How can I trigger a function when I click anywhere on my page except on one div (id=menu_content) ?
You can apply click on body of document and cancel click processing if the click event is generated by div with id menu_content, This will bind event to single element and saving binding of click with every element except menu_content
$('body').click(function(evt){
if(evt.target.id == "menu_content")
return;
//For descendants of menu_content being clicked, remove this check if you do not want to put constraint on descendants.
if($(evt.target).closest('#menu_content').length)
return;
//Do processing of click event here for every element except with id menu_content
});
See the documentation for jQuery Event Target. Using the target property of the event object, you can detect where the click originated within the #menu_content element and, if so, terminate the click handler early. You will have to use .closest() to handle cases where the click originated in a descendant of #menu_content.
$(document).click(function(e){
// Check if click was triggered on or within #menu_content
if( $(e.target).closest("#menu_content").length > 0 ) {
return false;
}
// Otherwise
// trigger your click function
});
try this
$('html').click(function() {
//your stuf
});
$('#menucontainer').click(function(event){
event.stopPropagation();
});
you can also use the outside events
I know that this question has been answered, And all the answers are nice.
But I wanted to add my two cents to this question for people who have similar (but not exactly the same) problem.
In a more general way, we can do something like this:
$('body').click(function(evt){
if(!$(evt.target).is('#menu_content')) {
//event handling code
}
});
This way we can handle not only events fired by anything except element with id menu_content but also events that are fired by anything except any element that we can select using CSS selectors.
For instance in the following code snippet I am getting events fired by any element except all <li> elements which are descendants of div element with id myNavbar.
$('body').click(function(evt){
if(!$(evt.target).is('div#myNavbar li')) {
//event handling code
}
});
here is what i did. wanted to make sure i could click any of the children in my datepicker without closing it.
$('html').click(function(e){
if (e.target.id == 'menu_content' || $(e.target).parents('#menu_content').length > 0) {
// clicked menu content or children
} else {
// didnt click menu content
}
});
my actual code:
$('html').click(function(e){
if (e.target.id != 'datepicker'
&& $(e.target).parents('#datepicker').length == 0
&& !$(e.target).hasClass('datepicker')
) {
$('#datepicker').remove();
}
});
You could try this:
$(":not(#menu_content)").on("click", function(e) {
e.stopPropagation();
// Run your function when clicked anywhere except #menu_content
// Use with caution, 'cause it will prevent clicking on other elements
});
$("#menu_content").on("click", function(e) {
e.stopPropagation();
// Run when clicked on #menu_content
});
Related
I have a button with id of Strike but the JQUERY event doesn't seem to work? This event here worked previously, but ONLY if the button existed when the DOM loaded.
dom.el('Strike').onclick = strikeSkill;
Now I have my buttons dynamically generated, so the "Strike" button is generated later. So the previous code above no longer works, because Strike = Null.
I am using the Jquery .on function, filled up my arguments, but now when I click the strike button, nothing happens. No attacking. Why is this?
function strikeSkill() {
activeCheck();
if (upgradeActive == true){
radialSelector(strike);
}
if (upgradeActive == false){
HitCalc(player.cc, monster.cc);
actor.expCounter(player.cc);
actor.balanceCounter(player.cc, monster.cc);
}
};
$('#Strike').on('click', '#Strike', function() {
strikeSkill();
});
Your current event handler is looking for a #Strike element within #Strike, which is incorrect (not to mention would be invalid HTML).
You can fix this by using a static parent element for the primary selector:
$(document).on('click', '#Strike', function(){
strikeSkill();
});
In the example I used the document, however for best performance it should be the nearest static parent element to #Strike which is available when the DOM loads.
i got to show a dropdown menu, now i would like to hide that when anoher element (not dropdown or dropdown's children) in the DOM is focused.
(hide dropdpown when element !== dropdown||dropdown's childrens is focused in the DOM)
i tryed with focusout() with no results:
$('a').on('click',function(){
$('.drop.user-menu').fadeIn();
});
$('.drop.user-menu').on('focusout',function(){
$(this).fadeOut();
alert('antani');
});
any idea?
jsfiddle here : example
event.target() will be useful in this scenario:
$('.drop.user-menu').on('focusout',function(e){
if(e.target !== this){
$(this).fadeOut();
alert('antani');
}
});
Update:
Check this out and see if helps:
$('.a').on('click', function (e) {
e.stopPropagation();
$('.drop.user-menu').fadeToggle();
});
$('.drop.user-menu').on('click', function (e) {
e.stopPropagation();
$('.drop.user-menu').fadeIn();
});
$(document).on('click', function (e) {
if (e.target !== $('.drop.user-menu') && e.target !== $('.a')) {
$('.drop.user-menu').fadeOut();
}
});
The above script done with click in this fiddle
A DIV cannot take or lose focus (unless it has a tabindex). You'll have to give it a tabindex or add a focusable element into your div.drop.user-menu. See Which HTML elements can receive focus?.
You then also have to explicitly give that element (or an element within it) focus (with .focus()) as simply fading it in doesn't give it focus.
When the element blurs, then check if the new active element is still part of the menu. If it's not, fade out the menu.
See a working example.
There is no focus or focusout events triggered, because you're not operating on form fields.
This is probably what you want : How do I detect a click outside an element?
var menu = $('.drop.user-menu');
menu.on('click',function(e){
e.stopPropagation(); // stop clicks on menu from bubbling to document
});
$('a').on('click', function (e) {
menu.fadeIn();
e.stopPropagation(); // stop clicks on <a> from bubbling to document
});
$(document).on('click',function(e){
// any other click
if (menu.is(":visible")) {
menu.fadeOut();
}
});
http://jsfiddle.net/BBxEN/10/
Update
As Derek points out, this is not very friendly for keyboard users. Consider implementing a way for users to both open and close the menu using keyboard shortcuts.
You can tru with blur, is what you want?
Try this:
$('.drop.user-menu').on('blur',function(){
$(this).fadeOut();
alert('antani');
});
I have a div element containing a checkbox, when I click the div I want the checkbox to toggle.
I did this by assigning the following code to $(#div).click:
$(this).find(":checkbox").prop("checked", !$(this).find(":checkbox").prop("checked"));
The problem now is that if the checkbox itself is clicked, the code above is still executed and thus the checkbox stays in the same state.
How would I fix this?
The event is bubbling up, you need to stop event propogation, one way is
$('#myDiv :checkbox').click(function(e){
e.stopPropagation();
});
Edit
In case you want to handle the event at div use this
$('div').click(function(e) {
// check if the event was triggered by an input box
if (e.target.nodeName != "INPUT") {
$(this).find(":checkbox").prop("checked", !$(this).find(":checkbox").prop("checked"));
}
// do something else
alert('hey there!');
});
Demo - http://jsfiddle.net/QnbhX/
onclick() of div element, attach a javascript function which toggles the checkbox output. Isn't that a simpler way?
You should use a better selector like :
$('#myDiv').find(":checkbox").prop("checked", !$(this).find(":checkbox").prop("checked"));
<body>
<div id="aaa">
<div id="bbb">
</div>
</div>
</body>
$(#?????).click(function(){
$('#bbb').hide();
})
http://jsfiddle.net/GkRY2/
What i must use if i want hide #bbb if user click outside box #bbb? But if i click on div #bbb then box is still visible - only outside.
$('body').click(function(e){
if( e.target.id == 'bbb' )
{ return true; }
else
{ $('#bbb').hide(); }
});
A note of explanation: There are a few ways to do this, either way we need to listen for a click on a parent element, weather it be a direct parent like #aaa or a distant parent like the body or the document. This way we can capture clicks that occur outside of #bbb.
Now that we have that we need the .hide to NOT occur if the user did click inside of #bbb. We can do this two ways
Stop propagation if the user clicks on #bbb. This will make the click event not 'bubble' up to the parent. That way the click event never reaches the parent and so #bbb will not hide. I personally don't like this method because stop propagation will so ALL click events from bubbling, and you may have click events that you would like to bubble to a local parent and not a distant parent. Or you may have listeners delegated from a distant parent, which will stop working if click propagation is stopped.
Check for the #bbb element in the parent listener. This is the method shown above. Basically this listens on a distant parent, and when a click occurs it checks to see if that click is on #bbb specifically. If it IS NOT on #bbb .hide is fired, otherwise it returns true, so other things that may be tied into the click event will continue working. I prefer this method for that reason alone, but secondarily its a-little bit more readable and understandable.
Finally the manner in which you check to see if the click originated at #bbb you have many options. Any will work, the pattern is the real meat of this thing.
http://jsfiddle.net/tpBq4/ //Modded from #Raminson who's answer is very similar.
New suggestion, leverage event bubbling without jQuery.
var isOutSide = true
bbb = documment.getElementById('bbb');
document.body.addEventListener('click', function(){
if(!isOutSide){
bbb.style.display = 'none';
}
isOutSide = true;
});
bbb.addEventListener('click', function(){
isOutSide = false;
});
Catch the click event as it bubbles-up to the document element. When it hits the document element, hide the element. Then in a click event handler for the element, stop the propagation of the event so it doesn't reach the document element:
$(function () {
$(document).on('click', function () {
$('#bbb').hide();
});
$('#bbb').on('click', function (event) {
event.stopPropagation();
});
});
Here is a demo: http://jsfiddle.net/KVXNL/
Docs for event.stopPropagation(): http://api.jquery.com/event.stopPropagation/
I made a plugin that does this. It preserves the value for this where as these other solutions' this value will refer to document.
https://github.com/tylercrompton/clickOut
Use:
$('#bbb').clickOut(function () {
$(this).hide();
});
You can use target property of the event object, try the following:
$(document).click(function(e) {
if (e.target.id != 'bbb') {
$('#bbb').hide();
}
})
DEMO
This will work
$("#aaa").click(function(){
$('#bbb').hide();
});
$("#bbb").click(function(event){
event.stopPropagation();
})
Becouse bbb is inside the aaa the event will "bubbel up to aaa". So you have to stop the bubbling by using the event.stopPropagation when bbb is clicked
http://jsfiddle.net/GkRY2/5/
OK
* this is none jquery. you can easly modify it to work with IE
first create helper method to facilitate codding don't get confused with JQuery $()
function $g(element) {
return document.getElementById(element);
}
create our listener class
function globalClickEventListener(obj){
this.fire = function(event){
obj.onOutSideClick(event);
}
}
let's say we need to capture every click on document body
so we need to create listeners array and initialize our work. This method will be called on load
function initialize(){
// $g('body') will return reference to our document body. parameter 'body' is the id of our document body
$g('body').globalClickEventListeners = new Array();
$g('body').addGlobalClickEventListener = function (listener)
{
$g('body').globalClickEventListeners.push(listener);
}
// capture onclick event on document body and inform all listeners
$g('body').onclick = function(event) {
for(var i =0;i < $g('body').globalClickEventListeners.length; i++){
$g('body').globalClickEventListeners[i].fire(event);
}
}
}
after initialization we create event listener and pass reference of the object that needs to know every clcik on our document
function goListening(){
var icanSeeEveryClick = $g('myid');
var lsnr = new globalClickEventListener(icanSeeEveryClick);
// add our listener to listeners array
$g('body').addGlobalClickEventListener(lsnr);
// add event handling method to div
icanSeeEveryClick.onOutSideClick = function (event){
alert('Element with id : ' + event.target.id + ' has been clicked');
}
}
* Take into account the document body height and width
* Remove event listeners when you don't need them
$(document).click(function(event) {
if(!$(event.target).closest('#elementId').length) {
if($('#elementId').is(":visible")) {
$('#elementId').hide('fast');
}
}
})
Change the "#elementId" with your div.
I have a div
<div class="myDiv">
somelink
<div class="anotherDiv">somediv</div>
</div>
Now, using event delegation and the concept of bubbling I would like to intercept clicks from any of myDiv, myLink and anotherDiv.
According to best practices this could be done by listening for clicks globally (hence the term 'delegation') on the document itself
$(document).click(function(e) {
var $eventElem = $(e.target);
var bStopDefaultClickAction = false;
if ($eventElem.is('.myDiv'))
{
alert('Never alerts when clicking on myLink or anotherDiv, why????');
bStopDefaultClickAction = true;
}
return bStopDefaultClickAction;
});
See my alert question above. I was under the impression that clicks bubble. And it somewhat does because the document actually receives my click and starts delegating. But the bubbling mechanism for clicks on myLink and anotherDiv doesn't seem to work as the if-statement doesn't kick in.
Or is it like this: clicks only bubble one step, from the clicked src element to the assigned delegation object (in this case the document)? If that's the case, then I need to handle the delegation like this:
$('.myDiv').click(function(e) {
//...as before
});
But this kind of defeates the purpose of delegation as I now must have lots of 'myDiv' handlers and possibly others... it's dead easy to just have one 'document' event delegation object.
Anyone knows how this works?
You should use live event from JQuery (since 1.3), it use event delegation :
http://docs.jquery.com/Events/live
So you code will be :
$(".myDiv").live("click", function(){
alert('Alert when clicking on myLink elements. Event delegation powaa !');
});
With that, you have all the benefices of event delegation (faster, one event listener etc..), without the pain ;-)
The event target will not change. You need to mirror what jquery live does and actually check if $eventElem.closest('. myDiv') provides a match.
Try:
$(document).click(function(e) {
var $eventElem = $(e.target);
var bStopDefaultClickAction = false;
if ( $eventElem.closest('.myDiv').length )
{
alert('Never alerts when clicking on myLink or anotherDiv, why????');
bStopDefaultClickAction = true;
}
return bStopDefaultClickAction;
});
Event.target is always the element that triggered the event, so when you click on 'myLink' or 'anotherDiv' you store a reference to these objects using $(e.target); So what you do in effect is: $('.myLink').is('.myDiv') which returns false, and that's why the alert() is not executed.
If you want to use event delegation this way, you should check wheter event.target is the element or any of its children, using jQuery it could be done like this:
$(e.target).is('.myDiv, .myDiv *')
Seems to work fine to me. Try it here: http://jsbin.com/uwari
Check this out: One click handler in one page
var page = document.getElementById("contentWrapper");
page.addEventListener("click", function (e) {
var target, clickTarget, propagationFlag;
target = e.target || e.srcElement;
while (target !== page) {
clickTarget = target.getAttribute("data-clickTarget");
if (clickTarget) {
clickHandler[clickTarget](e);
propagationFlag = target.getAttribute("data-propagationFlag");
}
if (propagationFlag === "true") {
break;
}
target = target.parentNode;
}
});