Why is it that when I use the dojo.hitch function and try to reference the "this" operator inside it, that it gives me reference to the wrong object?
console.debug(dijit.byId("widgetName")); //works as expected and prints out the window object
dojo.hitch(dijit.byId("widgetName"), tester())(); //this should be executing the tester function in the scope of the widget object
function tester() {
console.debug(this); //prints out the Javascript Window object instead of the widget object!!!!
}
Thanks
Based on what you have just shown, I can now safely provide an answer explaining what is wrong.
When you do a dojo.hitch() you should not call the function inside of it, but instead call the result of the function. That is, you need to provide dojo.hitch with a reference to the function to hitch, not the result of invoking that function.
In your example, you are calling tester() (which invokes the function tester) inside of the dojo.hitch(), which calls the tester once. Even though you have dojo.hitch()(); because tester() does not return a function handler (but the result of tester, in this case undefined), the hitch()(); does nothing. That might have been confusing so I will show you with an example.
Don't do this:
dojo.hitch( context, handler() )();
Instead do this:
dojo.hitch( context, handler )();
So to make what you have very readable you would do this:
widget = dijit.byId("widgetName");
tester = function() {
console.log(this);
}
handle = dojo.hitch(widget, tester);
handle();
Your mistake was trying to call the function from within the dojo.hitch(). This mistake also was not present in your original question.
Related
I have the following function
function hello() {
alert("hi!");
}
Take this piece of code:
var elem = document.getElementById("btn");
elem.onclick = hello;
My question might be a bit hard to understand, so bear with me:
What EXACTLY differentiates THIS piece of code from a normal call, or what makes this piece of code require a reference to the function variable rather than a regular call? (hello();)
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Well, the onclick property expects a reference to a function, for it to execute when the element is clicked. Normally it's either:
element.onclick = funcRef;
or
element.onclick = function () {
funcRef();
};
(but of course, it's best to use addEventListener and attachEvent)
Notice how both of them are references to functions, not calling.
When something expects a reference, you don't call it...you assign a reference to it (first example).
When you want to specifically call a function, you call it with () (second example). But notice how in the second example, there's still a reference to a function that's assigned to onclick - it's just an anonymous function.
Probably the more important part:
Some people think you want to do this:
element.onclick = funcRef();
But that immediately executes the function (because of the ()), and assigns its return value to onclick. Unless the return value is a function, this isn't what you want.
I think the moral of the story is that when you want/need something to execute right now, you call the function. If the function is wanted for later use or needs stored, you don't call it.
Do you want it to execute NOW? Then call it.
a=hello() means "Call hello() ASAP, and set its return value to a".
On the other hand, a=hello means "a is an alias for hello. If you call a(), you get the same results as calling hello()"
You use the latter for callbacks, etc, where you want to tell the browser what you want to happen after an event occurs. For example, you may want to say "call hello() when the user clicks" (as in the example). Or, "When the AJAX query returns a result, call the callback() function on the returned data".
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Do you need the function to run now?
Than add the () to execute it
Do you need to function to be referenced so it is called later?
Do not add the ().
Pretty much all statements in JavaScript have a return value. Unless otherwise specified, functions in JavaScript will return undefined when called. So, the only context in which it would make sense to call your function in this assignment statement if it were to return a function:
function hello() {
return function() {
alert("hi!");
}
}
elem.onclick = hello();
A reference to your function is needed somewhere no matter how it gets called. The difference here is that you are not explicitly calling the hello function. You are assigning a reference to that function to the elem DOM node's onclick event handler so that when onclick is fired for that Node, your function gets called.
hello() means you call that function, which means the function will be executed directly.
while when you have elem.onclick = hello, this is called a callback. Where hello doesn't get executed directly but only when a certain event is fired (in this case when there's a click on the element)
I have the following function
function hello() {
alert("hi!");
}
Take this piece of code:
var elem = document.getElementById("btn");
elem.onclick = hello;
My question might be a bit hard to understand, so bear with me:
What EXACTLY differentiates THIS piece of code from a normal call, or what makes this piece of code require a reference to the function variable rather than a regular call? (hello();)
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Well, the onclick property expects a reference to a function, for it to execute when the element is clicked. Normally it's either:
element.onclick = funcRef;
or
element.onclick = function () {
funcRef();
};
(but of course, it's best to use addEventListener and attachEvent)
Notice how both of them are references to functions, not calling.
When something expects a reference, you don't call it...you assign a reference to it (first example).
When you want to specifically call a function, you call it with () (second example). But notice how in the second example, there's still a reference to a function that's assigned to onclick - it's just an anonymous function.
Probably the more important part:
Some people think you want to do this:
element.onclick = funcRef();
But that immediately executes the function (because of the ()), and assigns its return value to onclick. Unless the return value is a function, this isn't what you want.
I think the moral of the story is that when you want/need something to execute right now, you call the function. If the function is wanted for later use or needs stored, you don't call it.
Do you want it to execute NOW? Then call it.
a=hello() means "Call hello() ASAP, and set its return value to a".
On the other hand, a=hello means "a is an alias for hello. If you call a(), you get the same results as calling hello()"
You use the latter for callbacks, etc, where you want to tell the browser what you want to happen after an event occurs. For example, you may want to say "call hello() when the user clicks" (as in the example). Or, "When the AJAX query returns a result, call the callback() function on the returned data".
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Do you need the function to run now?
Than add the () to execute it
Do you need to function to be referenced so it is called later?
Do not add the ().
Pretty much all statements in JavaScript have a return value. Unless otherwise specified, functions in JavaScript will return undefined when called. So, the only context in which it would make sense to call your function in this assignment statement if it were to return a function:
function hello() {
return function() {
alert("hi!");
}
}
elem.onclick = hello();
A reference to your function is needed somewhere no matter how it gets called. The difference here is that you are not explicitly calling the hello function. You are assigning a reference to that function to the elem DOM node's onclick event handler so that when onclick is fired for that Node, your function gets called.
hello() means you call that function, which means the function will be executed directly.
while when you have elem.onclick = hello, this is called a callback. Where hello doesn't get executed directly but only when a certain event is fired (in this case when there's a click on the element)
I have the following function
function hello() {
alert("hi!");
}
Take this piece of code:
var elem = document.getElementById("btn");
elem.onclick = hello;
My question might be a bit hard to understand, so bear with me:
What EXACTLY differentiates THIS piece of code from a normal call, or what makes this piece of code require a reference to the function variable rather than a regular call? (hello();)
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Well, the onclick property expects a reference to a function, for it to execute when the element is clicked. Normally it's either:
element.onclick = funcRef;
or
element.onclick = function () {
funcRef();
};
(but of course, it's best to use addEventListener and attachEvent)
Notice how both of them are references to functions, not calling.
When something expects a reference, you don't call it...you assign a reference to it (first example).
When you want to specifically call a function, you call it with () (second example). But notice how in the second example, there's still a reference to a function that's assigned to onclick - it's just an anonymous function.
Probably the more important part:
Some people think you want to do this:
element.onclick = funcRef();
But that immediately executes the function (because of the ()), and assigns its return value to onclick. Unless the return value is a function, this isn't what you want.
I think the moral of the story is that when you want/need something to execute right now, you call the function. If the function is wanted for later use or needs stored, you don't call it.
Do you want it to execute NOW? Then call it.
a=hello() means "Call hello() ASAP, and set its return value to a".
On the other hand, a=hello means "a is an alias for hello. If you call a(), you get the same results as calling hello()"
You use the latter for callbacks, etc, where you want to tell the browser what you want to happen after an event occurs. For example, you may want to say "call hello() when the user clicks" (as in the example). Or, "When the AJAX query returns a result, call the callback() function on the returned data".
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Do you need the function to run now?
Than add the () to execute it
Do you need to function to be referenced so it is called later?
Do not add the ().
Pretty much all statements in JavaScript have a return value. Unless otherwise specified, functions in JavaScript will return undefined when called. So, the only context in which it would make sense to call your function in this assignment statement if it were to return a function:
function hello() {
return function() {
alert("hi!");
}
}
elem.onclick = hello();
A reference to your function is needed somewhere no matter how it gets called. The difference here is that you are not explicitly calling the hello function. You are assigning a reference to that function to the elem DOM node's onclick event handler so that when onclick is fired for that Node, your function gets called.
hello() means you call that function, which means the function will be executed directly.
while when you have elem.onclick = hello, this is called a callback. Where hello doesn't get executed directly but only when a certain event is fired (in this case when there's a click on the element)
I have the following function
function hello() {
alert("hi!");
}
Take this piece of code:
var elem = document.getElementById("btn");
elem.onclick = hello;
My question might be a bit hard to understand, so bear with me:
What EXACTLY differentiates THIS piece of code from a normal call, or what makes this piece of code require a reference to the function variable rather than a regular call? (hello();)
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Well, the onclick property expects a reference to a function, for it to execute when the element is clicked. Normally it's either:
element.onclick = funcRef;
or
element.onclick = function () {
funcRef();
};
(but of course, it's best to use addEventListener and attachEvent)
Notice how both of them are references to functions, not calling.
When something expects a reference, you don't call it...you assign a reference to it (first example).
When you want to specifically call a function, you call it with () (second example). But notice how in the second example, there's still a reference to a function that's assigned to onclick - it's just an anonymous function.
Probably the more important part:
Some people think you want to do this:
element.onclick = funcRef();
But that immediately executes the function (because of the ()), and assigns its return value to onclick. Unless the return value is a function, this isn't what you want.
I think the moral of the story is that when you want/need something to execute right now, you call the function. If the function is wanted for later use or needs stored, you don't call it.
Do you want it to execute NOW? Then call it.
a=hello() means "Call hello() ASAP, and set its return value to a".
On the other hand, a=hello means "a is an alias for hello. If you call a(), you get the same results as calling hello()"
You use the latter for callbacks, etc, where you want to tell the browser what you want to happen after an event occurs. For example, you may want to say "call hello() when the user clicks" (as in the example). Or, "When the AJAX query returns a result, call the callback() function on the returned data".
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Do you need the function to run now?
Than add the () to execute it
Do you need to function to be referenced so it is called later?
Do not add the ().
Pretty much all statements in JavaScript have a return value. Unless otherwise specified, functions in JavaScript will return undefined when called. So, the only context in which it would make sense to call your function in this assignment statement if it were to return a function:
function hello() {
return function() {
alert("hi!");
}
}
elem.onclick = hello();
A reference to your function is needed somewhere no matter how it gets called. The difference here is that you are not explicitly calling the hello function. You are assigning a reference to that function to the elem DOM node's onclick event handler so that when onclick is fired for that Node, your function gets called.
hello() means you call that function, which means the function will be executed directly.
while when you have elem.onclick = hello, this is called a callback. Where hello doesn't get executed directly but only when a certain event is fired (in this case when there's a click on the element)
I have the following function
function hello() {
alert("hi!");
}
Take this piece of code:
var elem = document.getElementById("btn");
elem.onclick = hello;
My question might be a bit hard to understand, so bear with me:
What EXACTLY differentiates THIS piece of code from a normal call, or what makes this piece of code require a reference to the function variable rather than a regular call? (hello();)
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Well, the onclick property expects a reference to a function, for it to execute when the element is clicked. Normally it's either:
element.onclick = funcRef;
or
element.onclick = function () {
funcRef();
};
(but of course, it's best to use addEventListener and attachEvent)
Notice how both of them are references to functions, not calling.
When something expects a reference, you don't call it...you assign a reference to it (first example).
When you want to specifically call a function, you call it with () (second example). But notice how in the second example, there's still a reference to a function that's assigned to onclick - it's just an anonymous function.
Probably the more important part:
Some people think you want to do this:
element.onclick = funcRef();
But that immediately executes the function (because of the ()), and assigns its return value to onclick. Unless the return value is a function, this isn't what you want.
I think the moral of the story is that when you want/need something to execute right now, you call the function. If the function is wanted for later use or needs stored, you don't call it.
Do you want it to execute NOW? Then call it.
a=hello() means "Call hello() ASAP, and set its return value to a".
On the other hand, a=hello means "a is an alias for hello. If you call a(), you get the same results as calling hello()"
You use the latter for callbacks, etc, where you want to tell the browser what you want to happen after an event occurs. For example, you may want to say "call hello() when the user clicks" (as in the example). Or, "When the AJAX query returns a result, call the callback() function on the returned data".
How can I know where I'm supposed to give a reference to the function, and when I'm supposed to actually call it?
Do you need the function to run now?
Than add the () to execute it
Do you need to function to be referenced so it is called later?
Do not add the ().
Pretty much all statements in JavaScript have a return value. Unless otherwise specified, functions in JavaScript will return undefined when called. So, the only context in which it would make sense to call your function in this assignment statement if it were to return a function:
function hello() {
return function() {
alert("hi!");
}
}
elem.onclick = hello();
A reference to your function is needed somewhere no matter how it gets called. The difference here is that you are not explicitly calling the hello function. You are assigning a reference to that function to the elem DOM node's onclick event handler so that when onclick is fired for that Node, your function gets called.
hello() means you call that function, which means the function will be executed directly.
while when you have elem.onclick = hello, this is called a callback. Where hello doesn't get executed directly but only when a certain event is fired (in this case when there's a click on the element)