How do I block special characters from being typed into an input field with jquery?
A simple example using a regular expression which you could change to allow/disallow whatever you like.
$('input').on('keypress', function (event) {
var regex = new RegExp("^[a-zA-Z0-9]+$");
var key = String.fromCharCode(!event.charCode ? event.which : event.charCode);
if (!regex.test(key)) {
event.preventDefault();
return false;
}
});
I was looking for an answer that restricted input to only alphanumeric characters, but still allowed for the use of control characters (e.g., backspace, delete, tab) and copy+paste. None of the provided answers that I tried satisfied all of these requirements, so I came up with the following using the input event.
$('input').on('input', function() {
$(this).val($(this).val().replace(/[^a-z0-9]/gi, ''));
});
Edit:
As rinogo pointed out in the comments, the above code snippet forces the cursor to the end of the input when typing in the middle of the input text. I believe the code snippet below solves this problem.
$('input').on('input', function() {
var c = this.selectionStart,
r = /[^a-z0-9]/gi,
v = $(this).val();
if(r.test(v)) {
$(this).val(v.replace(r, ''));
c--;
}
this.setSelectionRange(c, c);
});
Short answer: prevent the 'keypress' event:
$("input").keypress(function(e){
var charCode = !e.charCode ? e.which : e.charCode;
if(/* Test for special character */ )
e.preventDefault();
})
Long answer: Use a plugin like jquery.alphanum
There are several things to consider when picking a solution:
Pasted text
Control characters like backspace or F5 may be prevented by the above code.
é, í, ä etc
Arabic or Chinese...
Cross Browser compatibility
I think this area is complex enough to warrant using a 3rd party plugin. I tried out several of the available plugins but found some problems with each of them so I went ahead and wrote jquery.alphanum. The code looks like this:
$("input").alphanum();
Or for more fine-grained control, add some settings:
$("#username").alphanum({
allow : "€$£",
disallow : "xyz",
allowUpper : false
});
Hope it helps.
Use simple onkeypress event inline.
<input type="text" name="count" onkeypress="return /[0-9a-zA-Z]/i.test(event.key)">
Use HTML5's pattern input attribute!
<input type="text" pattern="^[a-zA-Z0-9]+$" />
Use regex to allow/disallow anything. Also, for a slightly more robust version than the accepted answer, allowing characters that don't have a key value associated with them (backspace, tab, arrow keys, delete, etc.) can be done by first passing through the keypress event and check the key based on keycode instead of value.
$('#input').bind('keydown', function (event) {
switch (event.keyCode) {
case 8: // Backspace
case 9: // Tab
case 13: // Enter
case 37: // Left
case 38: // Up
case 39: // Right
case 40: // Down
break;
default:
var regex = new RegExp("^[a-zA-Z0-9.,/ $#()]+$");
var key = event.key;
if (!regex.test(key)) {
event.preventDefault();
return false;
}
break;
}
});
Your textbox:
<input type="text" id="name">
Your javascript:
$("#name").keypress(function(event) {
var character = String.fromCharCode(event.keyCode);
return isValid(character);
});
function isValid(str) {
return !/[~`!##$%\^&*()+=\-\[\]\\';,/{}|\\":<>\?]/g.test(str);
}
Take a look at the jQuery alphanumeric plugin. https://github.com/KevinSheedy/jquery.alphanum
//All of these are from their demo page
//only numbers and alpha characters
$('.sample1').alphanumeric();
//only numeric
$('.sample4').numeric();
//only numeric and the .
$('.sample5').numeric({allow:"."});
//all alphanumeric except the . 1 and a
$('.sample6').alphanumeric({ichars:'.1a'});
this is an example that prevent the user from typing the character "a"
$(function() {
$('input:text').keydown(function(e) {
if(e.keyCode==65)
return false;
});
});
key codes refrence here:
http://www.expandinghead.net/keycode.html
I use this code modifying others that I saw. Only grand to the user write if the key pressed or pasted text pass the pattern test (match) (this example is a text input that only allows 8 digits)
$("input").on("keypress paste", function(e){
var c = this.selectionStart, v = $(this).val();
if (e.type == "keypress")
var key = String.fromCharCode(!e.charCode ? e.which : e.charCode)
else
var key = e.originalEvent.clipboardData.getData('Text')
var val = v.substr(0, c) + key + v.substr(c, v.length)
if (!val.match(/\d{0,8}/) || val.match(/\d{0,8}/).toString() != val) {
e.preventDefault()
return false
}
})
$(function(){
$('input').keyup(function(){
var input_val = $(this).val();
var inputRGEX = /^[a-zA-Z0-9]*$/;
var inputResult = inputRGEX.test(input_val);
if(!(inputResult))
{
this.value = this.value.replace(/[^a-z0-9\s]/gi, '');
}
});
});
Write some javascript code on onkeypress event of textbox.
as per requirement allow and restrict character in your textbox
function isNumberKeyWithStar(evt) {
var charCode = (evt.which) ? evt.which : event.keyCode
if (charCode > 31 && (charCode < 48 || charCode > 57) && charCode != 42)
return false;
return true;
}
function isNumberKey(evt) {
var charCode = (evt.which) ? evt.which : event.keyCode
if (charCode > 31 && (charCode < 48 || charCode > 57))
return false;
return true;
}
function isNumberKeyForAmount(evt) {
var charCode = (evt.which) ? evt.which : event.keyCode
if (charCode > 31 && (charCode < 48 || charCode > 57) && charCode != 46)
return false;
return true;
}
To replace special characters, space and convert to lower case
$(document).ready(function (){
$(document).on("keyup", "#Id", function () {
$("#Id").val($("#Id").val().replace(/[^a-z0-9\s]/gi, '').replace(/[_\s]/g, '').toLowerCase());
});
});
Yes you can do by using jQuery as:
<script>
$(document).ready(function()
{
$("#username").blur(function()
{
//remove all the class add the messagebox classes and start fading
$("#msgbox").removeClass().addClass('messagebox').text('Checking...').fadeIn("slow");
//check the username exists or not from ajax
$.post("user_availability.php",{ user_name:$(this).val() } ,function(data)
{
if(data=='empty') // if username is empty
{
$("#msgbox").fadeTo(200,0.1,function() //start fading the messagebox
{
//add message and change the class of the box and start fading
$(this).html('Empty user id is not allowed').addClass('messageboxerror').fadeTo(900,1);
});
}
else if(data=='invalid') // if special characters used in username
{
$("#msgbox").fadeTo(200,0.1,function() //start fading the messagebox
{
//add message and change the class of the box and start fading
$(this).html('Sorry, only letters (a-z), numbers (0-9), and periods (.) are allowed.').addClass('messageboxerror').fadeTo(900,1);
});
}
else if(data=='no') // if username not avaiable
{
$("#msgbox").fadeTo(200,0.1,function() //start fading the messagebox
{
//add message and change the class of the box and start fading
$(this).html('User id already exists').addClass('messageboxerror').fadeTo(900,1);
});
}
else
{
$("#msgbox").fadeTo(200,0.1,function() //start fading the messagebox
{
//add message and change the class of the box and start fading
$(this).html('User id available to register').addClass('messageboxok').fadeTo(900,1);
});
}
});
});
});
</script>
<input type="text" id="username" name="username"/><span id="msgbox" style="display:none"></span>
and script for your user_availability.php will be:
<?php
include'includes/config.php';
//value got from the get method
$user_name = trim($_POST['user_name']);
if($user_name == ''){
echo "empty";
}elseif(preg_match('/[\'^£$%&*()}{##~?><>,|=_+¬-]/', $user_name)){
echo "invalid";
}else{
$select = mysql_query("SELECT user_id FROM staff");
$i=0;
//this varible contains the array of existing users
while($fetch = mysql_fetch_array($select)){
$existing_users[$i] = $fetch['user_id'];
$i++;
}
//checking weather user exists or not in $existing_users array
if (in_array($user_name, $existing_users))
{
//user name is not availble
echo "no";
}
else
{
//user name is available
echo "yes";
}
}
?>
I tried to add for / and \ but not succeeded.
You can also do it by using javascript & code will be:
<!-- Check special characters in username start -->
<script language="javascript" type="text/javascript">
function check(e) {
var keynum
var keychar
var numcheck
// For Internet Explorer
if (window.event) {
keynum = e.keyCode;
}
// For Netscape/Firefox/Opera
else if (e.which) {
keynum = e.which;
}
keychar = String.fromCharCode(keynum);
//List of special characters you want to restrict
if (keychar == "'" || keychar == "`" || keychar =="!" || keychar =="#" || keychar =="#" || keychar =="$" || keychar =="%" || keychar =="^" || keychar =="&" || keychar =="*" || keychar =="(" || keychar ==")" || keychar =="-" || keychar =="_" || keychar =="+" || keychar =="=" || keychar =="/" || keychar =="~" || keychar =="<" || keychar ==">" || keychar =="," || keychar ==";" || keychar ==":" || keychar =="|" || keychar =="?" || keychar =="{" || keychar =="}" || keychar =="[" || keychar =="]" || keychar =="¬" || keychar =="£" || keychar =='"' || keychar =="\\") {
return false;
} else {
return true;
}
}
</script>
<!-- Check special characters in username end -->
<!-- in your form -->
User id : <input type="text" id="txtname" name="txtname" onkeypress="return check(event)"/>
just the numbers:
$('input.time').keydown(function(e) { if(e.keyCode>=48 &&
e.keyCode<=57) {
return true; } else {
return false; } });
or for time including ":"
$('input.time').keydown(function(e) { if(e.keyCode>=48 &&
e.keyCode<=58) {
return true; } else {
return false; } });
also including delete and backspace:
$('input.time').keydown(function(e) { if((e.keyCode>=46 &&
e.keyCode<=58) || e.keyCode==8) { return true; } else {
return false; } });
unfortuneatly not getting it to work on a iMAC
Wanted to comment on Alex's comment to Dale's answer. Not possible (first need how much "rep"? That wont happen very soon.. strange system.)
So as an answer:
Backspace can be added by adding \b to the regex definition like this: [a-zA-Z0-9\b].
Or you simply allow the whole Latin range, including more or less anything "non exotic" characters (also control chars like backspace): ^[\u0000-\u024F\u20AC]+$
Only real unicode char outside latin there is the euro sign (20ac), add whatever you may need else.
To also handle input entered via copy&paste, simply also bind to the "change" event and check the input there too - deleting it or striping it / giving an error message like "not supported characters"..
if (!regex.test($j(this).val())) {
alert('your input contained not supported characters');
$j(this).val('');
return false;
}
Restrict specials characters on keypress. Here's a test page for key codes: http://www.asquare.net/javascript/tests/KeyCode.html
var specialChars = [62,33,36,64,35,37,94,38,42,40,41];
some_element.bind("keypress", function(event) {
// prevent if in array
if($.inArray(event.which,specialChars) != -1) {
event.preventDefault();
}
});
In Angular, I needed a proper currency format in my textfield. My solution:
var angularApp = angular.module('Application', []);
...
// new angular directive
angularApp.directive('onlyNum', function() {
return function( scope, element, attrs) {
var specialChars = [62,33,36,64,35,37,94,38,42,40,41];
// prevent these special characters
element.bind("keypress", function(event) {
if($.inArray(event.which,specialChars) != -1) {
prevent( scope, event, attrs)
}
});
var allowableKeys = [8,9,37,39,46,48,49,50,51,52,53,54,55,56
,57,96,97,98,99,100,101,102,103,104,105,110,190];
element.bind("keydown", function(event) {
if($.inArray(event.which,allowableKeys) == -1) {
prevent( scope, event, attrs)
}
});
};
})
// scope.$apply makes angular aware of your changes
function prevent( scope, event, attrs) {
scope.$apply(function(){
scope.$eval(attrs.onlyNum);
event.preventDefault();
});
event.preventDefault();
}
In the html add the directive
<input only-num type="text" maxlength="10" id="amount" placeholder="$XXXX.XX"
autocomplete="off" ng-model="vm.amount" ng-change="vm.updateRequest()">
and in the corresponding angular controller I only allow there to be only 1 period, convert text to number and add number rounding on 'blur'
...
this.updateRequest = function() {
amount = $scope.amount;
if (amount != undefined) {
document.getElementById('spcf').onkeypress = function (e) {
// only allow one period in currency
if (e.keyCode === 46 && this.value.split('.').length === 2) {
return false;
}
}
// Remove "." When Last Character and round the number on blur
$("#amount").on("blur", function() {
if (this.value.charAt(this.value.length-1) == ".") {
this.value.replace(".","");
$("#amount").val(this.value);
}
var num = parseFloat(this.value);
// check for 'NaN' if its safe continue
if (!isNaN(num)) {
var num = (Math.round(parseFloat(this.value) * 100) / 100).toFixed(2);
$("#amount").val(num);
}
});
this.data.amountRequested = Math.round(parseFloat(amount) * 100) / 100;
}
...
You don't need jQuery for this action
You can achieve this using plain JavaScript, You can put this in the onKeyUp event.
Restrict - Special Characters
e.target.value = e.target.value.replace(/[^\w]|_/g, '').toLowerCase()
Accept - Number only
e.target.value = e.target.value.replace(/[^0-9]/g, '').toLowerCase()
Accept - Small Alphabet only
e.target.value = e.target.value.replace(/[^0-9]/g, '').toLowerCase()
I could write for some more scenarios but I have to maintain the specific answer.
Note It will work with jquery, react, angular, and so on.
$(this).val($(this).val().replace(/[^0-9\.]/g,''));
if( $(this).val().indexOf('.') == 0){
$(this).val("");
}
//this is the simplest way
indexof is used to validate if the input started with "."
[User below code to restrict special character also
$(h.txtAmount).keydown(function (event) {
if (event.shiftKey) {
event.preventDefault();
}
if (event.keyCode == 46 || event.keyCode == 8) {
}
else {
if (event.keyCode < 95) {
if (event.keyCode < 48 || event.keyCode > 57) {
event.preventDefault();
}
}
else {
if (event.keyCode < 96 || event.keyCode > 105) {
event.preventDefault();
}
}
}
});]
Allow only numbers in TextBox (Restrict Alphabets and Special Characters)
/*code: 48-57 Numbers
8 - Backspace,
35 - home key, 36 - End key
37-40: Arrow keys, 46 - Delete key*/
function restrictAlphabets(e){
var x=e.which||e.keycode;
if((x>=48 && x<=57) || x==8 ||
(x>=35 && x<=40)|| x==46)
return true;
else
return false;
}
/**
* Forbids special characters and decimals
* Allows numbers only
* */
const numbersOnly = (evt) => {
let charCode = (evt.which) ? evt.which : evt.keyCode;
if (charCode === 46 && charCode > 31 && (charCode < 48 || charCode > 57)) {
return false;
}
let inputResult = /^[0-9]*$/.test(evt.target.value);
if (!inputResult) {
evt.target.value = evt.target.value.replace(/[^a-z0-9\s]/gi, '');
}
return true;
}
In HTML:
<input type="text" (keypress)="omitSpecialChar($event)"/>
In JS:
omitSpecialChar(event) {
const keyPressed = String.fromCharCode(event.keyCode);
const verifyKeyPressed = /^[a-zA-Z\' \u00C0-\u00FF]*$/.test(keyPressed);
return verifyKeyPressed === true;
}
In this example it is possible to type accents.
$(document).ready(function() {
$('#Description').bind('input', function() {
var c = this.selectionStart,
r = /[^a-z0-9 .]/gi,
v = $(this).val();
if (r.test(v)) {
$(this).val(v.replace(r, ''));
c--;
}
this.setSelectionRange(c, c);
if (!(checkEmpty($("#Description").val()))) {
$("#Description").val("");
} //1Apr2022 code end
});
$('#Description').on('change', function() {
if (!(checkEmpty($("#Description").val()))) {
$("#Description").val("");
} //1Apr2022 code end
});
});
function checkEmpty(field) { //1Apr2022 new code
if (field == "" ||
field == null ||
field == "undefinied") {
return false;
} else if (/^\s*$/.test(field)) {
return false;
} else {
return true;
}
}
A more enhanced form would be
$('input[type=text]').on('input', function() {
var c = this.selectionStart,
r = /[^a-z ]/gi,
v = $(this).val();
if(r.test(v)) {
$(this).val(v.replace(r, ''));
c--;
}
this.setSelectionRange(c, c);
});
Because it will allow you to enter space as well and it will only target the input fields with type text and wont bother the other input fields like email, password etc as normally we need special characters in email and password field
I'm looking for a KeyListener for a game I'm developing in JavaScript. I have no idea how this would work in real code but it would be something like this:
if(keyPress == upKey)
{
playerSpriteX += 10;
}
else if(keyPress == downKey)
{
playerSpriteY -= 10;
}
etc...
I searched it up, and Google came up with things that involved AJAX which I don't understand yet. Is there a built in function in JavaScript that does this?
Here's an update for modern browsers in 2019
let playerSpriteX = 0;
document.addEventListener('keyup', (e) => {
if (e.code === "ArrowUp") playerSpriteX += 10
else if (e.code === "ArrowDown") playerSpriteX -= 10
document.getElementById('test').innerHTML = 'playerSpriteX = ' + playerSpriteX;
});
Click on this window to focus it, and hit keys up and down
<br><br><br>
<div id="test">playerSpriteX = 0</div>
Original answer from 2013
window.onkeyup = function(e) {
var key = e.keyCode ? e.keyCode : e.which;
if (key == 38) {
playerSpriteX += 10;
}else if (key == 40) {
playerSpriteX -= 10;
}
}
FIDDLE
The code is
document.addEventListener('keydown', function(event){
alert(event.keyCode);
} );
This return the ascii code of the key. If you need the key representation, use event.key (This will return 'a', 'o', 'Alt'...)
JSFIDDLE DEMO
If you don't want the event to be continuous (if you want the user to have to release the key each time), change onkeydown to onkeyup
window.onkeydown = function (e) {
var code = e.keyCode ? e.keyCode : e.which;
if (code === 38) { //up key
alert('up');
} else if (code === 40) { //down key
alert('down');
}
};
Did you check the small Mousetrap library?
Mousetrap is a simple library for handling keyboard shortcuts in JavaScript.
A bit more readable comparing is done by casting event.key to upper case (I used onkeyup - needed the event to fire once upon each key tap):
window.onkeyup = function(event) {
let key = event.key.toUpperCase();
if ( key == 'W' ) {
// 'W' key is pressed
} else if ( key == 'D' ) {
// 'D' key is pressed
}
}
Each key has it's own code, get it out by outputting value of "key" variable (eg for arrow up key it will be 'ARROWUP' - (casted to uppercase))
I use the following script to validate the text box to enter only numbers and (.) which means it is decimal textbox validation. It was work fine in Internet Explorer and Google Chrome. If I execute the function in FireFox I get the following Error:
Event Is not Defined.
How to solve this?
function abc(event) {
if (event.keyCode > 47 && event.keyCode < 58) {
return true;
}
if (event.keyCode == 8 || event.keyCode == 46)
{
return true;
}
return false;
}
I call this function like this:
$('.decimalValidate').live('keypress',function(){
var decimalid=$(this).attr("id");
var decimalval=$('#'+decimalid).val();
var decimalvalidate=abc(decimalval);
if(decimalvalidate == false)
return false;
});
I assign this validation for text box like this:
input type="text" id="Total" class="abc"
Try this
function abc(event) {
if(!event)
event= window.event;
if (event.keyCode > 47 && event.keyCode < 58) {
return true;
}
if (event.keyCode == 8 || event.keyCode == 46)
{
return true;
}
return false;
}
and
$('.decimalValidate').live('keypress',function(e){
var decimalid=$(this).attr("id");
var decimalval=$('#'+decimalid).val();
var decimalvalidate=abc(evt); //keypress event
if(decimalvalidate == false)
return false;
});
decimalval is not an Event object, and you have to pass it to the abc function in ordert to find out which key you pressed:
$('.decimalValidate').live('keypress',function(ev){
var decimalid=$(this).attr("id");
var decimalval=$('#'+decimalid).val();
var decimalvalidate=abc(ev);
if(decimalvalidate == false)
return false;
});
$('.decimalValidate').live('keypress',function(e){
var decimalvalidate=abc(e); //this will point to the event of the keypress.
if(decimalvalidate == false)
return false;
});
I am not sure why you did all of the decimalid and decimalval operations, but if you want the event, do as I wrote in the edited code above.
Good luck.
$('.decimalValidate').on('keypress',function(event){
var decimalid = $(this).attr("id");
var decimalval = $('#'+decimalid).val();
var decimalvalidate = abc(event);
if(decimalvalidate == false)
return false;
});
function abc(event) {
if (event.keyCode > 47 && event.keyCode < 58) {
return true;
}
if (event.keyCode == 8 || event.keyCode == 46)
{
return true;
}
return false;
}
It helps you..