I'm using a regExp in my project but some how I'm getting some undesirable characters
my RegExp looks like this:
new RegExp("[א-ת,A-z,',','(',')','.','-',''']");
which supposed to avoid characters like \ or []
but let my use one and more from (,),-,alphabets etc.
Unfortunately it doesnt happen
Which pattren includes both desirable and undesirable characters??
thanks for your help
Well your regular expression just says to match one "good" character (and incorrectly at that).
I think something closer to this would be what you want, though I'm not sure about the higher-page UTC characters:
var regexp = /^[א-תA-Za-z,()\-']*$/;
If the alefbet part doesn't work (it looks backwards to me, but I guess that's kind of a conundrum :-), try:
var regexp = /^[\u05DA-\05EAA-Za-z,()\-']*$/;
Might be good to tack an "i" (ignore case) modifier on the end too:
var regexp = /^[\u05DA-\05EAA-Za-z,()\-']*$/i;
This also does not handler the various diacritical marks; I don't know if you need those matched or not.
First of all, you don't need all those single quotes and commas. Second, you want A-Za-z, not.A-z. The latter includes ASCII characters between "Z" and "a".
var re = new RegExp("[א-תA-Za-z,()\.'\s-]");
Related
There may be a very simple answer to this, probably because of my familiarity (or possibly lack thereof) of the replace method and how it works with regex.
Let's say I have the following string: abcdefHellowxyz
I just want to strip the first six characters and the last four, to return Hello, using regex... Yes, I know there may be other ways, but I'm trying to explore the boundaries of what these methods are capable of doing...
Anyway, I've tinkered on http://regex101.com and got the following Regex worked out:
/^(.{6}).+(.{4})$/
Which seems to pass the string well and shows that abcdef is captured as group 1, and wxyz captured as group 2. But when I try to run the following:
"abcdefHellowxyz".replace(/^(.{6}).+(.{4})$/,"")
to replace those captured groups with "" I receive an empty string as my final output... Am I doing something wrong with this syntax? And if so, how does one correct it, keeping my original stance on wanting to use Regex in this manner...
Thanks so much everyone in advance...
The code below works well as you wish
"abcdefHellowxyz".replace(/^.{6}(.+).{4}$/,"$1")
I think that only use ()to capture the text you want, and in the second parameter of replace(), you can use $1 $2 ... to represent the group1 group2.
Also you can pass a function to the second parameter of replace,and transform the captured text to whatever you want in this function.
For more detail, as #Akxe recommend , you can find document on https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/replace.
You are replacing any substring that matches /^(.{6}).+(.{4})$/, with this line of code:
"abcdefHellowxyz".replace(/^(.{6}).+(.{4})$/,"")
The regex matches the whole string "abcdefHellowxyz"; thus, the whole string is replaced. Instead, if you are strictly stripping by the lengths of the extraneous substrings, you could simply use substring or substr.
Edit
The answer you're probably looking for is capturing the middle token, instead of the outer ones:
var str = "abcdefHellowxyz";
var matches = str.match(/^.{6}(.+).{4}$/);
str = matches[1]; // index 0 is entire match
console.log(str);
I need some help with Regex.
I have this string: \\lorem\ipsum\dolor,\\sit\amet\conseteteur,\\sadipscing\elitr\sed\diam
and want to get the result: ["dolor", "conseteteur", "diam"]So in words the word between the last backslash and a comma or the end.
I've already figured out a working test, but because of reasons it won't work in neitherChrome (v44.0.2403.130) nor IE (v11.0.9600.17905) console.There i'm getting the result: ["\loremipsumdolor,", "\sitametconseteteur,", "\sadipscingelitrseddiam"]
Can you please tell me, why the online testers aren't working and how i can achieve the right result?
Thanks in advance.
PS: I've tested a few online regex testers with all the same result. (regex101.com, regexpal.com, debuggex.com, scriptular.com)
The string
'\\lorem\ipsum\dolor,\\sit\amet\conseteteur,\\sadipscing\elitr\sed\diam'
is getting escaped, if you try the following in the browser's console you'll see what happens:
var s = '\\lorem\ipsum\dolor,\\sit\amet\conseteteur,\\sadipscing\elitr\sed\diam'
console.log(s);
// prints '\loremipsumdolor,\sitametconseteteur,\sadipscingelitrseddiam'
To use your original string you have to add additional backslashes, otherwise it becomes a different one because it tries to escape anything followed by a single backslash.
The reason why it works in regexp testers is because they probably sanitize the input string to make sure it gets evaluated as-is.
Try this (added an extra \ for each of them):
str = '\\\\lorem\\ipsum\\dolor,\\\\sit\\amet\\conseteteur,\\\\sadipscing\\elitr\\sed\\diam'
re = /\\([^\\]*)(?:,|$)/g
str.match(re)
// should output ["\dolor,", "\conseteteur,", "\diam"]
UPDATE
You can't prevent the interpreter from escaping backslashes in string literals, but this functionality is coming with EcmaScript6 as String.raw
s = String.raw`\\lorem\ipsum\dolor,\\sit\amet\conseteteur,\\sadipscing\elitr\sed\diam`
Remember to use backticks instead of single quotes with String.raw.
It's working in latest Chrome, but I can't say for all other browsers, if they're moderately old, it probably isn't implemented.
Also, if you want to avoid matching the last backslash you need to:
remove the \\ at the start of your regexp
use + instead of * to avoid matching the line end (it will create an extra capture)
use a positive lookahead ?=
like this
s = String.raw`\\lorem\ipsum\dolor,\\sit\amet\conseteteur,\\sadipscing\elitr\sed\diam`;
re = /([^\\]+)(?=,|$)/g;
s.match(re);
// ["dolor", "conseteteur", "diam"]
You may try this,
string.match(/[^\\,]+(?=,|$)/gm);
DEMO
I'm trying to improve my understanding of Regex, but this one has me quite mystified.
I started with some text defined as:
var txt = "{\"columns\":[{\"text\":\"A\",\"value\":80},{\"text\":\"B\",\"renderer\":\"gbpFormat\",\"value\":80},{\"text\":\"C\",\"value\":80}]}";
and do a replace as follows:
txt.replace(/\"renderer\"\:(.*)(?:,)/g,"\"renderer\"\:gbpFormat\,");
which results in:
"{"columns":[{"text":"A","value":80},{"text":"B","renderer":gbpFormat,"value":80}]}"
What I expected was for the renderer attribute value to have it's quotes removed; which has happened, but also the C column is completely missing! I'd really love for someone to explain how my Regex has removed column C?
As an extra bonus, if you could explain how to remove the quotes around any value for renderer (i.e. so I don't have to hard-code the value gbpFormat in the regex) that'd be fantastic.
You are using a greedy operator while you need a lazy one. Change this:
"renderer":(.*)(?:,)
^---- add here the '?' to make it lazy
To
"renderer":(.*?)(?:,)
Working demo
Your code should be:
txt.replace(/\"renderer\"\:(.*?)(?:,)/g,"\"renderer\"\:gbpFormat\,");
If you are learning regex, take a look at this documentation to know more about greedyness. A nice extract to understand this is:
Watch Out for The Greediness!
Suppose you want to use a regex to match an HTML tag. You know that
the input will be a valid HTML file, so the regular expression does
not need to exclude any invalid use of sharp brackets. If it sits
between sharp brackets, it is an HTML tag.
Most people new to regular expressions will attempt to use <.+>. They
will be surprised when they test it on a string like This is a
first test. You might expect the regex to match and when
continuing after that match, .
But it does not. The regex will match first. Obviously not
what we wanted. The reason is that the plus is greedy. That is, the
plus causes the regex engine to repeat the preceding token as often as
possible. Only if that causes the entire regex to fail, will the regex
engine backtrack. That is, it will go back to the plus, make it give
up the last iteration, and proceed with the remainder of the regex.
Like the plus, the star and the repetition using curly braces are
greedy.
Try like this:
txt = txt.replace(/"renderer":"(.*?)"/g,'"renderer":$1');
The issue in the expression you were using was this part:
(.*)(?:,)
By default, the * quantifier is greedy by default, which means that it gobbles up as much as it can, so it will run up to the last comma in your string. The easiest solution would be to turn that in to a non-greedy quantifier, by adding a question mark after the asterisk and change that part of your expression to look like this
(.*?)(?:,)
For the solution I proposed at the top of this answer, I also removed the part matching the comma, because I think it's easier just to match everything between quotes. As for your bonus question, to replace the matched value instead of having to hardcode gbpFormat, I used a backreference ($1), which will insert the first matched group into the replacement string.
Don't manipulate JSON with regexp. It's too likely that you will break it, as you have found, and more importantly there's no need to.
In addition, once you have changed
'{"columns": [..."renderer": "gbpFormat", ...]}'
into
'{"columns": [..."renderer": gbpFormat, ...]}' // remove quotes from gbpFormat
then this is no longer valid JSON. (JSON requires that property values be numbers, quoted strings, objects, or arrays.) So you will not be able to parse it, or send it anywhere and have it interpreted correctly.
Therefore you should parse it to start with, then manipulate the resulting actual JS object:
var object = JSON.parse(txt);
object.columns.forEach(function(column) {
column.renderer = ghpFormat;
});
If you want to replace any quoted value of the renderer property with the value itself, then you could try
column.renderer = window[column.renderer];
Assuming that the value is available in the global namespace.
This question falls into the category of "I need a regexp, or I wrote one and it's not working, and I'm not really sure why it has to be a regexp, but I heard they can do all kinds of things, so that's just what I imagined I must need." People use regexps to try to do far too many complex matching, splitting, scanning, replacement, and validation tasks, including on complex languages such as HTML, or in this case JSON. There is almost always a better way.
The only time I can imagine wanting to manipulate JSON with regexps is if the JSON is broken somehow, perhaps due to a bug in server code, and it needs to be fixed up in order to be parseable.
I made this regular expression: /.net.(\w*)/
I'm trying to capture the qa in a string like this:
https://xxxxxx.cloudfront.net/qa/club/Slide1.PNG
I'm doing .replace on it like so location.replace(/.net.(\w*)/,data.newName));
But instead of capturing qa, it captures .net, when I run the code in Javascript
According to this online regex tool made for ruby, it captures qa as intended
http://rubular.com/r/ItrG7BRNRn
What's the difference between Javascript regexes and Ruby regexes, and how can I make my regex work as intended in javascript?
Edit:
I changed my code to this:
var str = `https://xxxxxxxxxx.cloudfront.net/qa/club`;
var re = /\.net\/([^\/]*)\//;
console.log(data2.files[i].location.replace(re,'$1'+ "test"));
And instead of
https://dm7svtk8jb00c.cloudfront.net/test/club
I get this:
https://dm7svtk8jb00c.cloudfrontqatestclub
If I remove the $1 I get https://dm7svtk8jb00c.cloudfronttestclub, which is closer, but I want to keep the slashes.
This would be a better regex:
/\.net\/([^\/]*)\//
Remember that . will match any character, not the period character. For that you need to escape it with a leading backslash: \.
Also, \w will only match numbers, letters and underscores. You could quite legitimately have a dash in that part of the URL. Therefore you're far better off matching anything that isn't a forward slash.
I am not sure how Ruby works, but JavaScript replace will not just replace the capture group, it replaces the whole matched string. By adding another capture group, you can use $1 to add back in the string you want to keep.
...replace(/(.net.)(\w*)/,"$1" + data.newName");
You have to do that like this:
location.replace(/(\.net.)(\w*)/, '$1' + data.newName)
replace replaces the whole matched substring, not a particular group. Ruby works exactly in the same way:
ruby -e "puts 'https://xxxxxx.cloudfront.net/qa/club/Slide1.PNG'.sub(/.net.(\w*)/, '##')"
https://xxxxxx.cloudfront##/club/Slide1.PNG
ruby -e "puts 'https://xxxxxx.cloudfront.net/qa/club/Slide1.PNG'.sub(/(.net.)(\w*)/, '\\1' + '##')"
https://xxxxxx.cloudfront.net/##/club/Slide1.PNG
There's no difference (at least with the pattern you've provided). In both cases, the expression matches ".net/qa", with qa being the first capture group within the expression. Notice that even in your linked example the entire match is highlighted.
I'd recommend something like this:
location.replace(/(.net.)\w*/, "$1" + data.newName);
Or this, to be a bit safer:
location.replace(/(.net.)\w*/, function(m, a) { return a + data.newName; });
It's not so much a different between JavaScript and Ruby's implementations of regular expressions, it's your pattern that needs a bit of work. It's not tight enough.
You can use something like /\.net\/([^\/]+)/, which you can see in action at Rubular.
That returns the characters delimited by / following .net.
Regex patterns are very powerful, but they're also fraught with dangerous side-effects that open up big holes easily, causing false-positives, which can ruin results unexpectedly. Until you know them well, start simply, and test them every imaginable way. And, once you think you know them well, keep doing that; Patterns in code we write where I work are a particular hot-button for me, and I'm always finding holes in them in our code-reviews and requiring them to be tightened until they do exactly what the developer meant, not what they thought they meant.
While the pattern above works, I'd probably do it a bit differently in Ruby. Using the tools made for the job:
require 'uri'
URL = 'https://xxxxxx.cloudfront.net/qa/club/Slide1.PNG'
uri = URI.parse(URL)
path = uri.path # => "/qa/club/Slide1.PNG"
path.split('/')[1] # => "qa"
Or, more succinctly:
URI.parse(URL).path.split('/')[1] # => "qa"
I have one string, that looks like this:
a[abcdefghi,2,3,jklmnopqr]
The beginning "a" is fixed and non-changing, however the content within the brackets is and can follow a pattern. It will always be an alphabetical string, possibly followed by numbers separate by commas or more strings and/or numbers.
I'd like to be able to break it into chunks of the string and any numbers that follow it until the "]" or another string is met.
Probably best explained through examples and expected ideal results:
a[abcdefghi] -> "abcdefghi"
a[abcdefghi,2] -> "abcdefghi,2"
a[abcdefghi,2,3,jklmnopqr] -> "abcdefghi,2,3" and "jklmnopqr"
a[abcdefghi,2,3,jklmnopqr,stuvwxyz] -> "abcdefghi,2,3" and "jklmnopqr" and "stuvwxyz"
a[abcdefghi,2,3,jklmnopqr,1,9,stuvwxyz] -> "abcdefghi,2,3" and "jklmnopqr,1,9" and "stuvwxyz"
a[abcdefghi,1,jklmnopqr,2,stuvwxyz,3,4] -> "abcdefghi,1" and "jklmnopqr,2" and "stuvwxyz,3,4"
Ideally a malformed string would be partially caught (but this is a nice extra):
a[2,3,jklmnopqr,1,9,stuvwxyz] -> "jklmnopqr,1,9" and "stuvwxyz"
I'm using Javascript and I realize a regex won't bring me all the way to the solution I'd like but it could be a big help. The alternative is to do a lot of manually string parsing which I can do but doesn't seem like the best answer.
Advice, tips appreciated.
UPDATE: Yes I did mean alphametcial (A-Za-z) instead of alphanumeric. Edited to reflect that. Thanks for letting me know.
You'd probably want to do this in 2 steps. First, match against:
a\[([^[\]]*)\]
and extract group 1. That'll be the stuff in the square brackets.
Next, repeatedly match against:
[a-z]+(,[0-9]+)*
That'll match things like "abcdefghi,2,3". After the first match you'll need to see if the next character is a comma and if so skip over it. (BTW: if you really meant alphanumeric rather than alphabetic like your examples, use [a-z0-9]*[a-z][a-z0-9]* instead of [a-z]+.)
Alternatively, split the string on commas and reassemble into your word with number groups.
Why wouldn't a regex bring you all the way to a solution?
The following regex works against the given data, but it makes a few assumptions (at least two alphas followed by comma separated single digits).
([a-z]{2,}(?:,\\d)*)
Example:
re = new RegExp('[a-z]{2,}(?:,\\d)*', 'g')
matches = re.exec("a[abcdefghi,2,3,jklmnopqr,1,9,stuvwxyz]")
Assuming you can easily break out the string between the brackets, something like this might be what you're after:
> re = new RegExp('[a-z]+(?:,\\d)*(?:,?)', 'gi')
> while (match = re.exec("abcdefghi,2,3,jklmnopqr,1,9,stuvwxyz")) { print(match[0]) }
abcdefghi,2,3,
jklmnopqr,1,9,
stuvwxyz
This has the advantage of working partially in your malformed case:
> while (match = re.exec("abcdefghi,2,3,jklmnopqr,1,9,stuvwxyz")) { print(match[0]) }
jklmnopqr,1,9,
stuvwxy
The first character class [a-z] can be modified if you meant for it to be truly alphanumeric.