Using Selectize.js, I'm trying to initialize the dynamically pre-select one of the item of the list without triggering the onItemAdd event. In the following code, the event is triggered even if the silent parameter is truthy:
$(function () {
$('select').selectize({
onItemAdd: function () {
alert("Add item");
}
});
// this triggers an the event
$('select')[0].selectize.addItem('2', true);
});
JSFiddle: http://jsfiddle.net/zuzat0dc/1/
According to the documentation:
addItem(value, silent): "Selects" an item. Adds it to the list at the current caret position. If "silent" is truthy, no change event will be fired on the original input.
Any idea how to avoid triggering the onItemAdd event? Is the silent parameter b0rked or should I use the change event instead?
A quick fix that worked for me was to keep a state flag and refer to it in the event handler...
$(function () {
var initialising = true;
$('select').selectize({
onItemAdd: function () {
if(!initialising) {
alert("Add item");
}
}
});
// this triggers an the event
$('select')[0].selectize.addItem('2', true);
initialising = false;
});
The silent parameter in addItem(value, silent) affects only to the fact whether or not the change event. You can't avoid item_add event with silent = true.
The only thing that worked for me was to store item_add event locally, remove it from selectize instance and set it back after I added the item:
onItemAdd: function(val) {
var e = this._events['item_add'];
delete this._events['item_add'];
this.addItem(123);
this._events['item_add'] = e;
}
So here is my code
prev
prev
How do I make it both click if I click any of it ?
If I click .slider-1-prev, at the same I click .slider-2-prev
If I click .slider-2-prev, at the same I click .slider-2-prev
How to make it by javascript ?
As well as triggering the event on the other link, you need to shield against infinite repeating (e.g. with a shield variable):
var inClick = false;
$(document).ready(function {
$('.slider-1-prev').on('click', function {
if (!inClick) {
inClick = true;
$('.slider-2-prev').trigger('click');
inClick = false;
}
});
$('.slider-2-prev').on('click', function {
if (!inClick) {
inClick = true;
$('.slider-1-prev').trigger('click');
inClick = false;
}
});
})
If you want a shorter version, you can listen for both on one handler and click "the other":
var inClick = false;
$(document).ready(function {
var $sliders = $('.slider-1-prev,.slider-2-prev');
$sliders.on('click', function {
if (!inClick) {
inClick = true;
// Click the one that was not clicked (not this)
$sliders.not(this).trigger('click');
inClick = false;
}
});
})
Another option is a bit more complicated as you need to turn the handler off and then on again. Stick with this simple one for now.
The on/off approach involves disabling the handling while executing it, so that it will not trigger again until you reconnect it. The downside is you need to reference a separate function so that it can effectively reference itself:
$(document).ready(function {
var $sliders = $('.slider-1-prev,.slider-2-prev');
// Define separate named function
var clickTheOtherOne = function(){
// Disable the click
$sliders.off('click');
// Click the one that was not clicked (not this)
$sliders.not(this).trigger('click');
// Reenable the click handler
$sliders.on('click', clickTheOtherOne);
}
// Initial enabling of the handler
$sliders.on('click', clickTheOtherOne);
});
If they're going to behave the same, why not define only one function for both?
$('.slider-1-prev, .slider-2-prev').click(function(){
//... mutual code
});
I can't figure why you need to do what you ask, but try this approach:
js code:
// this will work on all classes that start with 'slider-prev'
$('*[class^="slider-prev"]').on('click',function{
// do something
});
Of course you will need to alter your htm code to:
prev
prev
this should do the trick
$(document).ready(function{
$('.slider-1-prev').on('click',function{
$('.slider-2-prev').trigger('click');
});
$('.slider-2-prev').on('click',function{
$('.slider-1-prev').trigger('click');
});
})
Try this -
$('.slider-1-prev').click(function(){
$('.slider-2-prev').trigger('click');
});
// If you need the opposite, then do -
$('.slider-2-prev').click(function(){
$('.slider-1-prev').trigger('click');
});
I'm trying to figure out how events works and how to wait for a second event to trigger before the original event is being executed.
$.fn.customConfirm = function (message){
// Create modal
// then ...
$(confirmModal).find("modal-footer a").click(function(e2){
e2.preventDefault();
return ($(this).hasClass("dialogConfirm")); // Returns true if option has class dialogConfirm
});
};
$("a[data-confirm]", click(function(e){
if (!$.customConfirm($(this).attr("data-confirm")))
return false; // Only if customConfirm returns false
// Continue
});
This works like a charm. customConfirm creates a bootstrap modal with 2 buttons (confirm/cancel) and sets the data-confirm attribute value as the modal-body html.
What I don't know how to solve is how to handle the event e based on the user interaction with the modal. As of now it just shows the modal dialog and the original event seems to do nothing.
I solved it by adding the attribute data-confirmed to the clicked element if the user confirms and then triggering a second click() on the original element.
$.fn.customConfirm = function (message){
var handle = $(this);
// Create modal
// then ...
$(confirmModal).find("modal-footer a").click(function(e2){
e2.preventDefault();
$(handle).attr("data-confirmed", ($(this).hasClass("dialogConfirm")))[0].click();
return false;
});
};
$("a[data-confirm]").click(function(e){
if ($(this).attr("data-confirmed") !== "true")
{
e.preventDefault();
$(this).customConfirm();
return false;
}
$(this).removeAttr("data-confirmed");
// Continue
});
I have created a fiddle of my function here( http://jsfiddle.net/rhy5K/10/ ) . Now i want to disable the button click i.e play/pause if the sound is playing like Get ready,5,4,3,2,1 .
I know only how to disable the form submit button , but I am very confused how to disable the click in my case the hyperlinks.
Explanation using code example:
I want to disable this
PLAY
click, while interpreter is executing the below code:
var playGetReady = function (done) {
var ids = ['audiosource', 'a_5', 'a_4', 'a_3', 'a_2', 'a_1'],
playNext = function () {
var id = ids.shift();
document.getElementById(id).play();
if (ids.length) {
setTimeout(playNext, 1000);
} else {
done();
}
};
playNext();
};
Warning: This JS fiddle demo may play sound on load
You may try this (Changes in following function), but not sure if this is you want and maybe there are other ways to do it.
App.prototype.start = function () {
var self = this;
// unbind for a while
self.$button.unbind('click', self.buttonHandler); // <--
var start = function () {
// start countdown
self.intervalHandle = setInterval($.proxy(self.tick, self), 1000);
// bind again
self.$button.click($.proxy(self.buttonHandler, self)); // <--
// change button text to PAUSE
self.$button.text('PAUSE');
};
if (this.newTimer) {
playGetReady(start);
} else {
start();
}
};
DEMO.
In jquery, it can be done easily by cancel default action. Here's the sample.
$("#btn_start").click(function(event){
if(not_active_flag){
// Prevent anchor to active
return false;
}else{
// Anchor active as usual
return true;
}
});
In your case, the link will ultimately call this.buttonHandler, which has the following code:
App.prototype.buttonHandler = function (e) {
e.preventDefault(); // prevent anchor default action
this.toggle(); // toggle play/pause
};
Because buttonHandler is attached before playGetReady is executed, it is not possible to let playGetReady attach a click handler to that anchor element that uses .stopImmediatePropagation() to prevent the other click handler from executing.
In this case #gp.'s solution in the comments is most likely the best solution. In your case you might even be able to use a local variable in your app. If you use a global variable, reference it with window.yourglobalvariable. If you use a local variable, make sure you define it somewhere and reference it with this.yourvariable. Change your buttonHandler to:
App.prototype.buttonHandler = function (e) {
e.preventDefault(); // prevent anchor default action
if( this.soundready )
this.toggle(); // toggle play/pause
};
On the appropiate place make this variable false to prevent the 'button' from working. When the button should work, change the variable to true. I think that should be just before done() in the code you have in your question, but you probably have a better idea in what order the code is executed.
Once I've fired an evt.preventDefault(), how can I resume default actions again?
As per commented by #Prescott, the opposite of:
evt.preventDefault();
Could be:
Essentially equating to 'do default', since we're no longer preventing it.
Otherwise I'm inclined to point you to the answers provided by another comments and answers:
How to unbind a listener that is calling event.preventDefault() (using jQuery)?
How to reenable event.preventDefault?
Note that the second one has been accepted with an example solution, given by redsquare (posted here for a direct solution in case this isn't closed as duplicate):
$('form').submit( function(ev) {
ev.preventDefault();
//later you decide you want to submit
$(this).unbind('submit').submit()
});
function(evt) {evt.preventDefault();}
and its opposite
function(evt) {return true;}
cheers!
To process a command before continue a link from a click event in jQuery:
Eg: Click me
Prevent and follow through with jQuery:
$('a.myevent').click(function(event) {
event.preventDefault();
// Do my commands
if( myEventThingFirst() )
{
// then redirect to original location
window.location = this.href;
}
else
{
alert("Couldn't do my thing first");
}
});
Or simply run window.location = this.href; after the preventDefault();
OK ! it works for the click event :
$("#submit").click(function(event){
event.preventDefault();
// -> block the click of the sumbit ... do what you want
// the html click submit work now !
$("#submit").unbind('click').click();
});
event.preventDefault(); //or event.returnValue = false;
and its opposite(standard) :
event.returnValue = true;
source:
https://developer.mozilla.org/en-US/docs/Web/API/Event/returnValue
I had to delay a form submission in jQuery in order to execute an asynchronous call. Here's the simplified code...
$("$theform").submit(function(e) {
e.preventDefault();
var $this = $(this);
$.ajax('/path/to/script.php',
{
type: "POST",
data: { value: $("#input_control").val() }
}).done(function(response) {
$this.unbind('submit').submit();
});
});
I would suggest the following pattern:
document.getElementById("foo").onsubmit = function(e) {
if (document.getElementById("test").value == "test") {
return true;
} else {
e.preventDefault();
}
}
<form id="foo">
<input id="test"/>
<input type="submit"/>
</form>
...unless I'm missing something.
http://jsfiddle.net/DdvcX/
This is what I used to set it:
$("body").on('touchmove', function(e){
e.preventDefault();
});
And to undo it:
$("body").unbind("touchmove");
There is no opposite method of event.preventDefault() to understand why you first have to look into what event.preventDefault() does when you call it.
Underneath the hood, the functionality for preventDefault is essentially calling a return false which halts any further execution. If you’re familiar with the old ways of Javascript, it was once in fashion to use return false for canceling events on things like form submits and buttons using return true (before jQuery was even around).
As you probably might have already worked out based on the simple explanation above: the opposite of event.preventDefault() is nothing. You just don’t prevent the event, by default the browser will allow the event if you are not preventing it.
See below for an explanation:
;(function($, window, document, undefined)) {
$(function() {
// By default deny the submit
var allowSubmit = false;
$("#someform").on("submit", function(event) {
if (!allowSubmit) {
event.preventDefault();
// Your code logic in here (maybe form validation or something)
// Then you set allowSubmit to true so this code is bypassed
allowSubmit = true;
}
});
});
})(jQuery, window, document);
In the code above you will notice we are checking if allowSubmit is false. This means we will prevent our form from submitting using event.preventDefault and then we will do some validation logic and if we are happy, set allowSubmit to true.
This is really the only effective method of doing the opposite of event.preventDefault() – you can also try removing events as well which essentially would achieve the same thing.
Here's something useful...
First of all we'll click on the link , run some code, and than we'll perform default action. This will be possible using event.currentTarget Take a look. Here we'll gonna try to access Google on a new tab, but before we need to run some code.
Google
<script type="text/javascript">
$(document).ready(function() {
$("#link").click(function(e) {
// Prevent default action
e.preventDefault();
// Here you'll put your code, what you want to execute before default action
alert(123);
// Prevent infinite loop
$(this).unbind('click');
// Execute default action
e.currentTarget.click();
});
});
</script>
None of the solutions helped me here and I did this to solve my situation.
<a onclick="return clickEvent(event);" href="/contact-us">
And the function clickEvent(),
function clickEvent(event) {
event.preventDefault();
// do your thing here
// remove the onclick event trigger and continue with the event
event.target.parentElement.onclick = null;
event.target.parentElement.click();
}
I supose the "opposite" would be to simulate an event. You could use .createEvent()
Following Mozilla's example:
function simulateClick() {
var evt = document.createEvent("MouseEvents");
evt.initMouseEvent("click", true, true, window,
0, 0, 0, 0, 0, false, false, false, false, 0, null);
var cb = document.getElementById("checkbox");
var cancelled = !cb.dispatchEvent(evt);
if(cancelled) {
// A handler called preventDefault
alert("cancelled");
} else {
// None of the handlers called preventDefault
alert("not cancelled");
}
}
Ref: document.createEvent
jQuery has .trigger() so you can trigger events on elements -- sometimes useful.
$('#foo').bind('click', function() {
alert($(this).text());
});
$('#foo').trigger('click');
This is not a direct answer for the question but it may help someone. My point is you only call preventDefault() based on some conditions as there is no point of having an event if you call preventDefault() for all the cases. So having if conditions and calling preventDefault() only when the condition/s satisfied will work the function in usual way for the other cases.
$('.btnEdit').click(function(e) {
var status = $(this).closest('tr').find('td').eq(3).html().trim();
var tripId = $(this).attr('tripId');
if (status == 'Completed') {
e.preventDefault();
alert("You can't edit completed reservations");
} else if (tripId != '') {
e.preventDefault();
alert("You can't edit a reservation which is already attached to a trip");
}
//else it will continue as usual
});
jquery on() could be another solution to this. escpacially when it comes to the use of namespaces.
jquery on() is just the current way of binding events ( instead of bind() ). off() is to unbind these. and when you use a namespace, you can add and remove multiple different events.
$( selector ).on("submit.my-namespace", function( event ) {
//prevent the event
event.preventDefault();
//cache the selector
var $this = $(this);
if ( my_condition_is_true ) {
//when 'my_condition_is_true' is met, the binding is removed and the event is triggered again.
$this.off("submit.my-namespace").trigger("submit");
}
});
now with the use of namespace, you could add multiple of these events and are able to remove those, depending on your needs.. while submit might not be the best example, this might come in handy on a click or keypress or whatever..
you can use this after "preventDefault" method
//Here evt.target return default event (eg : defult url etc)
var defaultEvent=evt.target;
//Here we save default event ..
if("true")
{
//activate default event..
location.href(defaultEvent);
}
You can always use this attached to some click event in your script:
location.href = this.href;
example of usage is:
jQuery('a').click(function(e) {
location.href = this.href;
});
In a Synchronous flow, you call e.preventDefault() only when you need to:
a_link.addEventListener('click', (e) => {
if( conditionFailed ) {
e.preventDefault();
// return;
}
// continue with default behaviour i.e redirect to href
});
In an Asynchronous flow, you have many ways but one that is quite common is using window.location:
a_link.addEventListener('click', (e) => {
e.preventDefault(); // prevent default any way
const self = this;
call_returning_promise()
.then(res => {
if(res) {
window.location.replace( self.href );
}
});
});
You can for sure make the above flow synchronous by using async-await
this code worked for me to re-instantiate the event after i had used :
event.preventDefault(); to disable the event.
event.preventDefault = false;
I have used the following code. It works fine for me.
$('a').bind('click', function(e) {
e.stopPropagation();
});