I wanted to load some fragments of external content inside a div, through a menu.
Found "load" and "live", found a tutorial used it = success!
Except, like what's explicit in the documentation, it doesn't load JavaScript.
The thing is, the destination page already loads, inside the header, that same JavaScript, 'cause Wordpress loads it in every page. In this particular page, I'm only using the plugin (nextgen gallery) through the jQuery AJAX call.
So, what I believe is my problem is that I somehow need to alert/reload the JavaScript, right?
And how can I do this?
<script type="text/javascript" charset="utf-8">
jQuery(document).ready(function(){
// ajax pagination
jQuery('#naveg a').live('click', function(){ // if not using wp-page-numbers, change this to correct ID
var link = jQuery(this).attr('href');
// #main is the ID of the outer div wrapping your posts
jQuery('#fora').html('<div class="loading"><h2>Loading...</h2></div>');
// #entries is the ID of the inner div wrapping your posts
jQuery('#fora').load(link+' #dentro')
return false;
});
}); // end ready function
</script>
PS: I've substituted "live" with "on" but didn't work either.
I'm not sure if I understand... your load() command is puling in some Javascript that you want executed? I'm not sure if you can do that. But if you just need to call some JS upon load() completion, you can pass it a function like so:
jQuery('#fora').load(link+' #dentro', function() {
console.log("load completed");
// JS code to be executed...
});
If you want to execute Javascript code included in the loaded page (the page you retrieve via .load()), than you have to use the url-parameter without the "suffixed selector expression". See jQuery documentation for (.load()):
Note: When calling .load() using a URL without a suffixed selector expression, the content is passed to .html() prior to scripts being
removed. This executes the script blocks before they are discarded. If
.load() is however called with a selector expression appended to the
URL, the scripts are stripped out prior to the DOM being updated,
which is why they are never executed. An example of both cases can be
seen below:
Here, any JavaScript loaded into #a as a part of the document will
successfully execute.
$('#a').load('article.html');
However in this case, script blocks in the document being loaded into
#b are stripped out prior to being executed:
$('#b').load('article.html #target');
I think that's your problem (although I have no solution for you, sorry).
Proposal: Maybe you can load the whole page (including the Scripts) and remove (or hide) the parts you don't need?
Cheers.
Related
is there a better way to replace this kind of js function by simply collapse/toggle a div and show/hide its content?
$(function() {
$('#destselect').change(function(){
$('.dest').hide();
$('#' + $(this).val()).show();
});
});
The reason this is happening is because your js file is called on the head of your page.
Because of this, when you document.getElementsByClassName('collapsible');, colls result in an empty array, as your elements in body are not yet created.
You could either create a separate js file and add it at the end of your body (in that way you make sure your colls are created when your javascript is executed), or just wrap your code on a DOMContentLoaded event listener that will trigger your code once the document has completely loaded.
My guess would be that you are loading your script before browser finishes loading dom conetent and so when it runs the elements it is trying to add event listeners to, don't yet exist.
Try wrapping all you javascript in that file in this:
document.addEventListener("DOMContentLoaded", function(event) {
// all your code goes here
});
The above makes sure that your script is run after loading all elements on the page.
You could add a script tag to the header of your HTML file, this will import the JS file into your current page as follows
<script src="File1.js" type="text/javascript"></script>
Then call the function either in onclick in a button or in another script (usually at the bottom) of your page. Something like this:
<body>
...
<script type="text/javascript">
functionFromFile1()
</script>
</body>
Seems like your script is not executing properly due to a missing variable.
In this script https://www.argentina-fly.com/js/scripts.js
Naves variable in function UpdateDetailsDestination() is not defined.
I think you should resolve this first and then check your further code is working on not.
Please take a look into Console when running page. You'll see all JavaScript related errors there.
I have a javascript function, "loadFramework()" that modifies an HTML document. Specifically, it repeatedly runs the jQuery command $("#element-id").load("document/name.html"), which injects the HTML in document/name.html directly into the element with #element-id.
Originally, I ran loadFramework() in a script in the document's header. However, since then I've realized that the function fails if the page has not loaded yet, since it relies on there being an element with #element-id.
I can't figure out how to get this function to run when it should. A simple solution seemed to be setting it to be the document.onload function:
document.onload = function() {
loadFramework();
}
But in this case it never seems to run at all.
How do I make sure a header function runs only after the document has loaded?
You should use window.onload if you are looking for a vanilla JS option
window.onload = function() {
loadFramework();
}
Jquery load takes additional argument "complete". You can run the javascript there. So the code would be:
$("#element-id").load("document/name.html", function(){
loadFramework();
});
You can also use $(document).ready(function{loadFramework()}) inside the html you are loading.
If you want to execute the loadFramework() method after "document/name.html" is loaded, I would suggest the following code.
$(function() {
$("#element-id").load("document/name.html", function(){
loadFramework();
});
});
I have a shadowbox script. When I load the page everything works fine, but when I call this jquery load function and then try to trigger the shadowbox by clicking on the image, the large image opens in new window instead.
Here's the code:
<link href="CSS/main.css" rel="stylesheet" type="text/css" />
<script type="text/javascript" src="shadowbox-3.0.3/shadowbox.js"></script>
<script type="text/javascript">
Shadowbox.init();
</script>
<p id="compas"></p>
Any idea why this is happening?
EDIT
So, we finally get the bottom of this. 15 hours after first commenting on this issue, and at least 50 iterations later, we finally have identified what the problem is and how to fix it.
It actually struck me suddenly when I was creating local aaa.html and bbb.html on my server. That was when it hit me that the element nodes for the content that was being replaced was being removed altogether from the DOM when $.load() runs the callback function. So, once the #menu-home content elements were replaced, they were removed from the DOM and no longer had Shadowbox applied to them.
Once I figured this out, it was just a matter of a single web search and I found:
Nabble-Shadowbox - Reinit Shadowbox
Specifically, the response from mjijackson. What he describes is how to "restart" (reinitialize) Shadowbox using:
Shadowbox.clearCache();
Shadowbox.setup();
So once the #menu-home content was reloaded, what needs to happen is the Shadowbox cache needs to be cleared (essentially, shutting it down on the page), then the Shadowbox.setup() is run, which will detect the elements all over again. You don't run the Shadowbox.init() method again either.
I noticed that you had tried to copy/paste the Shadowbox.setup() in after the $.load(), at least sequentially in the code. However, this wasn't going to work, due to the cache clearing that needs to happen first, and primarily because the .clearCache() and .setup() functions need to be run after the $.load() completes (finishes and runs any callbacks). Those two functions need to be run in the $.load() callback handler; otherwise, you're running it's immediately, but the $.load() is asynchronous and will complete at some later time.
I'm going to go over some other changes I made, just so you understand what, why and wherefore.
Note, I'm not sure if you're familiar with <base>, but the following is at the top of the HEAD element:
<base href="http://62.162.170.125/"/>
This just let's me use the resource files on your computer. You'll not want to use this on your actual site more than likely. If you copy/paste, make sure and remove this line.
<div id="menu">
<ul>
<li><a id="menu-home" href="index.html" rel="http://jfcoder.com/test/homecontent.html">Home</a></li>
<li><a id="menu-services" href="services.html" rel="http://jfcoder.com/test/servicescontent.html">Services</a></li>
<li><a id="menu-tour" href="tour.html" rel="http://jfcoder.com/test/tourcontent.html">Tour</a></li>
<li><a id="menulogin" href="login.html">Login</a></li>
</ul>
</div>
Here, you'll notice I have a relative url in the HREF attribute, and a link to some pages on my server. The reason for the links to my server is that I couldn't access your aaa.html and bbb.html files through AJAX due to cross-site scripting limitations. The links to my website should be removed as well.
Now, the reason I'm using the rel attribute here is that I want allow for the links by way of the href attribute to continue to work in case the JS doesn't function correctly or there's some other error. If you have separate files, one for full HTML document and another for just the fragments, this is what you'll want to do. If you can serve both the full document AND the content-only from the linked file, then you probably don't need the rel attribute, but you'll need to manage the request so the server knows how to respond (full document or just the content part).
var boxInitialize = function(){
try {
if (!Shadowbox.initialized) {
Shadowbox.init();
Shadowbox.initialized = true;
} else {
Shadowbox.clearCache();
Shadowbox.setup();
}
} catch(e) {
try {
Shadowbox.init();
} catch(e) {};
}
};
All I've done here is create a central location for the initialization/setup requests. Fairly straightforward. Note, I added the Shadowbox.initialized property so I could keep track of if the Shadowbox.init() had run, which can only be run once. However, keeping it all in one spot is a good idea if possible.
I also created a variable function which can be called either as a regular function:
boxInitialize();
Or as a function reference:
window.onload = boxInitialize; // Note, no () at the end, which execute the function
You'll probably notice I removed the $() and replaced them with jQuery() instead. This can turn into a real nightmare if you end up with an environment with multiple frameworks and libraries competing for $(), so it's best to avoid it. This actually just bit me real good the other day.
Since we have a closure scope within the .ready() callback, we can take advantage of that to save several "private" variables for ow use at different times in the scripts execution.
var $ = jQuery,
$content = jQuery("#content"), // This is "caching" the jQuery selected result
view = '',
detectcachedview = '',
$fragment,
s = Object.prototype.toString,
init;
Note the , at the end of all but the last line. See how I "imported" the $ by making it equal to the jQuery variable, which means you could actually use it in that#.
var loadCallback = function(response, status, xhr){
if (init != '' && s.call(init) == '[object Function]') {
boxInitialize();
}
if (xhr.success()
&& view != ''
&& typeof view == 'string'
&& view.length > 1) {
$fragment = $content.clone(true, true);
cacheContent(view, $fragment);
}
};
This runs when the $.load() completes the process of the AJAX request. Note, the content returned in the request has already been placed on the DOM by the time this runs. Note as well that we're storing the actual cached content in the $content.data(), which should never be removed from the page; only the content underneath it.
var cacheContent = function(key, $data){
if (typeof key == 'string'
&& key.length > 1
&& $data instanceof jQuery) {
$content.data(key, $data.html());
$content.data(detectcachedview, true);
}
};
cacheContent() is one a method you may not want; essentially, if it was already loaded on a previous request, then it will be cached and then directly retrieved instead of initiating another $.load() to get the content from the server. You may not want to do this; if so, just comment out the second if block in the menuLoadContent() function.
var setContent = function(html){
$content.empty().html(html);
if (init != '' && s.call(init) == '[object Function]') {
boxInitialize();
}
};
What this does is first empty the $content element of it's contents/elements, then add the specified string-based markup that we saved earlier by getting the $content.html(). This is what we'll re-add when possible; you can see once the different links have been clicked and loaded, reclicking to get that to redisplay is really quick. Also, if it's the same request as currently loaded, it also will skip running the code altogether.
(We use $content like because it is a reference to a variable containing a jQuery element. I am doing this because it's in a closure-scope, which means it doesn't show up in the global scope, but will be available for things like event handlers.
Look for the inline comments in the code.
var menuLoadContent = function(){
// This is where I cancel the request; we're going to show the same thing
// again, so why not just cancel?
if (view == this.id || !this.rel) {
return false;
}
// I use this in setContent() and loadCallback() functions to detect if
// the Shadowbox needs to be cleared and re-setup. This and code below
// resolve the issue you were having with the compass functionality.
init = this.id == 'menu-home' ? boxInitialize : '';
view = this.id;
detectcachedview = "__" + view;
// This is what blocks the superfluous $.load() calls for content that's
// already been cached.
if ($content.data(detectcachedview) === true) {
setContent($content.data(view));
return false;
}
// Now I have this in two different spots; there's also one up in
// loadCallback(). Why? Because I want to cache the content that
// loaded on the initial page view, so if you try to go back to
// it, you'll just pickup what was sent with the full document.
// Also note I'm cloning $content, and then get it's .html()
// in cacheContent().
$fragment = $content.clone(true, true);
cacheContent(view, $fragment);
// See how I use the loadCallback as a function reference, and omit
// the () so it's not called immediately?
$content.load(this.rel, loadCallback);
// These return false's in this function block the link from navigating
// to it's href URL.
return false;
};
Now, I select the relevant menu items differently. You don't need a separate $.click() declaration for each element; instead, I select the #menu a[rel], which will get each a element in the menu that has a rel="not empty rel attribute". Again, note how I use menuLoadContent here as a function reference.
jQuery("#menu a[rel]").click(menuLoadContent);
Then, at the very bottom, I run the boxInitialize(); to setup Shadowbox.
Let me know if you have any questions.
I think I might be getting to the bottom of this. I think the flaw is the way you're handling the $.load() of the new content when clicking a menu item, coupled with an uncaught exception I saw having to do with an iframe:
Uncaught exception: Unknown player iframe
This Nabble-Shadowbox forum thread deals with this error. I'm actually not getting that anymore, however I think it came up with I clicked on the tour menu item.
Now, what you're doing to load the content for the menu items really doesn't make any sense. You're requesting an entire HTML document, and then selecting just an element with a class="content". The only benefit I can see for doing this is that the page never reloads, but you need to take another approach to how to get and display the data that doesn't involve downloading the entire page through AJAX and then trying to get jQuery to parse out just the part you want.
I believe handling the content loading this way is the root cause of your problem, hence the $.load() toggling of menu views breaks your page in unexpected ways.
Question: Why don't you just link to the actual page and skip all the $.load() fanciness? Speed-wise, it won't make that much of an impact, if any at all. It just doesn't make sense to use AJAX like this, when you could just link them to the same content without issue.
There are two alternatives that would allow you to prevent roundtrip page reloads:
Setup your AJAX calls to only request the .content portion of the markup if you have the ?contentonly=true flag in the URL, not the entire HTML document. This is how it's traditionally done, and is usually relative simple to do if you have a scripting environment.
$(".content").load('index.html?contentonly=true');
Then your server responds only with the content view requested.
Serve all of the content views within the same HTML document, then show as appropriate:
var $content = $('.content');
$content.find('.content-view').hide();
$content.find('#services-content').show();
It doesn't look like you have a whole lot of content to provide, so the initial page load probably won't have that much of an impact with this particular approach. You might have to look into how to preload images, but that's a very well known technique with many quality scripts and tutorials out there.
Either one of these techniques could use the #! (hashbang) technique to load content, although I believe there are some issues with this for search engines. However, here is a link to a simple technique I put together some time ago:
http://jfcoder.com/test/hash.html
Also, this is just a tip, but don't refer to your "content" element with a class, ie, .content. There should only be one content-displaying element in the markup, right? There's not more than one? Use an id="content"; that's what ID attributes are for, to reference a single element. classes are meant to group elements by some characteristic they share, so above when I .hide() the inline content views (see #2), I look for all of the class="content-view" elements, which are all similar (they contain content view markup). But the $content variable should refer to $('#content');. This is descriptive of what the elements are.
This worked for us, we made a site that used vertical tabs and called in the pages with our shadowbox images using jQuery.load
Just give all of your anchor tags the class="sbox" and paste this script in the header.
<script>
Shadowbox.init({
skipSetup:true,
});
$(document).ready(function() {
Shadowbox.setup($('.sbox'));//set up links with class of sbox
$('a.sbox').live('click',function(e){
Shadowbox.open(this);
//Stops loading link
e.preventDefault();
});
});
</script>
Note: we had to put the .sbox class on all our rel="shadowbox" anchors as well as the on the anchor for the tab that called the .load
Thanks to this guy-> http://www.webmuse.co.uk/blog/shadowbox-ajax-and-other-generated-content-with-jquery-and-javascript/
Well, based on Shem's answer, this is my solution.
Every click on specific class, setup and open shadowbox with elements from same class:
jQuery('.sb-gallery a').live('click',function(e){
Shadowbox.setup(jQuery('.sb-gallery a'));
Shadowbox.open(this);
//Stops loading link
e.preventDefault();
});
Thanks to all
I would like to refire the styling and processing.js scripts that i linked to in the head so that they display correctly when brought in through an ajax-request. I see where in the ajax request this code needs to be, but i don't know how to tell the code to simply reapply the script. I've seen people using getScript() to do this, but from what i can tell this reloads the script, rather than simply telling it repeat or refire. Do all of the scripts need their own reinitialization? I found the syntax highlighters .highlight() method, but i am yet to get the processing script to load. currently, Processing.loadSketchFromSources($('#processing'), ['mysketch.pde']); does not work. I am using current versions of all libraries. Surprised i haven't been able to find the answer yet, as a lot of people seem to have the same problem. Thanks for your help!
index page:
$(document).ready(function () {
// put all your jQuery here.
//Check if url hash value exists (for bookmark)
$.history.init(pageload);
//highlight the selected link
$('a[href=' + document.location.hash + ']').addClass('selected');
//Search for link with REL set to ajax
$('a[rel=ajax]').live("click",function(){
//grab the full url
var hash = this.href;
//remove the # value
hash = hash.replace(/^.*#/, '');
//for back button
$.history.load(hash);
//clear the selected class and add the class class to the selected link
$('a[rel=ajax]').removeClass('selected');
$(this).addClass('selected');
//hide the content and show the progress bar
//$('#content').hide();
$('#loading').show();
//run the ajax
getPage();
//cancel the anchor tag behaviour
return false;
});
});
function pageload(hash) {
//if hash value exists, run the ajax
if (hash) getPage();
}
function getPage() {
//generate the parameter for the php script
var data = 'page=' + encodeURIComponent(document.location.hash);
$.ajax({
url: "loader.php",
type: "GET",
data: data,
cache: false,
success: function (html) {
//hide the progress bar
$('#loading').hide();
//add the content retrieved from ajax and put it in the #content div
$('#content').html(html);
//display the body with fadeIn transition
$('#content').fadeIn('fast');
//reapply styles?
//apply syntax highlighting. this works
SyntaxHighlighter.highlight();
//relaod processing sketch, currently displays nothing
Processing.loadSketchFromSources($('#processing'), ['mysketch.pde']);
}
});
}
This the ajax-loaded content:
<!--ajax'd content-->
<??>
<h2>code</h2>
<pre class="brush: php">
$last_modified = filemtime("header.php");
echo("last modified: ");
echo(date("m.j.y h:ia", $last_modified));
</pre>
<script type="application/processing">
</script>
<canvas data-processing-sources="mysketch.pde" id="processing">
</canvas>
</div>
</body>
</html>
<??>
So, let's analyze what usually happens when you include an (external or internal) Javascript code: It will automatically execute only the code that is available in the global scope. "Good" scripts will only add one command to the global scope which will then execute the initialization code somewhere in a function/method.
All you need to do is view the external Javascript file and find out what is being executed from the global scope. There is no general answer to that ... some scripts use an object and call its init() method ... but that is totally subject to the imagination of the developer.
If you have javascript that needs to trigger, you MUST add this to the head element:
var head = document.head || document.getElementsByTagName("head")[0];
var script = document.createElement("script");
script.innerHTML = "your AJAX-obtained js code";
head.appendChild(script);
The same trick goes for CSS. Add a element to the head with your CSS declarations as innerHTML. So: make sure to preprocess your AJAX response and split out the JavaScript and CSS elements, then add those to the document header. It's probably easier to make your response a JSON object along the lines of:
{
html: "<html>string<goes>here</goes></html>",
scripts: ["url1","url2","url2",...],
style: ...
}
and then parsing that JSON for the html (which you use as innerHTML for a new document.createElement("div") or something, and then append wherever it needs appending), the scripts (which you turn into elements for HEAD insertion) and the style declarations (which you turn into elements for HEAD insertion).
(On a functional note, your example AJAX response looks like it has PHP code in it. I have no idea what you're using it for, but that looks like a bad response)
Just incase anyone stumbles upon this:
If you have processing.js already loaded, simply call Processing.reload() in your AJAX success/complete function.
Perhaps you already have an element with id="processing" on your page. In that case $("#processing") will only return the first one. If that is the case, change the id or use a class instead.
The other option, which I don't recommend, is to use $("[id=processing]"). That will return every element on the page with id="processing". But, don't use it. Use unique ids in your page, or switch to using classes, whichever works best for you.
I'm trying to do some simple jQuery stuff 'dynamically' from within a MediaWiki content page. Its really just to 'beauty up' some different features.
I've done the following:
http://www.mediawiki.org/wiki/JQuery
http://www.mediawiki.org/wiki/Manual:$wgRawHtml (mainly for Paypal buttons initially)
The below code does not work. This is put in a blank content page.
<html>
<script>
$j(document).ready(function(){
$j('#test').hover(
function(){
$j('#test').attr('background-color','red');
},
function(){
$j('#test').removeAttr('background-color');
}
);
});
</script>
<div id="test">Howdy</div>
</html>
Nothing happens...
Any ideas?
Update:
I have attempted this simple solution with no result.
example.com/wiki/index.php?title=MediaWiki:Common.js
$j('#jTest-Howdy').hover(
function(){
$j('#jTest-Howdy').addClass('jTest-red');
},
function(){
$j('#jTest-Howdy').removeClass('jTest-red');
}
);
example.com/wiki/index.php?title=MediaWiki:Common.css
.jTest-red { background-color: red; }
example.com/wiki/index.php?title=jQueryTest
<html>
<div id="jTest-Howdy">Howdy</div>
</html>
as you can see here, this code should work IF jQuery was being loaded properly...
http://jsfiddle.net/5qFhv/
but it is not working for me... any help?
If you're using the jQuery that's loaded by MediaWiki 1.17, be aware that most JavaScript is loaded after page content. An inline <script> element is executed immediately when it's reached, so $j would not be defined at this time -- you'll probably see some errors in your JavaScript error console to this effect.
(Offhand I'm not sure about the jQuery that's included with 1.16; versions of MediaWiki prior to that as far as I know did not include jQuery.)
Generally what you want to do here is to either put JavaScript code modules into the 'MediaWiki:Common.js' page and let that hook up to your HTML markup, or create a MediaWiki extension -- which you can then invoke from your pages, and which will let you create any fun HTML and JavaScript output you like.
http://www.mediawiki.org/wiki/Manual:Interface/JavaScript
http://www.mediawiki.org/wiki/Manual:Developing_extensions
Code you put in your 'MediaWiki:Common.js' page will be loaded after other UI initialization, ensuring that code and variables are present so you can call into jQuery etc.
I don't know much about MediaWiki, but to me it looks like some simple javascript mistakes.
In the first sample you are trying to set an attribute on the element,
when you need to set the css or style attribute.
$j('#test').css('background-color', 'red');
In both samples you are binding an event to an element that doesn't exist yet in the DOM, so it will fail. You could use the live method, which will work for existing and future elements introduced in the DOM.
$j.('#test').live('mouseover', function(){
$j(this).addClass('hover-class');
}).live('mouseout', function(){
$j(this).removeClass('hover-class');
});
Hope that helps.
Try putting all your custom jQuery code in its own file, then load it as a module with ResourceLoader, after jQuery.
http://www.mediawiki.org/wiki/ResourceLoader/Migration_guide_for_extension_developers
Also, as a debugging method: completely load your site in Firefox, then enter your custom jQuery code in the console. If it works, your problem is a race condition. If it doesn't, jQuery isn't loading for some reason.