i want to store for example a <table> (node of my DOM - build up with HTML5) using JS/JQuery. Why?
i like to renew the table but store the old table with the contained values in it. i think it would later be quick to replace an existing table (node) with an stored, than to build it up again and parse the old data.
(parse data > build table ; rewnew table: parse new data > store old table > replace old by new; later: replace new by old table)
if found for example that problem: Chrome sendrequest error: TypeError: Converting circular structure to JSON
(i tried also to convert my table via JSON save it in given localStorage)
is it recommend to store such a DOM-node in a variable or localstorage?
I'm glad for any advice.
You can store your dom in variables.
var myTable = $('#content');
Local Storage api is not work on older browsers if you want to store your dom tree on the client side you can use cookies but I don't recomend it.
Related
I am optimizing an api, therefore I need to use only data that is relevant for my analysis. I have created a route that pull out of the objects, but I just need 4 of them (account_manager, fronter, closer, management_fee and sales_date)
I am currently doing this:
you can use .find() with projection to retrieve only the relevant field
try this :
const model_CancellationKPI = await CancellationKPI.find({},{
account_manager:1,
fronter:1,
closer:1,
management_fee:1,
sales_date:1
}).sort({sales_date:-1})
I am trying to figure out a way to fetch only the filtered values from a table if a filter is active in Office-JS API.
Right now the only way I have figured to fetch all the table data is from the table range values property:
var table = tables.getItemAt(0);
var tableRange = table.getRange();
tableRange.load("values");
ctx.sync().then(function () {
// This returns all the values from the table, and not only the visible data
var values = tableRange.values;
});
Any ideas on how I can proceed to fetch only the visible values from the table if a filter is active?
From previous experience with Office Interop I have achieved the same by looping through the different Areas of the table range, but I am unable to find the equivalent to Areas in Office-JS.
The upcoming next wave of features as part of Excel JS APIs 1.3 will include a new object "RangeView" that allows you to read only the visible values off the Range object.
Here's a link to the open spec on GitHub - https://github.com/OfficeDev/office-js-docs/tree/ExcelJs_1.3_OpenSpec/excel.
Note that this isn't available just yet, but will be in the near future.
Usage for your case off a table would look like this:
var table = tables.getItemAt(0);
var visibleView = table.getRange().getVisibleView();
ctx.load(visibleView);
ctx.sync().then(function () {
var values = visibleView.values;
});
One way to get only filtered data is through the Binding.getDataAsync method, which takes a filterType parameter.
Office.select("bindings#myTableBinding1").getDataAsync({
coercionType: "table",
filterType: "onlyVisible"
},function(asyncResult){
var values = (asyncResult.value.rows);
});
This code assumes you have already created a binding to the table. If not, you can run the following code first, which uses the table name to call Bindings.addFromNamedItemAsync:
Office.context.document.bindings.addFromNamedItemAsync("Table1","table",{
id: "myTableBinding1"
},function(asyncResult){
// handle errors and call code sample #1
});
Note that the solution above is supported as far back as Excel 2013 because it uses the shared APIs. The Excel-specific API set doesn't yet have the capability to return only unfiltered data.
-Michael Saunders, PM for Office add-ins
I've been developing a diagramming tool, I used JSPlumb.
I made shapes using css and connections are made through JSplumb.
I need to save the diagram as json or xml format. But I am having a hard time.
For example, this is the function for saving the diagram
$(function save() {
//$("#editor").resizable("destroy");
Objs = [];
$('#editor').each(function(){
Objs.push({id:$(this).attr('id'), html:$(this).html(), left:$(this).css('left'), top:$(this).css('top'), width:$(this).css('width'), height:$(this).css('height')});
});
console.log(Objs);
});
Also, I've been trying the stringify for getting the data and parse for loading but I still can't figure it out.
Is there a way that I can save jsplumb to json or xml?
Whenever a connection is established, "connection" event is triggered. You need to store the connection endpoints details in that triggered function so that you can retrieve them later.
First make sure that you have set proper id for your endpoints. You can manually set at time of endpoint creation as:
var e0 = jsPlumb.addEndpoint("div1",{uuid:"div1_ep1"}), // You can also set uuid based on element it is placed on
e1 = jsPlumb.addEndpoint("div2",{uuid:"div2_ep1"});
Now bind the connection event where you will store the established connections info:
var uuid, index=0; // Array to store the endpoint sets.
jsPlumb.bind("connection", function(ci) {
var eps = ci.connection.endpoints;
console.log(eps[0].getUuid() +"->"+ eps[1].getUuid()); // store this information in 2d-Array or any other format you wish
uuid[index][0]=eps[0].getUuid(); // source endpoint id
uuid[index++][1]=eps[1].getUuid(); // target endpoint id
}
});
You can convert the array information to JSON format and store it. On restoring, connect the endpoints based on uuid. code:
jsPlumb.connect({ uuids:["div1_ep1","div2_ep1"] });
Here is the jsFiddle for making connections based on endpoints.
NOTE: The above code is only for restoring the connection and endpoints information after you have restored the div's css. You can store the css properties of all div's by using the same method which you wrote in your question.
I just recently tied this and its working
function createJSON(){
var data = new Object();
$("input[class = process]").each(function(){
data[$(this).attr("name")] = $(this).val();
jsonString = JSON.stringify(data);
});
console.log(jsonString);
}
I'm having massive problems with databinding to a ListView in a Windows 8 app using Javascript.
Inside the "activated" event on default.js I have written some code to get some data from a web service and push it into an array. This bit works OK and the array is populated.
The problem I have is that the app won't recognise the data. I have this code in a page called inspections.html:
data-win-options="{itemTemplate: select('#imageTextListCollectionTemplate'),
itemDataSource: dataList.dataSource,
layout: {type: WinJS.UI.ListLayout}}
and then in the "activated" event I declare:
var dataList = new Array();
and push the data from the web service into this array. But at runtime I get an error that says something along the lines of "can't find dataSource on undefined dataList".
I've done some of the examples on the MS website and in one of them it creates a dummy dataset and references it from a namespace. I kinda think that what I'm missing here is a namespace too but I don't know what the namespace for default.js is. Or maybe I'm wrong and it's something totally different.
Please help - this is so fundamental (and should be easy) but I can't get my head around it.
Do you want to create datalist in HTML or javascript?
It seems you want to create it from JavaScript. Assuming that you have already pushed your data into array from your webservice, you only need to call:
var dataList = new WinJS.Binding.List(array);
now accessing dataList.dataSource is perfectly valid.
Also, to create the datalist you don't always need an array. You could probably start with an empty list and then keep inserting data directly into the data list from web services, like:
var dataList = new WinJS.Binding.List([]);
dataList.push(value1);
dataList.push(value2);
...
Hope it helps. Let me know if you have any more questions.
If you are getting troubled by assigning datasource in HTML side
Prefer js side like
var list = new WinJS.Binding.List(array here);
listView.itemDataSource = list.dataSource;
by using this you can easily go through the data which you are binding to ListView.
I'm writing a custom REST adapter for ember-data users with a django rest framework app and need to build a JSON string to do POST/PUT. The only problem is I can't seem to chain another jQuery method after the $.toJSON that removes this.
So far I have an ember.js object that I plan to extract each property from, except my django app doesn't want the id to go along with the HTTP POST
I can get a legit string like so
$.param(record.toJSON());
This results in the following
id=0&username=dat
I'd like a quick way to exclude id when I do this toJSON (does this exist w/ out writing it by hand?) Using jQuery 1.8+
Thank you in advance
Turns out this was really simple
var json_data = record.toJSON();
delete json_data.id;
var data = $.param(json_data);
Now instead of
id=0&username=dat
I now get
username=dat