Related
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
This question already has answers here:
Event binding on dynamically created elements?
(23 answers)
Closed 5 years ago.
<html>
<head>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript">
$(document).ready(function() {
$("button").click(function() {
$("h2").html("<p class='test'>click me</p>")
});
$(".test").click(function(){
alert();
});
});
</script>
</head>
<body>
<h2></h2>
<button>generate new element</button>
</body>
</html>
I was trying to generate a new tag with class name test in the <h2> by clicking the button. I also defined a click event associated with test. But the event doesn't work.
Can anyone help?
The click() binding you're using is called a "direct" binding which will only attach the handler to elements that already exist. It won't get bound to elements created in the future. To do that, you'll have to create a "delegated" binding by using on().
Delegated events have the advantage that they can process events from descendant elements that are added to the document at a later time.
Source
Here's what you're looking for:
var counter = 0;
$("button").click(function() {
$("h2").append("<p class='test'>click me " + (++counter) + "</p>")
});
// With on():
$("h2").on("click", "p.test", function(){
alert($(this).text());
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script>
<h2></h2>
<button>generate new element</button>
The above works for those using jQuery version 1.7+. If you're using an older version, refer to the previous answer below.
Previous Answer:
Try using live():
$("button").click(function(){
$("h2").html("<p class='test'>click me</p>")
});
$(".test").live('click', function(){
alert('you clicked me!');
});
Worked for me. Tried it with jsFiddle.
Or there's a new-fangled way of doing it with delegate():
$("h2").delegate("p", "click", function(){
alert('you clicked me again!');
});
An updated jsFiddle.
Use the .on() method with delegated events
$('#staticParent').on('click', '.dynamicElement', function() {
// Do something on an existent or future .dynamicElement
});
The .on() method allows you to delegate any desired event handler to:
current elements or future elements added to the DOM at a later time.
P.S: Don't use .live()! From jQuery 1.7+ the .live() method is deprecated.
Reason:
In jQuery, Click() event Direct binding which attaches the event handler to the element only if the particular element(Html code) exists on the page(after page loads).
Dynamic elements are created with the help of javascript or jquery(not in Html).
It won't consider the future elements(Dynamic) which are created after the page gets loaded.
So the normal click event won't fire on the dynamic element.
Solution :
To overcome this, we should use on() function. on() can delegate the event for both the current and future elements.
Delegated events have the advantage that can attach the handler to the elements which are being added to the document in the future.
Note : delegate(),live() and on() functions have the advantages over the DOM elements. As of JQuery 1.7 delegate() and live() are deprecated(Don't use these).
on() only Can delegate the event for both current and future elements.
So, Your code should be like this
Remove the code from $(document).ready:
$(".test").click(function(){
alert();
});
Change into:
$(document).on('click','.test',function(){
alert('Clicked');
});
Add this function in your js file.
It will work on every browser
$(function() {
$(document).on("click", '#mydiv', function() {
alert("You have just clicked on ");
});
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id='mydiv'>Div</div>
Change
$(".test").click(function(){
To
$(".test").live('click', function(){
LIVE DEMO
jQuery .live()
You need to use .live for this to work:
$(".test").live("click", function(){
alert();
});
or if you're using jquery 1.7+ use .on:
$(".test").on("click", "p", function(){
alert();
});
Try .live() or .delegate()
http://api.jquery.com/live/
http://api.jquery.com/delegate/
Your .test element was added after the .click() method, so it didn't have the event attached to it. Live and Delegate give that event trigger to parent elements which check their children, so anything added afterwards still works. I think Live will check the entire document body, while Delegate can be given to an element, so Delegate is more efficient.
More info:
http://www.alfajango.com/blog/the-difference-between-jquerys-bind-live-and-delegate/
I found two solutions at the jQuery's documentation:
First: Use delegate on Body or Document
E.g:
$("body").delegate('.test', 'click', function(){
...
alert('test');
});
Why?
Answer: Attach a handler to one or more events for all elements that match the selector, now or in the future, based on a specific set of root elements.
link: http://api.jquery.com/delegate/
Second: Put the your function at the "$( document )", using "on" and attach it to the element that you want to trigger this.
The first parameter is the "event handler", the second: the element and the third: the function.
E.g:
$( document ).on( 'click', '.test', function () {
...
alert('test');
});
Why?
Answer: Event handlers are bound only to the currently selected elements; they must exist on the page at the time your code makes the call to .on(). To ensure the elements are present and can be selected, perform event binding inside a document ready handler for elements that are in the HTML markup on the page. If new HTML is being injected into the page, select the elements and attach event handlers after the new HTML is placed into the page. Or, use delegated events to attach an event handler, as described next ...
link: https://api.jquery.com/on/
Best way to apply event on dynamically generated content by using delegation.
$(document).on("eventname","selector",function(){
// code goes here
});
so your code is like this now
$(document).on("click",".test",function(){
// code goes here
});
$(.surrounding_div_class).on( 'click', '.test', function () {
alert( 'WORKS!' );
});
Will only work if the DIV with the class .surrounding_div_class is the immediate parent to the object .test
If there is another object in the div that will be filled it wont work.
The problem you have is that you're attempting to bind the "test" class to the event before there is anything with a "test" class in the DOM. Although it may seem like this is all dynamic, what is really happening is JQuery makes a pass over the DOM and wires up the click event when the ready() function fired, which happens before you created the "Click Me" in your button event.
By adding the "test" Click event to the "button" click handler it will wire it up after the correct element exists in the DOM.
<script type="text/javascript">
$(document).ready(function(){
$("button").click(function(){
$("h2").html("<p class='test'>click me</p>")
$(".test").click(function(){
alert()
});
});
});
</script>
Using live() (as others have pointed out) is another way to do this but I felt it was also a good idea to point out the minor error in your JS code. What you wrote wasn't wrong, it just needed to be correctly scoped. Grasping how the DOM and JS works is one of the tricky things for many traditional developers to wrap their head around.
live() is a cleaner way to handle this and in most cases is the correct way to go. It essentially is watching the DOM and re-wiring things whenever the elements within it change.
An alternate and more succinct alternative (IMHO) is to use a raw javascript function that responds to an on click event, then pass the target element back to jQuery if you like. The advantage of this approach is that you can dynamically add your element anywhere, and the click handler will 'just work', and you need not concern yourself with delegating control to parent elements, and so on.
Step 1: Update the dynamic html to fire an onclick event. Be sure to pass the 'event' object as an argument
$("button").click(function() {
$("h2").html("<p class='test' onclick='test(event)'> click me </p>")
});
Step 2: Create the test function to respond to the click event
function test(e){
alert();
});
Optional Step 3: Given you are using jQuery I'm assuming it will be useful to get a reference back to the source button
function test(e){
alert();
// Get a reference to the button
// An explanation of this line is available here
var target = (e.target)? e.target : e.srcElement;
// Pass the button reference to jQuery to do jQuery magic
var $btn = $(target);
});
.live function works great.
It is for Dynamically added elements to the stage.
$('#selectAllAssetTypes').live('click', function(event){
alert("BUTTON CLICKED");
$('.assetTypeCheckBox').attr('checked', true);
});
Cheers,
Ankit.
The Jquery .on works ok but I had some problems with the rendering implementing some of the solutions above. My problem using the .on is that somehow it was rendering the events differently than the .hover method.
Just fyi for anyone else that may also have the problem. I solved my problem by re-registering the hover event for the dynamically added item:
re-register the hover event because hover doesn't work for dynamically created items.
so every time i create the new/dynamic item i add the hover code again. works perfectly
$('#someID div:last').hover(
function() {
//...
},
function() {
//...
}
);
I'm working with tables adding new elements dynamically to them, and when using on(), the only way of making it works for me is using a non-dynamic parent as:
<table id="myTable">
<tr>
<td></td> // Dynamically created
<td></td> // Dynamically created
<td></td> // Dynamically created
</tr>
</table>
<input id="myButton" type="button" value="Push me!">
<script>
$('#myButton').click(function() {
$('#myTable tr').append('<td></td>');
});
$('#myTable').on('click', 'td', function() {
// Your amazing code here!
});
</script>
This is really useful because, to remove events bound with on(), you can use off(), and to use events once, you can use one().
I couldn't get live or delegate to work on a div in a lightbox (tinybox).
I used setTimeout successfullly, in the following simple way:
$('#displayContact').click(function() {
TINY.box.show({html:'<form><textarea id="contactText"></textarea><div id="contactSubmit">Submit</div></form>', close:true});
setTimeout(setContactClick, 1000);
})
function setContactClick() {
$('#contactSubmit').click(function() {
alert($('#contactText').val());
})
}
Also you can use onclick="do_something(this)"inside element
If you have a dinamically added link to some container or the body:
var newLink= $("<a></a>", {
"id": "approve-ctrl",
"href": "#approve",
"class": "status-ctrl",
"data-attributes": "DATA"
}).html("Its ok").appendTo(document.body);
you can take its raw javascript element and add an event listener to it, like the click:
newLink.get(0).addEventListener("click", doActionFunction);
No matter how many times you add this new link instance you can use it as if you where using a jquery click function.
function doActionFunction(e) {
e.preventDefault();
e.stopPropagation();
alert($(this).html());
}
So you will receive a message saying
Its ok
It has better performance than other alternatives.
Extra: You could gain better performance avoiding jquery and using plain javascript. If you are using IE up to version 8 you should use this polyfill to use the method addEventListener
if (typeof Element.prototype.addEventListener === 'undefined') {
Element.prototype.addEventListener = function (e, callback) {
e = 'on' + e;
return this.attachEvent(e, callback);
};
}
You CAN add on click to dynamically created elements. Example below. Using a When to make sure its done. In my example, i'm grabbing a div with the class expand, adding a "click to see more" span, then using that span to hide/show the original div.
$.when($(".expand").before("<span class='clickActivate'>Click to see more</span>")).then(function(){
$(".clickActivate").click(function(){
$(this).next().toggle();
})
});
Use 'on' as click gets bind to the elements already present.
For e.g
$('test').on('click',function(){
alert('Test');
})
This will help.
This question already has answers here:
Event binding on dynamically created elements?
(23 answers)
Closed 5 years ago.
<html>
<head>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript">
$(document).ready(function() {
$("button").click(function() {
$("h2").html("<p class='test'>click me</p>")
});
$(".test").click(function(){
alert();
});
});
</script>
</head>
<body>
<h2></h2>
<button>generate new element</button>
</body>
</html>
I was trying to generate a new tag with class name test in the <h2> by clicking the button. I also defined a click event associated with test. But the event doesn't work.
Can anyone help?
The click() binding you're using is called a "direct" binding which will only attach the handler to elements that already exist. It won't get bound to elements created in the future. To do that, you'll have to create a "delegated" binding by using on().
Delegated events have the advantage that they can process events from descendant elements that are added to the document at a later time.
Source
Here's what you're looking for:
var counter = 0;
$("button").click(function() {
$("h2").append("<p class='test'>click me " + (++counter) + "</p>")
});
// With on():
$("h2").on("click", "p.test", function(){
alert($(this).text());
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script>
<h2></h2>
<button>generate new element</button>
The above works for those using jQuery version 1.7+. If you're using an older version, refer to the previous answer below.
Previous Answer:
Try using live():
$("button").click(function(){
$("h2").html("<p class='test'>click me</p>")
});
$(".test").live('click', function(){
alert('you clicked me!');
});
Worked for me. Tried it with jsFiddle.
Or there's a new-fangled way of doing it with delegate():
$("h2").delegate("p", "click", function(){
alert('you clicked me again!');
});
An updated jsFiddle.
Use the .on() method with delegated events
$('#staticParent').on('click', '.dynamicElement', function() {
// Do something on an existent or future .dynamicElement
});
The .on() method allows you to delegate any desired event handler to:
current elements or future elements added to the DOM at a later time.
P.S: Don't use .live()! From jQuery 1.7+ the .live() method is deprecated.
Reason:
In jQuery, Click() event Direct binding which attaches the event handler to the element only if the particular element(Html code) exists on the page(after page loads).
Dynamic elements are created with the help of javascript or jquery(not in Html).
It won't consider the future elements(Dynamic) which are created after the page gets loaded.
So the normal click event won't fire on the dynamic element.
Solution :
To overcome this, we should use on() function. on() can delegate the event for both the current and future elements.
Delegated events have the advantage that can attach the handler to the elements which are being added to the document in the future.
Note : delegate(),live() and on() functions have the advantages over the DOM elements. As of JQuery 1.7 delegate() and live() are deprecated(Don't use these).
on() only Can delegate the event for both current and future elements.
So, Your code should be like this
Remove the code from $(document).ready:
$(".test").click(function(){
alert();
});
Change into:
$(document).on('click','.test',function(){
alert('Clicked');
});
Add this function in your js file.
It will work on every browser
$(function() {
$(document).on("click", '#mydiv', function() {
alert("You have just clicked on ");
});
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id='mydiv'>Div</div>
Change
$(".test").click(function(){
To
$(".test").live('click', function(){
LIVE DEMO
jQuery .live()
You need to use .live for this to work:
$(".test").live("click", function(){
alert();
});
or if you're using jquery 1.7+ use .on:
$(".test").on("click", "p", function(){
alert();
});
Try .live() or .delegate()
http://api.jquery.com/live/
http://api.jquery.com/delegate/
Your .test element was added after the .click() method, so it didn't have the event attached to it. Live and Delegate give that event trigger to parent elements which check their children, so anything added afterwards still works. I think Live will check the entire document body, while Delegate can be given to an element, so Delegate is more efficient.
More info:
http://www.alfajango.com/blog/the-difference-between-jquerys-bind-live-and-delegate/
I found two solutions at the jQuery's documentation:
First: Use delegate on Body or Document
E.g:
$("body").delegate('.test', 'click', function(){
...
alert('test');
});
Why?
Answer: Attach a handler to one or more events for all elements that match the selector, now or in the future, based on a specific set of root elements.
link: http://api.jquery.com/delegate/
Second: Put the your function at the "$( document )", using "on" and attach it to the element that you want to trigger this.
The first parameter is the "event handler", the second: the element and the third: the function.
E.g:
$( document ).on( 'click', '.test', function () {
...
alert('test');
});
Why?
Answer: Event handlers are bound only to the currently selected elements; they must exist on the page at the time your code makes the call to .on(). To ensure the elements are present and can be selected, perform event binding inside a document ready handler for elements that are in the HTML markup on the page. If new HTML is being injected into the page, select the elements and attach event handlers after the new HTML is placed into the page. Or, use delegated events to attach an event handler, as described next ...
link: https://api.jquery.com/on/
Best way to apply event on dynamically generated content by using delegation.
$(document).on("eventname","selector",function(){
// code goes here
});
so your code is like this now
$(document).on("click",".test",function(){
// code goes here
});
$(.surrounding_div_class).on( 'click', '.test', function () {
alert( 'WORKS!' );
});
Will only work if the DIV with the class .surrounding_div_class is the immediate parent to the object .test
If there is another object in the div that will be filled it wont work.
The problem you have is that you're attempting to bind the "test" class to the event before there is anything with a "test" class in the DOM. Although it may seem like this is all dynamic, what is really happening is JQuery makes a pass over the DOM and wires up the click event when the ready() function fired, which happens before you created the "Click Me" in your button event.
By adding the "test" Click event to the "button" click handler it will wire it up after the correct element exists in the DOM.
<script type="text/javascript">
$(document).ready(function(){
$("button").click(function(){
$("h2").html("<p class='test'>click me</p>")
$(".test").click(function(){
alert()
});
});
});
</script>
Using live() (as others have pointed out) is another way to do this but I felt it was also a good idea to point out the minor error in your JS code. What you wrote wasn't wrong, it just needed to be correctly scoped. Grasping how the DOM and JS works is one of the tricky things for many traditional developers to wrap their head around.
live() is a cleaner way to handle this and in most cases is the correct way to go. It essentially is watching the DOM and re-wiring things whenever the elements within it change.
An alternate and more succinct alternative (IMHO) is to use a raw javascript function that responds to an on click event, then pass the target element back to jQuery if you like. The advantage of this approach is that you can dynamically add your element anywhere, and the click handler will 'just work', and you need not concern yourself with delegating control to parent elements, and so on.
Step 1: Update the dynamic html to fire an onclick event. Be sure to pass the 'event' object as an argument
$("button").click(function() {
$("h2").html("<p class='test' onclick='test(event)'> click me </p>")
});
Step 2: Create the test function to respond to the click event
function test(e){
alert();
});
Optional Step 3: Given you are using jQuery I'm assuming it will be useful to get a reference back to the source button
function test(e){
alert();
// Get a reference to the button
// An explanation of this line is available here
var target = (e.target)? e.target : e.srcElement;
// Pass the button reference to jQuery to do jQuery magic
var $btn = $(target);
});
.live function works great.
It is for Dynamically added elements to the stage.
$('#selectAllAssetTypes').live('click', function(event){
alert("BUTTON CLICKED");
$('.assetTypeCheckBox').attr('checked', true);
});
Cheers,
Ankit.
The Jquery .on works ok but I had some problems with the rendering implementing some of the solutions above. My problem using the .on is that somehow it was rendering the events differently than the .hover method.
Just fyi for anyone else that may also have the problem. I solved my problem by re-registering the hover event for the dynamically added item:
re-register the hover event because hover doesn't work for dynamically created items.
so every time i create the new/dynamic item i add the hover code again. works perfectly
$('#someID div:last').hover(
function() {
//...
},
function() {
//...
}
);
I'm working with tables adding new elements dynamically to them, and when using on(), the only way of making it works for me is using a non-dynamic parent as:
<table id="myTable">
<tr>
<td></td> // Dynamically created
<td></td> // Dynamically created
<td></td> // Dynamically created
</tr>
</table>
<input id="myButton" type="button" value="Push me!">
<script>
$('#myButton').click(function() {
$('#myTable tr').append('<td></td>');
});
$('#myTable').on('click', 'td', function() {
// Your amazing code here!
});
</script>
This is really useful because, to remove events bound with on(), you can use off(), and to use events once, you can use one().
I couldn't get live or delegate to work on a div in a lightbox (tinybox).
I used setTimeout successfullly, in the following simple way:
$('#displayContact').click(function() {
TINY.box.show({html:'<form><textarea id="contactText"></textarea><div id="contactSubmit">Submit</div></form>', close:true});
setTimeout(setContactClick, 1000);
})
function setContactClick() {
$('#contactSubmit').click(function() {
alert($('#contactText').val());
})
}
Also you can use onclick="do_something(this)"inside element
If you have a dinamically added link to some container or the body:
var newLink= $("<a></a>", {
"id": "approve-ctrl",
"href": "#approve",
"class": "status-ctrl",
"data-attributes": "DATA"
}).html("Its ok").appendTo(document.body);
you can take its raw javascript element and add an event listener to it, like the click:
newLink.get(0).addEventListener("click", doActionFunction);
No matter how many times you add this new link instance you can use it as if you where using a jquery click function.
function doActionFunction(e) {
e.preventDefault();
e.stopPropagation();
alert($(this).html());
}
So you will receive a message saying
Its ok
It has better performance than other alternatives.
Extra: You could gain better performance avoiding jquery and using plain javascript. If you are using IE up to version 8 you should use this polyfill to use the method addEventListener
if (typeof Element.prototype.addEventListener === 'undefined') {
Element.prototype.addEventListener = function (e, callback) {
e = 'on' + e;
return this.attachEvent(e, callback);
};
}
You CAN add on click to dynamically created elements. Example below. Using a When to make sure its done. In my example, i'm grabbing a div with the class expand, adding a "click to see more" span, then using that span to hide/show the original div.
$.when($(".expand").before("<span class='clickActivate'>Click to see more</span>")).then(function(){
$(".clickActivate").click(function(){
$(this).next().toggle();
})
});
Use 'on' as click gets bind to the elements already present.
For e.g
$('test').on('click',function(){
alert('Test');
})
This will help.
I am trying to use SimpleBox jQuery plug-in on my website. I have the code such that everytime the user clicks on a div of class "link", a SimpleBox is invoked.
I also have another button that uses javascript to dynamically create divs of class "link" to my page. However, when I try to click these divs, the SimpleBox is not invoked.
<script type="text/javascript">
function createLinkDiv()
{
var parentDiv = document.getElementById ("right");
var linkDiv = document.createElement("div");
numDivs++;
linkDiv.setAttribute("class","link");
linkDiv.setAttribute("id",numDivs);
parentDiv.appendChild(linkDiv);
}
$().ready(function() {
$(".link").click(function(event) {
event.preventDefault();
$("#simplebox").simplebox();
});
$(".close_dialog").click(function() {
event.preventDefault();
$("#simplebox").simplebox('close');
});
});
</script>
Any idea why? Any help would be appreciated! Thanks!
For Dynamically added items use .live() or .delegate() to attach event handlers
$(".link").live("click",function(event) {
event.preventDefault();
$("#simplebox").simplebox();
});
Or
$("#right").delegate(".link","click",function(event) {
event.preventDefault();
$("#simplebox").simplebox();
});
Out of context
I suppose you've placed the the createLinkDiv function since you're calling it through inline javascript. Calling functions via inline javascript is a bit of out of fashion these days. Binding those events in code helps to keep your javascipt code easily maintainable.
$("#createLink").click(function(){
$('<div/>').attr({"class":"link","id":"link_" + $(".link").size() })
//Id shouldn't start with a number (not in HTML5)
.click(linkClick)
//Now you don't have to use live
.appendTo("#right");
});
As a side note, the $().ready() syntax is deprecated; it's better to use $(document).ready or just call $ with a function as a parameter.
To answer your main question, the .click method only binds to elements that exist when it's called. So when you add elements to the DOM later, you're not launching the simplebox on click because the handler hasn't been bound. You could either use .delegate to attach event handlers, or you could add the onclick directly in the creation of the DOM element.
The accepted answer is out of date now. The live() method has been removed from jQuery 1.9 and replaced with the on() method.
The syntax for on() is
$(element).on(event, selector, handler)
So in #jnfr's case, one of his handlers could be re-written as
$(document).on("click",".link",function(event) {
event.preventDefault();
$("#simplebox").simplebox();
});
Hopefully this will be of use to anyone arriving here and getting errors when using live().