Develop Reference

Collatz Sequence for all numbers from 1 to 10 stored in individual arrays

I want to produce Collatz Sequence for all numbers from 1 to 10 and all the produced sequences are stored in an array named innerArr that should change at every looping. And all those changed arrays are to be stored in outerArr (i.e. array of arrays). But:
1. Given for loop not incrementing (or decrementing) when there exists a while loop inside this for loop.
2. Given while loop is working only when there is no for loop covering it and n = (any number).
let n,outerArr = [];
for (n = 1; n < 10; n++) {
let innerArr = [], i = 0;
innerArr.push(n);
while (n !== 1) {
if (n % 2 == 0) {
n = n / 2;
innerArr.push(n);
} else {
n = (3 * n) + 1;
innerArr.push(n);
}
i++;
}
outerArr.push(innerArr);
}
console.log(outerArr)

The problem is, that your for loop, that tries to count n from 1 to 9, will never run through the end, because n is always reset to 1 in the while loop. Therefore you must separate the variables that count from 1 to 9, and the variable that is modified in the while loop.
Moreover, if you really want to cover the numbers from 1 to 10 as you say in your question, remember to use <= 10.
let n,outerArr = [];
for (m = 1; m <= 10; m++) {
let n = m;
let innerArr = [], i = 0;
innerArr.push(n);
while (n !== 1) {
if (n % 2 == 0) {
n = n / 2;
innerArr.push(n);
} else {
n = (3 * n) + 1;
innerArr.push(n);
}
i++;
}
outerArr.push(innerArr);
}
console.log(outerArr)

How to convert this O(n^2) algorithm to O(n)?

https://www.codewars.com/kata/is-my-friend-cheating/train/javascript
My goal is to devise a function that finds number pairs (a, b) which satisfy the equation a * b == sum(1, 2, 3 ..., n-2, n-1, n) - a - b.
The following code finds all the pairs, but is too slow and times out. I have seen in the comments for this challenge that the algorithm needs to have O(n) complexity to pass. How is this done?
function removeNb (n) {
if(n===1) return null;
let sum = (n * (n+1))/2;
let retArr = [];
let a = n;
while( a !== 0){
let b = n;
while( b !== 0){
if(b != a && a*b == ((sum - b) - a) ){
retArr.push([a,b]);
}
b--;
}
a--;
}
retArr.sort( (a,b) => a[0] - b[0]);
return retArr;
}
Thanks to all for the assistance! Here is my final solution:
function removeNb (n) {
let retArr = [];
let a = 1;
let b = 0;
let sumN = (n * (n+1))/2;
while( a <= n){
b = parseInt((sumN - a) / (a + 1));
if( b < n && a*b == ((sumN - b) - a) )
retArr.push([a,b]);
a++;
}
return retArr;
}
I think my main issue was an (embarrassing) error with my algebra when I attempted to solve for b. Here are the proper steps for anyone wondering:
a*b = sum(1 to n) - a - b
ab + b = sumN - a
b(a + 1) = sumN - a
b = (sumN - a) / (a + 1)

You can solve for b and get: b = (sum - a)/(a + 1) (given a != -1)
Now iterate over a once -> O(n)

let n = 100;
let sumOfNum = n => {
return (n * (n + 1)) / 2;
};
let sum = sumOfNum(n);
let response = [];
for (let i = 1; i <= 26; i++) {
let s = (sum - i) / (i + 1);
if (s % 1 == 0 && s * i == sum - s - i && s <= n) {
response.push([s, i]);
}
}
// this is O(N) time complexity

Here's an implementation:
function removeNb(n){
var sum = (1 + n) * n / 2;
var candidates = [];
// O(n)
for(var y = n; y >= 1; y--){
x = (-y + sum) / (y + 1);
/*
* Since there are infinite real solutions,
* we only record the integer solutions that
* are 1 <= x <= n.
*/
if(x % 1 == 0 && 1 <= x && x <= n)
// Assuming .push is O(1)
candidates.push([x, y]);
}
// Output is guaranteed to be sorted because
// y is iterated from large to small.
return candidates;
}
console.log(removeNb(26));
console.log(removeNb(100));
https://jsfiddle.net/DerekL/anx2ox49/
From your question, it also states that
Within that sequence, he chooses two numbers, a and b.
However it does not mention that a and b are unique numbers, so a check is not included in the code.

As explained in other answers, it is possible to make a O(n) algorithm solving for b. Moreover, given the symmetry of solution -- if (a,b) is a solution, also (b,a) is -- it is also possible to save some iterations adding a couple of solutions at a time. To know how many iterations are required, let us note that b > a if and only if a < -1+sqrt(1+sum). To prove it:
(sum-a)/(a+1) > a ; sum-a > a^2+a ; sum > a^2+2a ; a^2+2a-sum < 0 ; a_1 < a < a_2
where a_1 and a_2 comes from 2-degree equation solution:
a_1 = -1-sqrt(1+sum) ; a_2 = -1+sqrt(1+sum)
Since a_1 < 0 and a > 0, finally we proved that b > a if and only if a < a_2.
Therefore we can avoid iterations after -1+sqrt(1+sum).
A working example:
function removeNb (n) {
if(n===1) return null;
let sum = (n * (n+1))/2;
let retArr = [];
for(let a=1;a<Math.round(Math.sqrt(1+sum));++a) {
if((sum-a)%(a+1)===0) {
let b=(sum-a)/(a+1);
if(a!==b && b<=n) retArr.push([a,b],[b,a]);
}
}
retArr.sort( (a,b) => a[0] - b[0]);
return retArr;
}
However, with this implementation we still need the final sort. To avoid it, we can note that b=(sum-a)/(a+1) is a decreasing function of a (derive it to prove). Therefore we can build retArr concatenating two arrays, one adding elements to the end (push), one adding elements at the beginning (unshift). A working example follows:
function removeNb (n) {
if(n===1) return null;
let sum = (n * (n+1))/2;
let retArr = [];
let retArr2 = [];
for(let a=1;a<Math.round(Math.sqrt(1+sum));++a) {
if((sum-a)%(a+1)===0) {
let b=(sum-a)/(a+1);
if(a!==b && b<=n) {
retArr.push([a,b]);
retArr2.unshift([b,a]); // b>a and b decreases with a
}
}
}
retArr=retArr.concat(retArr2); // the final array is ordered in the 1st component
return retArr;
}
As a non-native speaker, I would say that the phrase from the reference "all (a, b) which are the possible removed numbers in the sequence 1 to n" implies a!=b,
so I added this constraint.

Function to determine largest prime factor

I am trying to write a function in JS that returns a number's maximum "prime" factor. For example, if I ran maxPrimeFactor(57), I should return a 19. However, my function only works part of the time. I have written a helper function called isPrime that returns a boolean that indicates whether a given number is prime.
Can anyone spot-check my logic and give me pointers as to where I may be going wrong/how I can improve my algorithm and implementation? Any help is appreciated.
function isPrime(n){
var flag = true;
for (var i = 2; i < n / 2; i++) {
if (n % i == 0) {
flag = false;
return flag;
}
}
return flag;
}
function maxPrimeFactor (n) {
var max = 1;
for (var i = 1; i <= n/2; i++) {
if (n % i == 0 && isPrime(i)) {
max = i;
}
}
return max;
}

1 is not prime, so if you pass 1 to the function it will return 1 as the max prime factor which is incorrect. Perhaps a check returning a value like NaN or undefined may be helpful to prevent invalid values, this depends on if you need to limit the scope of the inputs.
if (n < 2) {
return NaN;
}
You also need to consider the case for when n is prime. A possible way around this more efficiently would be to initialize max to n, and then if max is never set again, the max prime is n.
function maxPrimeFactor (n) {
var max = n;
for (var i = 2; i <= n/2; i++) {
if (n % i == 0 && isPrime(i)) {
max = i;
}
}
return max;
}
Since the algorithm only cares about the greatest prime factor, if you start counting down from n/2, you can further optimize the function to return the first prime factor that is found, otherwise return the number.
As the local var flag in isPrime() isn't making the code more readable or functional I would remove it . (Also, no need to loop to n/2 as no number has a prime greater than it's square root);
function isPrime(n){
for (var i = 2; i < Math.sqrt(n); i++) {
if (n % i == 0) {
return false;
}
}
return true;
}

I give U a code written in C++ below:
#include <cstdio>
#include <cmath>
int max(int x, int y)
{
return x > y ? x : y;
}
int maxPrime(int x)
{
int mx = -1;
int curX = x;
/*i * i <= x is correct, because there is only one prime factor larger than
Sqrt(x), it's power must be 1, and actually it is curX after this loop, because
all prime factor less or equal than Sqrt(x) is eliminated.*/
for(int i = 2; i * i <= x; ++i)
{
while(curX % i == 0)
{
/*Here i must be a prime. consider Prime factorization
x = p1^q1 * p2^q2 * p3^q3...(p1<p2<p3...)
the first number that satisfied x % i == 0 must be p1, it's prime!
and p2 > p1 so I can continue to enumerate i, don't need to reset i to 2.
curX = x/(p1^q1 * p2^q2 * ... * pj^qj) and i = p[j+1]
*/
curX /= i, mx = max(i, mx);
}
}
return max(mx, curX);
}
int main()
{
int n;
scanf("%d", &n);
//I suppose n is positive
if(n == 1) //1 is not prime
printf("No solution\n");
else
printf("%d\n", maxPrime(n));
return 0;
}
This code reaches a worst case running time O(Sqrt(n))
And your code is wrong, because when n is a prime, your code cannot get the right answer.
And your code's efficiency is not good.
If you want a faster code, you can learn Pollard Rho or SQUFOF.

How to find prime numbers between 0 - 100?

Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
In Javascript how would i find prime numbers between 0 - 100? i have thought about it, and i am not sure how to find them. i thought about doing x % x but i found the obvious problem with that.
this is what i have so far:
but unfortunately it is the worst code ever.
var prime = function (){
var num;
for (num = 0; num < 101; num++){
if (num % 2 === 0){
break;
}
else if (num % 3 === 0){
break;
}
else if (num % 4=== 0){
break;
}
else if (num % 5 === 0){
break;
}
else if (num % 6 === 0){
break;
}
else if (num % 7 === 0){
break;
}
else if (num % 8 === 0){
break;
}
else if (num % 9 === 0){
break;
}
else if (num % 10 === 0){
break;
}
else if (num % 11 === 0){
break;
}
else if (num % 12 === 0){
break;
}
else {
return num;
}
}
};
console.log(prime());

Here's an example of a sieve implementation in JavaScript:
function getPrimes(max) {
var sieve = [], i, j, primes = [];
for (i = 2; i <= max; ++i) {
if (!sieve[i]) {
// i has not been marked -- it is prime
primes.push(i);
for (j = i << 1; j <= max; j += i) {
sieve[j] = true;
}
}
}
return primes;
}
Then getPrimes(100) will return an array of all primes between 2 and 100 (inclusive). Of course, due to memory constraints, you can't use this with large arguments.
A Java implementation would look very similar.

Here's how I solved it. Rewrote it from Java to JavaScript, so excuse me if there's a syntax error.
function isPrime (n)
{
if (n < 2) return false;
/**
* An integer is prime if it is not divisible by any prime less than or equal to its square root
**/
var q = Math.floor(Math.sqrt(n));
for (var i = 2; i <= q; i++)
{
if (n % i == 0)
{
return false;
}
}
return true;
}
A number, n, is a prime if it isn't divisible by any other number other than by 1 and itself. Also, it's sufficient to check the numbers [2, sqrt(n)].

Here is the live demo of this script: http://jsfiddle.net/K2QJp/
First, make a function that will test if a single number is prime or not. If you want to extend the Number object you may, but I decided to just keep the code as simple as possible.
function isPrime(num) {
if(num < 2) return false;
for (var i = 2; i < num; i++) {
if(num%i==0)
return false;
}
return true;
}
This script goes through every number between 2 and 1 less than the number and tests if there is any number in which there is no remainder if you divide the number by the increment. If there is any without a remainder, it is not prime. If the number is less than 2, it is not prime. Otherwise, it is prime.
Then make a for loop to loop through the numbers 0 to 100 and test each number with that function. If it is prime, output the number to the log.
for(var i = 0; i < 100; i++){
if(isPrime(i)) console.log(i);
}

Whatever the language, one of the best and most accessible ways of finding primes within a range is using a sieve.
Not going to give you code, but this is a good starting point.
For a small range, such as yours, the most efficient would be pre-computing the numbers.

I have slightly modified the Sieve of Sundaram algorithm to cut the unnecessary iterations and it seems to be very fast.
This algorithm is actually two times faster than the most accepted #Ted Hopp's solution under this topic. Solving the 78498 primes between 0 - 1M takes like 20~25 msec in Chrome 55 and < 90 msec in FF 50.1. Also #vitaly-t's get next prime algorithm looks interesting but also results much slower.
This is the core algorithm. One could apply segmentation and threading to get superb results.
"use strict";
function primeSieve(n){
var a = Array(n = n/2),
t = (Math.sqrt(4+8*n)-2)/4,
u = 0,
r = [];
for(var i = 1; i <= t; i++){
u = (n-i)/(1+2*i);
for(var j = i; j <= u; j++) a[i + j + 2*i*j] = true;
}
for(var i = 0; i<= n; i++) !a[i] && r.push(i*2+1);
return r;
}
var primes = [];
console.time("primes");
primes = primeSieve(1000000);
console.timeEnd("primes");
console.log(primes.length);
The loop limits explained:
Just like the Sieve of Erasthotenes, the Sieve of Sundaram algorithm also crosses out some selected integers from the list. To select which integers to cross out the rule is i + j + 2ij ≤ n where i and j are two indices and n is the number of the total elements. Once we cross out every i + j + 2ij, the remaining numbers are doubled and oddified (2n+1) to reveal a list of prime numbers. The final stage is in fact the auto discounting of the even numbers. It's proof is beautifully explained here.
Sieve of Sundaram is only fast if the loop indices start and end limits are correctly selected such that there shall be no (or minimal) redundant (multiple) elimination of the non-primes. As we need i and j values to calculate the numbers to cross out, i + j + 2ij up to n let's see how we can approach.
i) So we have to find the the max value i and j can take when they are equal. Which is 2i + 2i^2 = n. We can easily solve the positive value for i by using the quadratic formula and that is the line with t = (Math.sqrt(4+8*n)-2)/4,
j) The inner loop index j should start from i and run up to the point it can go with the current i value. No more than that. Since we know that i + j + 2ij = n, this can easily be calculated as u = (n-i)/(1+2*i);
While this will not completely remove the redundant crossings it will "greatly" eliminate the redundancy. For instance for n = 50 (to check for primes up to 100) instead of doing 50 x 50 = 2500, we will do only 30 iterations in total. So clearly, this algorithm shouldn't be considered as an O(n^2) time complexity one.
i j v
1 1 4
1 2 7
1 3 10
1 4 13
1 5 16
1 6 19
1 7 22 <<
1 8 25
1 9 28
1 10 31 <<
1 11 34
1 12 37 <<
1 13 40 <<
1 14 43
1 15 46
1 16 49 <<
2 2 12
2 3 17
2 4 22 << dupe #1
2 5 27
2 6 32
2 7 37 << dupe #2
2 8 42
2 9 47
3 3 24
3 4 31 << dupe #3
3 5 38
3 6 45
4 4 40 << dupe #4
4 5 49 << dupe #5
among which there are only 5 duplicates. 22, 31, 37, 40, 49. The redundancy is around 20% for n = 100 however it increases to ~300% for n = 10M. Which means a further optimization of SoS bears the potentital to obtain the results even faster as n grows. So one idea might be segmentation and to keep n small all the time.
So OK.. I have decided to take this quest a little further.
After some careful examination of the repeated crossings I have come to the awareness of the fact that, by the exception of i === 1 case, if either one or both of the i or j index value is among 4,7,10,13,16,19... series, a duplicate crossing is generated. Then allowing the inner loop to turn only when i%3-1 !== 0, a further cut down like 35-40% from the total number of the loops is achieved. So for instance for 1M integers the nested loop's total turn count dropped to like 1M from 1.4M. Wow..! We are talking almost O(n) here.
I have just made a test. In JS, just an empty loop counting up to 1B takes like 4000ms. In the below modified algorithm, finding the primes up to 100M takes the same amount of time.
I have also implemented the segmentation part of this algorithm to push to the workers. So that we will be able to use multiple threads too. But that code will follow a little later.
So let me introduce you the modified Sieve of Sundaram probably at it's best when not segmented. It shall compute the primes between 0-1M in about 15-20ms with Chrome V8 and Edge ChakraCore.
"use strict";
function primeSieve(n){
var a = Array(n = n/2),
t = (Math.sqrt(4+8*n)-2)/4,
u = 0,
r = [];
for(var i = 1; i < (n-1)/3; i++) a[1+3*i] = true;
for(var i = 2; i <= t; i++){
u = (n-i)/(1+2*i);
if (i%3-1) for(var j = i; j < u; j++) a[i + j + 2*i*j] = true;
}
for(var i = 0; i< n; i++) !a[i] && r.push(i*2+1);
return r;
}
var primes = [];
console.time("primes");
primes = primeSieve(1000000);
console.timeEnd("primes");
console.log(primes.length);
Well... finally I guess i have implemented a sieve (which is originated from the ingenious Sieve of Sundaram) such that it's the fastest JavaScript sieve that i could have found over the internet, including the "Odds only Sieve of Eratosthenes" or the "Sieve of Atkins". Also this is ready for the web workers, multi-threading.
Think it this way. In this humble AMD PC for a single thread, it takes 3,300 ms for JS just to count up to 10^9 and the following optimized segmented SoS will get me the 50847534 primes up to 10^9 only in 14,000 ms. Which means 4.25 times the operation of just counting. I think it's impressive.
You can test it for yourself;
console.time("tare");
for (var i = 0; i < 1000000000; i++);
console.timeEnd("tare");
And here I introduce you to the segmented Seieve of Sundaram at it's best.
"use strict";
function findPrimes(n){
function primeSieve(g,o,r){
var t = (Math.sqrt(4+8*(g+o))-2)/4,
e = 0,
s = 0;
ar.fill(true);
if (o) {
for(var i = Math.ceil((o-1)/3); i < (g+o-1)/3; i++) ar[1+3*i-o] = false;
for(var i = 2; i < t; i++){
s = Math.ceil((o-i)/(1+2*i));
e = (g+o-i)/(1+2*i);
if (i%3-1) for(var j = s; j < e; j++) ar[i + j + 2*i*j-o] = false;
}
} else {
for(var i = 1; i < (g-1)/3; i++) ar[1+3*i] = false;
for(var i = 2; i < t; i++){
e = (g-i)/(1+2*i);
if (i%3-1) for(var j = i; j < e; j++) ar[i + j + 2*i*j] = false;
}
}
for(var i = 0; i < g; i++) ar[i] && r.push((i+o)*2+1);
return r;
}
var cs = n <= 1e6 ? 7500
: n <= 1e7 ? 60000
: 100000, // chunk size
cc = ~~(n/cs), // chunk count
xs = n % cs, // excess after last chunk
ar = Array(cs/2), // array used as map
result = [];
for(var i = 0; i < cc; i++) result = primeSieve(cs/2,i*cs/2,result);
result = xs ? primeSieve(xs/2,cc*cs/2,result) : result;
result[0] *=2;
return result;
}
var primes = [];
console.time("primes");
primes = findPrimes(1000000000);
console.timeEnd("primes");
console.log(primes.length);
Here I present a multithreaded and slightly improved version of the above algorithm. It utilizes all available threads on your device and resolves all 50,847,534 primes up to 1e9 (1 Billion) in the ballpark of 1.3 seconds on my trash AMD FX-8370 8 core desktop.
While there exists some very sophisticated sublinear sieves, I believe the modified Segmented Sieve of Sundaram could only be stretced this far to being linear in time complexity. Which is not bad.
class Threadable extends Function {
constructor(f){
super("...as",`return ${f.toString()}.apply(this,as)`);
}
spawn(...as){
var code = `self.onmessage = m => self.postMessage(${this.toString()}.apply(null,m.data));`,
blob = new Blob([code], {type: "text/javascript"}),
wrkr = new Worker(window.URL.createObjectURL(blob));
return new Promise((v,x) => ( wrkr.onmessage = m => (v(m.data), wrkr.terminate())
, wrkr.onerror = e => (x(e.message), wrkr.terminate())
, wrkr.postMessage(as)
));
}
}
function pi(n){
function scan(start,end,tid){
function sieve(g,o){
var t = (Math.sqrt(4+8*(g+o))-2)/4,
e = 0,
s = 0,
a = new Uint8Array(g),
c = 0,
l = o ? (g+o-1)/3
: (g-1)/3;
if (o) {
for(var i = Math.ceil((o-1)/3); i < l; i++) a[1+3*i-o] = 0x01;
for(var i = 2; i < t; i++){
if (i%3-1) {
s = Math.ceil((o-i)/(1+2*i));
e = (g+o-i)/(1+2*i);
for(var j = s; j < e; j++) a[i + j + 2*i*j-o] = 0x01;
}
}
} else {
for(var i = 1; i < l; i++) a[1+3*i] = 0x01;
for(var i = 2; i < t; i++){
if (i%3-1){
e = (g-i)/(1+2*i);
for(var j = i; j < e; j++) a[i + j + 2*i*j] = 0x01;
}
}
}
for (var i = 0; i < g; i++) !a[i] && c++;
return c;
}
end % 2 && end--;
start % 2 && start--;
var n = end - start,
cs = n < 2e6 ? 1e4 :
n < 2e7 ? 2e5 :
4.5e5 , // Math.floor(3*n/1e3), // chunk size
cc = Math.floor(n/cs), // chunk count
xs = n % cs, // excess after last chunk
pc = 0;
for(var i = 0; i < cc; i++) pc += sieve(cs/2,(start+i*cs)/2);
xs && (pc += sieve(xs/2,(start+cc*cs)/2));
return pc;
}
var tc = navigator.hardwareConcurrency,
xs = n % tc,
cs = (n-xs) / tc,
st = new Threadable(scan),
ps = Array.from( {length:tc}
, (_,i) => i ? st.spawn(i*cs+xs,(i+1)*cs+xs,i)
: st.spawn(0,cs+xs,i)
);
return Promise.all(ps);
}
var n = 1e9,
count;
console.time("primes");
pi(n).then(cs => ( count = cs.reduce((p,c) => p+c)
, console.timeEnd("primes")
, console.log(count)
)
)
.catch(e => console.log(`Error: ${e}`));
So this is as far as I could take the Sieve of Sundaram.

A number is a prime if it is not divisible by other primes lower than the number in question.
So this builds up a primes array. Tests each new odd candidate n for division against existing found primes lower than n. As an optimization it does not consider even numbers and prepends 2 as a final step.
var primes = [];
for(var n=3;n<=100;n+=2) {
if(primes.every(function(prime){return n%prime!=0})) {
primes.push(n);
}
}
primes.unshift(2);

To find prime numbers between 0 to n. You just have to check if a number x is getting divisible by any number between 0 - (square root of x). If we pass n and to find all prime numbers between 0 and n, logic can be implemented as -
function findPrimeNums(n)
{
var x= 3,j,i=2,
primeArr=[2],isPrime;
for (;x<=n;x+=2){
j = (int) Math.sqrt (x);
isPrime = true;
for (i = 2; i <= j; i++)
{
if (x % i == 0){
isPrime = false;
break;
}
}
if(isPrime){
primeArr.push(x);
}
}
return primeArr;
}

var n=100;
var counter = 0;
var primeNumbers = "Prime Numbers: ";
for(var i=2; i<=n; ++i)
{
counter=0;
for(var j=2; j<=n; ++j)
{
if(i>=j && i%j == 0)
{
++counter;
}
}
if(counter == 1)
{
primeNumbers = primeNumbers + i + " ";
}
}
console.log(primeNumbers);

Luchian's answer gives you a link to the standard technique for finding primes.
A less efficient, but simpler approach is to turn your existing code into a nested loop. Observe that you are dividing by 2,3,4,5,6 and so on ... and turn that into a loop.
Given that this is homework, and given that the aim of the homework is to help you learn basic programming, a solution that is simple, correct but somewhat inefficient should be fine.

Using recursion combined with the square root rule from here, checks whether a number is prime or not:
function isPrime(num){
// An integer is prime if it is not divisible by any prime less than or equal to its square root
var squareRoot = parseInt(Math.sqrt(num));
var primeCountUp = function(divisor){
if(divisor > squareRoot) {
// got to a point where the divisor is greater than
// the square root, therefore it is prime
return true;
}
else if(num % divisor === 0) {
// found a result that divides evenly, NOT prime
return false;
}
else {
// keep counting
return primeCountUp(++divisor);
}
};
// start # 2 because everything is divisible by 1
return primeCountUp(2);
}

You can try this method also, this one is basic but easy to understand:
var tw = 2, th = 3, fv = 5, se = 7;
document.write(tw + "," + th + ","+ fv + "," + se + ",");
for(var n = 0; n <= 100; n++)
{
if((n % tw !== 0) && (n % th !==0) && (n % fv !==0 ) && (n % se !==0))
{
if (n == 1)
{
continue;
}
document.write(n +",");
}
}

I recently came up with a one-line solution that accomplishes exactly this for a JS challenge on Scrimba (below).
ES6+
const getPrimes=num=>Array(num-1).fill().map((e,i)=>2+i).filter((e,i,a)=>a.slice(0,i).every(x=>e%x!==0));
< ES6
function getPrimes(num){return ",".repeat(num).slice(0,-1).split(',').map(function(e,i){return i+1}).filter(function(e){return e>1}).filter(function(x){return ",".repeat(x).slice(0,-1).split(',').map(function(f,j){return j}).filter(function(e){return e>1}).every(function(e){return x%e!==0})})};
This is the logic explained:
First, the function builds an array of all numbers leading up to the desired number (in this case, 100) via the .repeat() function using the desired number (100) as the repeater argument and then mapping the array to the indexes+1 to get the range of numbers from 0 to that number (0-100). A bit of string splitting and joining magic going on here. I'm happy to explain this step further if you like.
We exclude 0 and 1 from the array as they should not be tested for prime, lest they give a false positive. Neither are prime. We do this using .filter() for only numbers > 1 (≥ 2).
Now, we filter our new array of all integers between 2 and the desired number (100) for only prime numbers. To filter for prime numbers only, we use some of the same magic from our first step. We use .filter() and .repeat() once again to create a new array from 2 to each value from our new array of numbers. For each value's new array, we check to see if any of the numbers ≥ 2 and < that number are factors of the number. We can do this using the .every() method paired with the modulo operator % to check if that number has any remainders when divided by any of those values between 2 and itself. If each value has remainders (x%e!==0), the condition is met for all values from 2 to that number (but not including that number, i.e.: [2,99]) and we can say that number is prime. The filter functions returns all prime numbers to the uppermost return, thereby returning the list of prime values between 2 and the passed value.
As an example, using one of these functions I've added above, returns the following:
getPrimes(100);
// => [2,3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61,67,71,73,79,83,89,97]

Here's a fast way to calculate primes in JavaScript, based on the previous prime value.
function nextPrime(value) {
if (value > 2) {
var i, q;
do {
i = 3;
value += 2;
q = Math.floor(Math.sqrt(value));
while (i <= q && value % i) {
i += 2;
}
} while (i <= q);
return value;
}
return value === 2 ? 3 : 2;
}
Test
var value = 0, result = [];
for (var i = 0; i < 10; i++) {
value = nextPrime(value);
result.push(value);
}
console.log("Primes:", result);
Output
Primes: [ 2, 3, 5, 7, 11, 13, 17, 19, 23, 29 ]
It is faster than other alternatives published here, because:
It aligns the loop limit to an integer, which works way faster;
It uses a shorter iteration loop, skipping even numbers.
It can give you the first 100,000 primes in about 130ms, or the first 1m primes in about 4 seconds.
function nextPrime(value) {
if (value > 2) {
var i, q;
do {
i = 3;
value += 2;
q = Math.floor(Math.sqrt(value));
while (i <= q && value % i) {
i += 2;
}
} while (i <= q);
return value;
}
return value === 2 ? 3 : 2;
}
var value, result = [];
for (var i = 0; i < 10; i++) {
value = nextPrime(value);
result.push(value);
}
display("Primes: " + result.join(', '));
function display(msg) {
document.body.insertAdjacentHTML(
"beforeend",
"<p>" + msg + "</p>"
);
}
UPDATE
A modern, efficient way of doing it, using prime-lib:
import {generatePrimes, stopWhen} from 'prime-lib';
const p = generatePrimes(); //=> infinite prime generator
const i = stopWhen(p, a => a > 100); //=> Iterable<number>
console.log(...i); //=> 2 3 5 7 11 ... 89 97

<code>
<script language="javascript">
var n=prompt("Enter User Value")
var x=1;
if(n==0 || n==1) x=0;
for(i=2;i<n;i++)
{
if(n%i==0)
{
x=0;
break;
}
}
if(x==1)
{
alert(n +" "+" is prime");
}
else
{
alert(n +" "+" is not prime");
}
</script>

Sieve of Eratosthenes. its bit look but its simple and it works!
function count_prime(arg) {
arg = typeof arg !== 'undefined' ? arg : 20; //default value
var list = [2]
var list2 = [0,1]
var real_prime = []
counter = 2
while (counter < arg ) {
if (counter % 2 !== 0) {
list.push(counter)
}
counter++
}
for (i = 0; i < list.length - 1; i++) {
var a = list[i]
for (j = 0; j < list.length - 1; j++) {
if (list[j] % a === 0 && list[j] !== a) {
list[j] = false; // assign false to non-prime numbers
}
}
if (list[i] !== false) {
real_prime.push(list[i]); // save all prime numbers in new array
}
}
}
window.onload=count_prime(100);

And this famous code from a famous JS Ninja
var isPrime = n => Array(Math.ceil(Math.sqrt(n)+1)).fill().map((e,i)=>i).slice(2).every(m => n%m);
console.log(Array(100).fill().map((e,i)=>i+1).slice(1).filter(isPrime));

A list built using the new features of ES6, especially with generator.
Go to https://codepen.io/arius/pen/wqmzGp made in Catalan language for classes with my students. I hope you find it useful.
function* Primer(max) {
const infinite = !max && max !== 0;
const re = /^.?$|^(..+?)\1+$/;
let current = 1;
while (infinite || max-- ) {
if(!re.test('1'.repeat(current)) == true) yield current;
current++
};
};
let [...list] = Primer(100);
console.log(list);

Here's the very simple way to calculate primes between a given range(1 to limit).
Simple Solution:
public static void getAllPrimeNumbers(int limit) {
System.out.println("Printing prime number from 1 to " + limit);
for(int number=2; number<=limit; number++){
//***print all prime numbers upto limit***
if(isPrime(number)){
System.out.println(number);
}
}
}
public static boolean isPrime(int num) {
if (num == 0 || num == 1) {
return false;
}
if (num == 2) {
return true;
}
for (int i = 2; i <= num / 2; i++) {
if (num % i == 0) {
return false;
}
}
return true;
}

A version without any loop. Use this against any array you have. ie.,
[1,2,3...100].filter(x=>isPrime(x));
const isPrime = n => {
if(n===1){
return false;
}
if([2,3,5,7].includes(n)){
return true;
}
return n%2!=0 && n%3!=0 && n%5!=0 && n%7!=0;
}

Here's my stab at it.
Change the initial i=0 from 0 to whatever you want, and the the second i<100 from 100 to whatever to get primes in a different range.
for(var i=0; i<100000; i++){
var devisableCount = 2;
for(var x=0; x<=i/2; x++){
if (devisableCount > 3) {
break;
}
if(i !== 1 && i !== 0 && i !== x){
if(i%x === 0){
devisableCount++;
}
}
}
if(devisableCount === 3){
console.log(i);
}
}
I tried it with 10000000 - it takes some time but appears to be accurate.

Here are the Brute-force iterative method and Sieve of Eratosthenes method to find prime numbers upto n. The performance of the second method is better than first in terms of time complexity
Brute-force iterative
function findPrime(n) {
var res = [2],
isNotPrime;
for (var i = 3; i < n; i++) {
isNotPrime = res.some(checkDivisorExist);
if ( !isNotPrime ) {
res.push(i);
}
}
function checkDivisorExist (j) {
return i % j === 0;
}
return res;
}
Sieve of Eratosthenes method
function seiveOfErasthones (n) {
var listOfNum =range(n),
i = 2;
// CHeck only until the square of the prime is less than number
while (i*i < n && i < n) {
listOfNum = filterMultiples(listOfNum, i);
i++;
}
return listOfNum;
function range (num) {
var res = [];
for (var i = 2; i <= num; i++) {
res.push(i);
}
return res;
}
function filterMultiples (list, x) {
return list.filter(function (item) {
// Include numbers smaller than x as they are already prime
return (item <= x) || (item > x && item % x !== 0);
});
}
}

You can use this for any size of array of prime numbers. Hope this helps
function prime() {
var num = 2;
var body = document.getElementById("solution");
var len = arguments.length;
var flag = true;
for (j = 0; j < len; j++) {
for (i = num; i < arguments[j]; i++) {
if (arguments[j] % i == 0) {
body.innerHTML += arguments[j] + " False <br />";
flag = false;
break;
} else {
flag = true;
}
}
if (flag) {
body.innerHTML += arguments[j] + " True <br />";
}
}
}
var data = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
prime.apply(null, data);
<div id="solution">
</div>

public static void main(String[] args) {
int m = 100;
int a[] =new int[m];
for (int i=2; i<m; i++)
for (int j=0; j<m; j+=i)
a[j]++;
for (int i=0; i<m; i++)
if (a[i]==1) System.out.println(i);
}

Using Sieve of Eratosthenes, source on Rosettacode
fastest solution: https://repl.it/#caub/getPrimes-bench
function getPrimes(limit) {
if (limit < 2) return [];
var sqrtlmt = limit**.5 - 2;
var nums = Array.from({length: limit-1}, (_,i)=>i+2);
for (var i = 0; i <= sqrtlmt; i++) {
var p = nums[i]
if (p) {
for (var j = p * p - 2; j < nums.length; j += p)
nums[j] = 0;
}
}
return nums.filter(x => x); // return non 0 values
}
document.body.innerHTML = `<pre style="white-space:pre-wrap">${getPrimes(100).join(', ')}</pre>`;
// for fun, this fantasist regexp way (very inefficient):
// Array.from({length:101}, (_,i)=>i).filter(n => n>1&&!/^(oo+)\1+$/.test('o'.repeat(n))

Why try deleting by 4 (and 6,8,10,12) if we've already tried deleting by 2 ?
Why try deleting by 9 if we've already tried deleting by 3 ?
Why try deleting by 11 if 11 * 11 = 121 which is greater than 100 ?
Why try deleting any odd number by 2 at all?
Why try deleting any even number above 2 by anything at all?
Eliminate the dead tests and you'll get yourself a good code, testing for primes below 100.
And your code is very far from being the worst code ever. Many many others would try dividing 100 by 99. But the absolute champion would generate all products of 2..96 with 2..96 to test whether 97 is among them. That one really is astonishingly inefficient.
Sieve of Eratosthenes of course is much better, and you can have one -- under 100 -- with no arrays of booleans (and no divisions too!):
console.log(2)
var m3 = 9, m5 = 25, m7 = 49, i = 3
for( ; i < 100; i += 2 )
{
if( i != m3 && i != m5 && i != m7) console.log(i)
else
{
if( i == m3 ) m3 += 6
if( i == m5 ) m5 += 10
if( i == m7 ) m7 += 14
}
} "DONE"
This is the sieve of Eratosthenes, were we skip over the composites - and that's what this code is doing. The timing of generation of composites and of skipping over them (by checking for equality) is mixed into one timeline. The usual sieve first generates composites and marks them in an array, then sweeps the array. Here the two stages are mashed into one, to avoid having to use any array at all (this only works because we know the top limit's square root - 10 - in advance and use only primes below it, viz. 3,5,7 - with 2's multiples, i.e. evens, implicitly skipped over in advance).
In other words this is an incremental sieve of Eratosthenes and m3, m5, m7 form an implicit priority queue of the multiples of primes 3, 5, and 7.

I was searching how to find out prime number and went through above code which are too long. I found out a new easy solution for prime number and add them using filter. Kindly suggest me if there is any mistake in my code as I am a beginner.
function sumPrimes(num) {
let newNum = [];
for(let i = 2; i <= num; i++) {
newNum.push(i)
}
for(let i in newNum) {
newNum = newNum.filter(item => item == newNum[i] || item % newNum[i] !== 0)
}
return newNum.reduce((a,b) => a+b)
}
sumPrimes(10);

Here is an efficient, short solution using JS generators. JSfiddle
// Consecutive integers
let nats = function* (n) {
while (true) yield n++
}
// Wrapper generator
let primes = function* () {
yield* sieve(primes(), nats(2))
}
// The sieve itself; only tests primes up to sqrt(n)
let sieve = function* (pg, ng) {
yield ng.next().value;
let n, p = pg.next().value;
while ((n = ng.next().value) < p * p) yield n;
yield* sieve(pg, (function* () {
while (n = ng.next().value) if (n % p) yield n
})())
}
// Longest prefix of stream where some predicate holds
let take = function* (vs, fn) {
let nx;
while (!(nx = vs.next()).done && fn(nx.value)) yield nx.value
}
document.querySelectorAll('dd')[0].textContent =
// Primes smaller than 100
[...take(primes(), x => x < 100)].join(', ')
<dl>
<dt>Primes under 100</dt>
<dd></dd>
</dl>

First, change your inner code for another loop (for and while) so you can repeat the same code for different values.
More specific for your problem, if you want to know if a given n is prime, you need to divide it for all values between 2 and sqrt(n). If any of the modules is 0, it is not prime.
If you want to find all primes, you can speed it and check n only by dividing by the previously found primes. Another way of speeding the process is the fact that, apart from 2 and 3, all the primes are 6*k plus or less 1.

It would behoove you, if you're going to use any of the gazillion algorithms that you're going to be presented with in this thread, to learn to memoize some of them.
See Interview question : What is the fastest way to generate prime number recursively?

Use following function to find out prime numbers :
function primeNumbers() {
var p
var n = document.primeForm.primeText.value
var d
var x
var prime
var displayAll = 2 + " "
for (p = 3; p <= n; p = p + 2) {
x = Math.sqrt(p)
prime = 1
for (d = 3; prime && (d <= x); d = d + 2)
if ((p % d) == 0) prime = 0
else prime = 1
if (prime == 1) {
displayAll = displayAll + p + " "
}
}
document.primeForm.primeArea.value = displayAll
}

Looking for a formula to check if a number is the product of a number 2 or greater times a number 3 or greater

I am looking for a formula to use in an IF statement to determine if a given number is the product of a number 2 or greater multiplied by a number 3 or greater.
For instance, 6 is the smallest number that meets the requirement (2 x 3). 7 doesn't, 8 does (2 x 4), 9 does (3 x 3), 10 does (2 x 5), 11 doesn't, 12 does (2 x 6), etc.
Any ideas?
Thanks!

Sounds like you're doing primality testing. You should check out that Wikipedia article - they've got several algorithms to pick from.
Hope that helps!

To check is a number is a multiple of 2, use the mod (%) operator.
so
if((x%2 == 0) || (x%3 == 0) )
//x is a multiple of 2 or 3

This finds the smallest factor for n that is at least 2, then finds the smallest factor that is greater than that and greater than 3, and once it does, it returns true.
function myFunction(n) {
if (isNaN(n) || !isFinite(n) || n%1 || n<6) return false;
var m = Math.sqrt(n);
for (var i = 2; i <= m; i++) {
if (n % i == 0) {
var divided = n / i;
for (var j = (i > 2) ? i : 3; i <= n / i; i++) {
if (divided % j == 0) {
return true;
}
}
}
}
return false;
}

x needs to be a multiple of two factors...(y, z)
flag = false; (boolean. set when found);
for(var y = 2; y < x; y++){
for(var z = 3; z <= (x/y); z++){
if(y*z == x){
flag = true;
}
}
}
if(flag){
now we know that x meets the requirements
}