I have 2 node.js webservers. I cache data inside webservers. I sync the cache load/clear based on system time. I have done time sync of all my hosts.
Now I clear cache every 15 mins using following code:
millisTillNexthour = "Calculate millis remaining until next hour"
setTimeout(function() {
setInterval(function() {
cache.clear();
}, 60000*15);
}, millisTillNexthour);
My expectation is even if this process runs for ever, cache will be cleared every 15th minute of each hour of the day.
My question is: can setInterval drift over time?
For eg: right now it clears cache at 10:00 10:15 10:30 10:45 11:00 ......
Can it happen that instead of 10:15 system time, setInterval gets executed at 10:20 system time when it was supposed to clear cache at 10:15??
I am not sure how this works. Please shed some light. I hope I explained my question well.
I'm probably more than a bit late to the party here, but this is how I solved this particular time-slipping problem just now, using a recursively called setTimeout() function instead of using setInterval().
var interval = 5000;
var adjustedInterval = interval;
var expectedCycleTime = 0;
function runAtInterval(){
// get timestamp at very start of function call
var now = Date.now();
// log with time to show interval
console.log(new Date().toISOString().replace(/T/, ' ').replace(/Z/, '') + " runAtInterval()");
// set next expectedCycleTime and adjustedInterval
if (expectedCycleTime == 0){
expectedCycleTime = now + interval;
}
else {
adjustedInterval = interval - (now - expectedCycleTime);
expectedCycleTime += interval;
}
// function calls itself after delay of adjustedInterval
setTimeout(function () {
runAtInterval();
}, adjustedInterval);
}
On each iteration, the function checks the actual execution time against the previously calculated expected time, and then deducts the difference from 'interval' to produce 'adjustedInterval'. This difference may be positive or negative, and the results show that actual execution times tend to oscillate around the 'true' value +/- ~5ms.
Either way, if you've got a task that is executing once a minute, and you run it for an entire day, using this function you can expect that - for the entire day - every single hour will have had 60 iterations happen. You won't have that occasional hour where you only got 59 results because eventually an entire minute had slipped.
setInterval is definitely drifting (although I agree that it should not be). I'm running a Node.js server with an interval of 30 seconds. On each tick, a few async web requests are made which from beginning to end take roughly 1 second. No other user-level/application processing happens in the intervening 29 seconds.
However, I notice from my server logs that over the course of 30 minutes, a drift of 100ms occurs. Of course, the underlying operating system is not to blame for the drift and it can only be some defect of Node.js's design or implementation.
I am very disappointed to notice that there is a bug in the NodeJS implementation of setInterval. Please take a look at here:
https://github.com/nodejs/node/issues/7346#issuecomment-300432730
You can use Date() object to set specific time and then add a certain number of milliseconds to the date.
It definitly can because of how Javascript works (See Event Loop)
Javascript event loop executes the setInterval queue when other queued events are finished. These events will take some time and it will effect your setInterval function's execute time and it will eventually drift away as time passes.
setInterval should not drift in a perfect world. It might be delayed due to other things taking up system resources. If you need a more precise solution to what you have, use the clock() function to " calibrate " your nodes.
I am trying to display several count down timers on same page. now as far as i know there are 2 ways of doing it without using jquery plugins or some other scripts (if you know of a good one please let me know)
starting 1 sec setInterval and a global variable that will contain milliseconds and then just reduce -1000 every interval.
creating a function that reduce 1 sec from a global variable and then at the bottom of that function setting a setTimeout of 1 sec that will run that functions so basically recursion every 1 sec.
My question is which of the 2 options will work better and/or faster?
here is demonstrative code for both:
setInterval:
var amount_of_seconds_left = 46800000;
setInterval(function(){
if(amount_of_seconds_left > 1000){
amount_of_seconds_left -= 1000;
}
},1000);
setTimeout:
var amount_of_seconds_left = 46800000;
function startTime(){
if(amount_of_seconds_left > 1000){
amount_of_seconds_left -= 1000;
t=setTimeout(function(){startTime()},1000);
}
}
Both ways could work but i was wondering performance wise which is better and is performance is even an issue with this ?
setInterval and setTimeout don't start after 1000ms e.g. if another script is running, so both can cause delays. It would be better to use the setIntervall to call the display update only and use the the Date object to calculate the exactly remaining time. E.g. after the browser was busy the timer shows the correct time after the next update.
Here an example:
HTML:
<div id="timer1"></div>
<div id="timer2"></div>
javascript:
// update all timer
function updateTimer() {
for (var i in aTimer) {
var oTimer = document.getElementById(aTimer[i].sId);
var iSeconds = parseInt((aTimer[i].iFinished - Date.now()) / 1000);
oTimer.innerHTML = iSeconds;
}
}
// Init all timers with DOM-id and finish time
var aTimer = [
{ sId: 'timer1', iFinished: Date.now() + 46800000 },
{ sId: 'timer2', iFinished: Date.now() + 780000}
];
// call display update
setInterval(function() {
updateTimer();
}, 333);
I belive that the setInterval code executes every 1000ms exactly, while the setTimeout waits 1000ms, runs the function, which takes some ms, then sets another timeout. So the wait period is actually greater than 1000ms.
From this post:
setTimeout or setInterval?
In a javascript code I develop, some function should be called every 1 second. But to be sure that this operation takes place every 1 second, the following code is utilized:
setInterval(doIt, 500);
function doIt() {
var now = (new Date()).getTime();
if(lastUpdate + 1000 >= now) {
/// code...
lastUpdate = now;
}
}
As far as I know setInterval(doIt, 1000) doesn't always mean that it's called every one second.
Is the above solution is a valid one? If not, what do you recommend?
You could use setTimeout instead of setInterval, and make dynamic adjustments each time your function is called. The idea is to set the timeout for a number of milliseconds sufficient to carry you to the next second boundary.
function timeoutFunc() {
// do interesting things
var time = new Date().getTime();
setTimeout(timeoutFunc, 1000 - time % 1000);
}
You'd start it off with:
setTimeout(timeoutFunc, 1000 - new Date().getTime() % 1000);
Synchronizing with the server seems like a bad idea, because you have no way of knowing whether the client clock is synchronized to anything (like the NTP server network). If it's not, then you server synchronizations are going to make things look wrong at the client, because the client clock will always be what seems right.
well setInterval IS defined in milliseconds. so it means its called every X millisdconds.
however the system can freeze or something like that!
but theres no practical better solution, you approach is fine.
if you really have an extensive javascript client application the results could stretch a little bit.
a possible solution for that is to get the system time and have a counter in your function. then ever X executions you align with the system clock, calculate how many function calls you should have until now and speed up the interval or slow it down.
this is as far as you can get to perfection. but it will be only a matter of milliseconds and probably not worth the effort.
may i ask what you are developing?
As far as I can tell, these two pieces of javascript behave the same way:
Option A:
function myTimeoutFunction()
{
doStuff();
setTimeout(myTimeoutFunction, 1000);
}
myTimeoutFunction();
Option B:
function myTimeoutFunction()
{
doStuff();
}
myTimeoutFunction();
setInterval(myTimeoutFunction, 1000);
Is there any difference between using setTimeout and setInterval?
They essentially try to do the same thing, but the setInterval approach will be more accurate than the setTimeout approach, since setTimeout waits 1000ms, runs the function and then sets another timeout. So the wait period is actually a bit more than 1000ms (or a lot more if your function takes a long time to execute).
Although one might think that setInterval will execute exactly every 1000ms, it is important to note that setInterval will also delay, since JavaScript isn't a multi-threaded language, which means that - if there are other parts of the script running - the interval will have to wait for that to finish.
In this Fiddle, you can clearly see that the timeout will fall behind, while the interval is almost all the time at almost 1 call/second (which the script is trying to do). If you change the speed variable at the top to something small like 20 (meaning it will try to run 50 times per second), the interval will never quite reach an average of 50 iterations per second.
The delay is almost always negligible, but if you're programming something really precise, you should go for a self-adjusting timer (which essentially is a timeout-based timer that constantly adjusts itself for the delay it's created)
Is there any difference?
Yes. A Timeout executes a certain amount of time after setTimeout() is called; an Interval executes a certain amount of time after the previous interval fired.
You will notice the difference if your doStuff() function takes a while to execute. For example, if we represent a call to setTimeout/setInterval with ., a firing of the timeout/interval with * and JavaScript code execution with [-----], the timelines look like:
Timeout:
. * . * . * . * .
[--] [--] [--] [--]
Interval:
. * * * * * *
[--] [--] [--] [--] [--] [--]
The next complication is if an interval fires whilst JavaScript is already busy doing something (such as handling a previous interval). In this case, the interval is remembered, and happens as soon as the previous handler finishes and returns control to the browser. So for example for a doStuff() process that is sometimes short ([-]) and sometimes long ([-----]):
. * * • * • * *
[-] [-----][-][-----][-][-] [-]
• represents an interval firing that couldn't execute its code straight away, and was made pending instead.
So intervals try to ‘catch up’ to get back on schedule. But, they don't queue one on top of each other: there can only ever be one execution pending per interval. (If they all queued up, the browser would be left with an ever-expanding list of outstanding executions!)
. * • • x • • x
[------][------][------][------]
x represents an interval firing that couldn't execute or be made pending, so instead was discarded.
If your doStuff() function habitually takes longer to execute than the interval that is set for it, the browser will eat 100% CPU trying to service it, and may become less responsive.
Which do you use and why?
Chained-Timeout gives a guaranteed slot of free time to the browser; Interval tries to ensure the function it is running executes as close as possible to its scheduled times, at the expense of browser UI availability.
I would consider an interval for one-off animations I wanted to be as smooth as possible, whilst chained timeouts are more polite for ongoing animations that would take place all the time whilst the page is loaded. For less demanding uses (such as a trivial updater firing every 30 seconds or something), you can safely use either.
In terms of browser compatibility, setTimeout predates setInterval, but all browsers you will meet today support both. The last straggler for many years was IE Mobile in WinMo <6.5, but hopefully that too is now behind us.
setInterval()
setInterval() is a time interval based code execution method that has the native ability to repeatedly run a specified script when the interval is reached. It should not be nested into its callback function by the script author to make it loop, since it loops by default. It will keep firing at the interval unless you call clearInterval().
If you want to loop code for animations or on a clock tick, then use setInterval().
function doStuff() {
alert("run your code here when time interval is reached");
}
var myTimer = setInterval(doStuff, 5000);
setTimeout()
setTimeout() is a time based code execution method that will execute a script only one time when the interval is reached. It will not repeat again unless you gear it to loop the script by nesting the setTimeout() object inside of the function it calls to run. If geared to loop, it will keep firing at the interval unless you call clearTimeout().
function doStuff() {
alert("run your code here when time interval is reached");
}
var myTimer = setTimeout(doStuff, 5000);
If you want something to happen one time after a specified period of time, then use setTimeout(). That is because it only executes one time when the specified interval is reached.
The setInterval makes it easier to cancel future execution of your code. If you use setTimeout, you must keep track of the timer id in case you wish to cancel it later on.
var timerId = null;
function myTimeoutFunction()
{
doStuff();
timerId = setTimeout(myTimeoutFunction, 1000);
}
myTimeoutFunction();
// later on...
clearTimeout(timerId);
versus
function myTimeoutFunction()
{
doStuff();
}
myTimeoutFunction();
var timerId = setInterval(myTimeoutFunction, 1000);
// later on...
clearInterval(timerId);
I find the setTimeout method easier to use if you want to cancel the timeout:
function myTimeoutFunction() {
doStuff();
if (stillrunning) {
setTimeout(myTimeoutFunction, 1000);
}
}
myTimeoutFunction();
Also, if something would go wrong in the function it will just stop repeating at the first time error, instead of repeating the error every second.
The very difference is in their purposes.
setInterval()
-> executes a function, over and over again, at specified time intervals
setTimeout()
-> executes a function, once, after waiting a specified number of milliseconds
It's as simple as that
More elaborate details here http://javascript.info/tutorial/settimeout-setinterval
When you run some function inside setInterval, which works more time than timeout-> the browser will be stuck.
- E.g., doStuff() takes 1500 sec. to be execute and you do: setInterval(doStuff, 1000);
1) Browser run doStuff() which takes 1.5 sec. to be executed;
2) After ~1 second it tries to run doStuff() again. But previous doStuff() is still executed-> so browser adds this run to the queue (to run after first is done).
3,4,..) The same adding to the queue of execution for next iterations, but doStuff() from previous are still in progress...
As the result- the browser is stuck.
To prevent this behavior, the best way is to run setTimeout inside setTimeout to emulate setInterval.
To correct timeouts between setTimeout calls, you can use self-correcting alternative to JavaScript's setInterval technique.
Your code will have different execution intevals, and in some projects, such as online games it's not acceptable. First, what should you do, to make your code work with same intevals, you should change "myTimeoutFunction" to this:
function myTimeoutFunction()
{
setTimeout(myTimeoutFunction, 1000);
doStuff();
}
myTimeoutFunction()
After this change, it will be equal to
function myTimeoutFunction()
{
doStuff();
}
myTimeoutFunction();
setInterval(myTimeoutFunction, 1000);
But, you will still have not stable result, because JS is single-threaded. For now, if JS thread will be busy with something, it will not be able to execute your callback function, and execution will be postponed for 2-3 msec. Is you have 60 executions per second, and each time you have random 1-3 sec delay, it will be absolutely not acceptable (after one minute it will be around 7200 msec delay), and I can advice to use something like this:
function Timer(clb, timeout) {
this.clb = clb;
this.timeout = timeout;
this.stopTimeout = null;
this.precision = -1;
}
Timer.prototype.start = function() {
var me = this;
var now = new Date();
if(me.precision === -1) {
me.precision = now.getTime();
}
me.stopTimeout = setTimeout(function(){
me.start()
}, me.precision - now.getTime() + me.timeout);
me.precision += me.timeout;
me.clb();
};
Timer.prototype.stop = function() {
clearTimeout(this.stopTimeout);
this.precision = -1;
};
function myTimeoutFunction()
{
doStuff();
}
var timer = new Timer(myTimeoutFunction, 1000);
timer.start();
This code will guarantee stable execution period. Even thread will be busy, and your code will be executed after 1005 mseconds, next time it will have timeout for 995 msec, and result will be stable.
I use setTimeout.
Apparently the difference is setTimeout calls the method once, setInterval calls it repeatdly.
Here is a good article explaining the difference: Tutorial: JavaScript timers with setTimeout and setInterval
I've made simple test of setInterval(func, milisec), because I was curious what happens when function time consumption is greater than interval duration.
setInterval will generally schedule next iteration just after the start of the previous iteration, unless the function is still ongoing. If so, setInterval will wait, till the function ends. As soon as it happens, the function is immediately fired again - there is no waiting for next iteration according to schedule (as it would be under conditions without time exceeded function). There is also no situation with parallel iterations running.
I've tested this on Chrome v23. I hope it is deterministic implementation across all modern browsers.
window.setInterval(function(start) {
console.log('fired: ' + (new Date().getTime() - start));
wait();
}, 1000, new Date().getTime());
Console output:
fired: 1000 + ~2500 ajax call -.
fired: 3522 <------------------'
fired: 6032
fired: 8540
fired: 11048
The wait function is just a thread blocking helper - synchronous ajax call which takes exactly 2500 milliseconds of processing at the server side:
function wait() {
$.ajax({
url: "...",
async: false
});
}
Both setInterval and setTimeout return a timer id that you can use to cancel the execution, that is, before the timeouts are triggered. To cancel you call either clearInterval or clearTimeout like this:
var timeoutId = setTimeout(someFunction, 1000);
clearTimeout(timeoutId);
var intervalId = setInterval(someFunction, 1000),
clearInterval(intervalId);
Also, the timeouts are automatically cancelled when you leave the page or close the browser window.
To look at it a bit differently: setInterval ensures that a code is run at every given interval (i.e. 1000ms, or how much you specify) while setTimeout sets the time that it 'waits until' it runs the code. And since it takes extra milliseconds to run the code, it adds up to 1000ms and thus, setTimeout runs again at inexact times (over 1000ms).
For example, timers/countdowns are not done with setTimeout, they are done with setInterval, to ensure it does not delay and the code runs at the exact given interval.
You can validate bobince answer by yourself when you run the following javascript or check this JSFiddle
<div id="timeout"></div>
<div id="interval"></div>
var timeout = 0;
var interval = 0;
function doTimeout(){
$('#timeout').html(timeout);
timeout++;
setTimeout(doTimeout, 1);
}
function doInterval(){
$('#interval').html(interval);
interval++;
}
$(function(){
doTimeout();
doInterval();
setInterval(doInterval, 1);
});
Well, setTimeout is better in one situation, as I have just learned. I always use setInterval, which i have left to run in the background for more than half an hour. When i switched back to that tab, the slideshow (on which the code was used) was changing very rapidly, instead of every 5 seconds that it should have. It does in fact happen again as i test it more and whether it's the browser's fault or not isn't important, because with setTimeout that situation is completely impossible.
The difference is obvious in console:
Just adding onto what has already been said but the setTimeout version of the code will also reach the Maximum call stack size which will stop it from functioning. Since there is no base case for the recursive function to stop at so you can't have it run forever.
If you set the interval in setInterval too short, it may fire before the previous call to the function has been completed. I ran into this problem with a recent browser (Firefox 78). It resulted in the garbage collection not being able to free memory fast enough and built up a huge memory leak.
Using setTimeout(function, 500); gave the garbage collection enough time to clean up and keep the memory stable over time.
Serg Hospodarets mentioned the problem in his answer and I fully agree with his remarks, but he didn't include the memory leak/garbage collection-problem. I experienced some freezing, too, but the memory usage ran up to 4 GB in no time for some minuscule task, which was the real bummer for me. Thus, I think this answer is still beneficial to others in my situation. I would have put it in a comment, but lack the reputation to do so. I hope you don't mind.
The reason why Option A and Option B seem like they work the same is mostly because the places of the setInterval and the setTimeout functions.
function myTimeoutFunction()
{
doStuff();
setTimeout(myTimeoutFunction, 1000);
}
myTimeoutFunction();
This one is a recursive function, and if doStuff is very complex, setTimeout has to keep track of all calls of the setTimout plus the current doStuff, which makes it become slower and s l o w e r.
function myTimeoutFunction()
{
doStuff();
}
myTimeoutFunction();
setInterval(myTimeoutFunction, 1000);
On the other hand, the setInterval only has to keep track of the last setInterval and the current doStuff, making it staying at a constant speed.
So which one should you use?
From the above, you should probably be able to conclude that the better one is setInterval.
The important point to consider is the performance.
The only way to run a function periodically using setTimeout is to call it recursively with the target function, and when you check it, it appears that it works asynchronously put when you see the call stack you will find it keep growing by the time. In fact, it is sensible. Since Javascript does not support multi-threading, it is impossible to finish calling the parent function before finishing the child function, therefor, the stack will keep growing as long as there is recursive calling.
Whilst, with setInterval we don't need to call the target function recursively since it has a logic that runs it periodically as a loop. So, this keeps the call stack clean.
You can watch the call stack using developer's tools in your browser and you will notice the difference.
The difference will be clear when using small interval for a long period of time.
I think SetInterval and SetTimeout are different. SetInterval executes the block according to the time set while, SetTimeout executes the block of code once.
Try these set of codes after the timeout countdown seconds:
setInterval(function(e){
alert('Ugbana Kelvin');
}, 2000);
and then try
setTimeout(function(e){
alert('Ugbana Kelvin');
}, 2000);
You can see the differences for yourself.