
}
}
});
// Use the first element that is "scrollable" (cross-browser fix?)
function scrollableElement(els) {
for (var i = 0, argLength = arguments.length; i <argLength; i++) {
var el = arguments[i],
$scrollElement = $(el);
if ($scrollElement.scrollTop()> 0) {
return el;
} else {
$scrollElement.scrollTop(1);
var isScrollable = $scrollElement.scrollTop()> 0;
$scrollElement.scrollTop(0);
if (isScrollable) {
return el;
}
}
}
return [];
}
});
FYI : Credit for this code does not go to me as an individual developer, although I did slightly tweak the code. The owner and creator of this code is Chris Coyier and you can find more about this scrolling code here:
http://css-tricks.com/snippets/jquery/smooth-scrolling/
Here's a working example: http://jsfiddle.net/YWnzc/7/
And the code (pretty similar to rizzle's, with a couple changes that I'll explain):
$('a').hover(function(){
var selector = $(this).data('section');
var scrollAmount = $(selector).offset().top + $('#wrapper')[0].scrollTop - 129;
$('#wrapper').animate({scrollTop: scrollAmount}, 250);
},function(){
$('#wrapper').animate({scrollTop: 0}, 250);
});
First, var selector = $(this).data('section'); because in jsFiddle, the href attribute was returning the full path of the page + the hash. So I changed it to an html5 data attribute (data-section).
The next line is similar to rizzle's, except that we grab the offset of the section and add it to the current scrollTop value of the #wrapper. As he pointed out, there are some weird offset issues going on still, and I found that subtracting 129 did the trick. While this 129 number might seem like something that is likely to break, I did test out changing the sizes of the sections, making them not equal, etc, and it continued to work. I'm using Chrome, and perhaps a non-webkit browser would need a different constant to subtract. But it does seem like that 129 number is at least some kind of constant.
The rest should be pretty self-explanatory.
One thing to note: as you move your cursor over the <a> tags, the content of the #wrapper div will seem to jump around, but that's just because the mouseleave part of the hover event briefly gets triggered as the cursor moves. I'm sure you can solve that one though :)
$("#nav a").hover(function () {
var sectionName = $(this).attr("href");
var sectionPos = $(sectionName).offset().top;
var wrapperPos = $("#wrapper").offset().top;
var wrapperScroll = $("#wrapper").scrollTop();
var scrollPos = sectionPos - wrapperPos + wrapperScroll;
$("#wrapper").stop().animate({scrollTop:scrollPos}, 600);
}, function () { $("#wrapper").stop().animate({scrollTop:0}, 600); });