I am trying to use the following code to reference anything focused inside my contenteditable div, which has an id of rt:
var lastfocused;
$("#rt *").focus(function () {
lastfocused = $(this);
});
For some reason, lastfocused always equals $("#rt");, but never anything else which may be inside the contenteditable div. How do I make it so that anything focused inside the contenteditable div will be stored in the lastfocused variable?
Looks like your problem is elsewhere. The above code perfectly works for me:
http://jsfiddle.net/8hZWq/
EDIT
If the children elements aren't inputs as you said, but divs - the focus() method is not applicable to them, as it works only for input, textareas, select etc.
You can also use .click() instead of focus() to store the reference to the last clicked element. Bear in mind though, it also depends to the structure of your elements.
For example if you have multiple levels of containers within children divs, the #ID * selector will actually trigger multiple times each level of children starting from the #ID.
If you like to store reference to only the first level of children of the #ID, you should use #ID > * selector to refer only direct children.
If you like to store the reference to only the very element that was clicked upon regardless of it's level in relation to the container, you should use click event target reference instead:
var clicked;
$('#ID').click(function(event){
clicked = $(event.target);
});
Indeed your problem is because of variable declaration out of the function. Setting it in, in each focus event the 'lastfocused' variable will be re-assigned.
I came later, but if i arrive here someone else can.
Do this:
$("#rt *").focus(function () {
var lastfocused = $(this);
});
Related
The following function can focus on an element with an id declaration:
function setFocus() {
document.getElementById("focus").focus();
}
But how can one focus on an element with a classname declaration. Use case would be previously in the code where the element we want to focus on is already stored from the dom (i.e., const element = document.querySelectorAll('.a-class-name')[0]) type of scenario?
Does the element have a tab index? You cannot focus a non input element unless it has a tab index. Use tabindex="-1" for elements like divs and spans. Then call the .focus() method on the element. -1 will allow you to focus with the focus method but wont get focus when move the focus around with the keyboard and pressing tab.
document.getElementById('btn').addEventListener('click', function() {
document.querySelectorAll('.focus_me')[0].focus();
});
<span class="focus_me" tabindex="-1">Focus me</span><br>
<button id="btn">Click to focus</button>
element.scrollIntoView(true) will do what you are needing.
document.getElementsByClassName('className') would always return multiple elements because conceptually Classes are meant to be applied to multiple elements. If you want only the first element in the DOM with that class, you can select the first element out of the array returned, as you did.
var elements = document.getElementsByClassName('className');
var requiredElement = elements[0];
OR
var requiredElement = document.querySelector('.className');
Then as #j08691 mentioned in the comments use
function setFocus() {
requiredElement.focus();
}
If the one with getElementById works, then there is no reason for this to not.
Happy coding. :)
I have a list of buttons that is created by the DOM which references an array. When a button in the list is clicked, I want to retrieve the String that is displayed on the Button.
I have tried the following code to reference the string value, but get undefined:
this.String; inside the function when the button is clicked to retreive the string.
How can I properly retrieve the string.
The click handling function is:
$('.timeButtons').click(function() {
confirmation.push(this.textContent);
})
This is how the list of buttons is created:
var populateList=function(array){
var list = document.createElement('ul');
list.className="delete";
for(var i = 0; i < array.length;- i++) {
var item = document.createElement('li');
var itemButton=document.createElement('button');
itemButton.style.cssText='background:#f85a5a; border:none; width:200px; height:50px; margin-bottom:50px; align:center; border-radius:25px; color:#ffffff;'
itemButton.appendChild(document.createTextNode(array[i]));
item.appendChild(itemButton);
list.appendChild(item);
}
return list;
}
Assuming that this is a reference to the button element in question, you can use this.textContent to get the button's text. (Or .innerHTML.)
Demo: http://jsfiddle.net/w0ntsrLx/
Or since in your edited question you seem to be using jQuery, use the .text() method. In a comment you say that the containing div has the "timeButtons" class, so bind a delegated handler to that div as follows:
$(".timeButtons").on("click", "button", function(e) {
confirmation.push($(this).text());
});
Demo: http://jsfiddle.net/w0ntsrLx/1/
That way the function will only be called if the click is on a button element within the .timeButtons div, and this will be the clicked button. The click handler that you show in your question with $(".timeButtons").click(...) is bound to the div and doesn't in any way test for the buttons, so within the handler this will be the div, not the clicked button.
Check this out
Assuming you want pure javascript code,
Whenever an event is triggered, an object is passed back in callback (generally being named as 'event'). this object has many properties including source element, position of click and many more.
get the element using event.srcElement
You can use element.innerHTML or element.innerText to find out the content of the Button.
There is a difference between using innerText and innerHTML, but in your case, both can be used.
Also, you can use jquery too to easily append child, create elements and binding events.
This question is connected with that
This code hides div when user type data to inputs and focus on another div
$(".Q,.A").blur(function(e) {
if ($(this).val().length > 0 && $(this).siblings("input").val().length > 0) {
$(this).parent().fadeOut(1000);
getData("ajaxPHP/insertNewWords.php?q='" + $(this).siblings('input').val() + "'&a='" + $(this).val() + "'&zestawID="+zestawID, "console");
$(".main").append("<div><input type='text' class='Q'></input><input type='text' class='A'></input></div><br>");
}
});
And when user enter data, this div hides and script creates new div (so user can enter infinite amount of data).
The problem is: new created divs don't hide.
So what should I do, if I want to involve new created divs into "$(".Q,.A")"?
The problem is (as I understand it), that you have a behaviour attached to a set of nodes on your page, and new nodes added to the page do not pick up this behaviour.
This is because of the way JQuery works. When you define a selector like $(".Q,.A") this selector evaluates to a set of known nodes on your page. The code that follows only applies to those found elements. This selector is never evaluated again, so any new nodes never get a chance to gain your desired behaviour.
The solution is to get JQuery to re-evaluate the selector every time the event occurs. So you need to listen for the event globally, then filter to only handle the elements that match your selector.
The correct way to do this is on
$(document).on("blur", ".Q,.A", function(){ ... });
See: http://jsfiddle.net/sAT6L/
Live has some discussion on how it used to be done in each version of JQuery.
Note: You should be able to restrict the scope to something more local than $(document).
You can use jquery's .on method on the parent container, because events "bubble" to the parent container. The on function also allows you to specify a selector to filter the children elements, which gets applied dynamically, so you can use your ".Q,.A" selector there:
$(document).ready(function(){
$("#container").on("blur", ".Q,.A", function(e){
if($(this).val().length>0 && $(this).siblings("input").val().length>0){
$(this).parent().fadeOut(1000);
$("#container").append('<div><input type="text" class="Q"><input type="text" class="A"></div>');
}
});
});
Fiddle: http://jsfiddle.net/rK3HS/1/
Here's how I append the value:
$('<div>someText</div>').appendTo(self);
And here's how I want to remove it:
$(self).remove('<div>someText</div>');
The appending works, the removing doesnt. What am I doing wrong?
The .remove() function takes a selector to filter the already matched elements, not to match elements inside of them. What you want is something like this:
$(self).find('div:contains(someText)').remove();
That will find a <div> element containing the text someText inside of whatever element self is, then removes it.
The API http://api.jquery.com/remove/ sais that a selector is required.
Try $(self).remove('> div');
This will remove the first childs of div.
You can use $(self).filter('div:contains("someText")').remove(); to remove a div with a specific content or $(self).find('> div').remove(); to remove the first childs of div.
EDIT: removed first version I posted without testing.
It most likely has to do with the scope of self. Since you've named it self I am assuming that you are getting this variable using $(this) on the click event. If that's the case, and you want to call the remove method, you can only do so from within the same function. Otherwise you need to either store the element in a variable or provide another selector to access it.
Example:
<div class="div1"></div>
this will be the div with the click event
$(document).ready(function(){
var self = null;
$('.div1').click(function(e){
self = $(this);
var itemToAdd = '<div>SomeText</div>';
$(itemToAdd).appendTo(self);
});
// to remove it
// this will remove the text immediately after it's placed
// this call needs to be wrapped in a function called on another event
$('.div1').find('div:contains(someText)').remove();
});
<div onclick="test(this)">
Test
<div id="child">child</div>
</div>
I want to change the style of the child div when the parent div is clicked. How do I reference it? I would like to be able to reference it by ID as the the html in the parent div could change and the child won't be the first child etc.
function test(el){
el.childNode["child"].style.display = "none";
}
Something like that, where I can reference the child node by id and set the style of it.
Thanks.
EDIT: Point taken with IDs needing to be unique. So let me revise my question a little. I would hate to have to create unique IDs for every element that gets added to the page. The parent div is added dynamically. (sort of like a page notes system). And then there is this child div. I would like to be able to do something like this: el.getElementsByName("options").item(0).style.display = "block";
If I replace el with document, it works fine, but it doesn't to every "options" child div on the page. Whereas, I want to be able to click the parent div, and have the child div do something (like go away for example).
If I have to dynamically create a million (exaggerated) div IDs, I will, but I would rather not. Any ideas?
In modern browsers (IE8, Firefox, Chrome, Opera, Safari) you can use querySelector():
function test(el){
el.querySelector("#child").style.display = "none";
}
For older browsers (<=IE7), you would have to use some sort of library, such as Sizzle or a framework, such as jQuery, to work with selectors.
As mentioned, IDs are supposed to be unique within a document, so it's easiest to just use document.getElementById("child").
This works well:
function test(el){
el.childNodes.item("child").style.display = "none";
}
If the argument of item() function is an integer, the function will treat it as an index. If the argument is a string, then the function searches for name or ID of element.
If the child is always going to be a specific tag then you could do it like this
function test(el)
{
var children = el.getElementsByTagName('div');// any tag could be used here..
for(var i = 0; i< children.length;i++)
{
if (children[i].getAttribute('id') == 'child') // any attribute could be used here
{
// do what ever you want with the element..
// children[i] holds the element at the moment..
}
}
}
document.getElementById('child') should return you the correct element - remember that id's need to be unique across a document to make it valid anyway.
edit : see this page - ids MUST be unique.
edit edit : alternate way to solve the problem :
<div onclick="test('child1')">
Test
<div id="child1">child</div>
</div>
then you just need the test() function to look up the element by id that you passed in.
If you want to find specific child DOM element use method querySelectorAll
var $form = document.getElementById("contactFrm");
in $form variable we can search which child element we want :)
For more details about how to use querySelectorAll check this page