I use this js code to match a hostname from a string:
url.match(/:\/\/(www\.)?(.[^/:]+)/);
This works when the url has protocol:// at the beginning. For example:
This works fine:
var url = "http://domain.com/page";
url.match(/:\/\/(www\.)?(.[^/:]+)/);
But this doesn't:
var url = "domain.com/page";
url.match(/:\/\/(www\.)?(.[^/:]+)/);
I have tried:
url.match(/(:\/\/)?(www\.)?(.[^/:]+)/);
And that matches fine the hostname when it doesn't contain protocol://, but when it does contains it it only returns the protocol and not the hostname.
How could I match the domain when it doesn't contains it?
I used this function from Steven Levithan, it parses urls quite decently.
Here's how you use this function
alert(parseUri("www.domain.com/foo").host)
OK before you have a brain meltdown from #xanatos answer here is a simple regex for basic needs. The other answers are more complete and handle more cases than this regex :
(?:(?:(?:\bhttps?|ftp)://)|^)([-A-Z0-9.]+)/
Group 1 will have your host name. URL parsing is a fragile thing to do with regexes. You were on the right track. You had two regexes that worked partially. I simply combined them.
Edit : I was tired yesterday night. Here is the regex for jscript
if (subject.match(/(?:(?:(?:\bhttps?|ftp):\/\/)|^)([\-a-z0-9.]+)\//i)) {
// Successful match
} else {
// Match attempt failed
}
This
var rx = /^(?:(?:ht|f)tp(?:s?)\:\/\/|~\/|\/)?(?:\w+:\w+#)?(?:(?:[-\w]+\.)+(?:com|org|net|gov|mil|biz|info|mobi|name|aero|jobs|museum|travel|[a-z]{2}))(?::[\d]{1,5})?(?:(?:(?:\/(?:[-\w~!$+|.,=]|%[a-f\d]{2})+)+|\/)+|\?|#)?(?:(?:\?(?:[-\w~!$+|.,*:]|%[a-f\d{2}])+=?(?:[-\w~!$+|.,*:=]|%[a-f\d]{2})*)(?:&(?:[-\w~!$+|.,*:]|%[a-f\d{2}])+=?(?:[-\w~!$+|.,*:=]|%[a-f\d]{2})*)*)*(?:#(?:[-\w~!$+|.,*:=]|%[a-f\d]{2})*)?$/;
should be the uber-url parsing regex :-) Taken from here http://flanders.co.nz/2009/11/08/a-good-url-regular-expression-repost/
Test here: http://jsfiddle.net/Qznzx/1/
It shows the uselessness of regexes.
This might be a bit more complex than necessary but it seems to work:
^((?:.+?:\/\/)?(?:.[^/:]+)+)$
A non-capturing group for the protocol. From the start of the string
match any number of characters until a :. There may be zero or one
protocol.
A non-capturing group for the rest of the url. This part must exist.
Group it all up in single group.
Related
How can I extract only top-level and second-level domain from a URL using regex? I want to skip all lower level domains. Any ideas?
Here's my idea,
Match anything that isn't a dot, three times, from the end of the line using the $ anchor.
The last match from the end of the string should be optional to allow for .com.au or .co.nz type of domains.
Both the last and second last matches will only match 2-3 characters, so that it doesn't confuse it with a second-level domain name.
Regex:
[^.]*\.[^.]{2,3}(?:\.[^.]{2,3})?$
Demonstration:
Regex101 Example
Updated 2019
This is an old question, and the challenge here is a lot more complicated as we start adding new vanity TLDs and more ccTLD second level domains (e.g. .co.uk, .org.uk). So much so, that a regular expression is almost guaranteed to return false positives or negatives.
The only way to reliably get the primary host is to call out to a service that knows about them, like the Public Suffix List.
There are several open-source libraries out there that you can use, like psl, or you can write your own.
Usage for psl is quite intuitive. From their docs:
var psl = require('psl');
// Parse domain without subdomain
var parsed = psl.parse('google.com');
console.log(parsed.tld); // 'com'
console.log(parsed.sld); // 'google'
console.log(parsed.domain); // 'google.com'
console.log(parsed.subdomain); // null
// Parse domain with subdomain
var parsed = psl.parse('www.google.com');
console.log(parsed.tld); // 'com'
console.log(parsed.sld); // 'google'
console.log(parsed.domain); // 'google.com'
console.log(parsed.subdomain); // 'www'
// Parse domain with nested subdomains
var parsed = psl.parse('a.b.c.d.foo.com');
console.log(parsed.tld); // 'com'
console.log(parsed.sld); // 'foo'
console.log(parsed.domain); // 'foo.com'
console.log(parsed.subdomain); // 'a.b.c.d'
Old answer
You could use this:
(\w+\.\w+)$
Without more details (a sample file, the language you're using), it's hard to discern exactly whether this will work.
Example: http://regex101.com/r/wD8eP2
Also, you can likely do that with some expression similar to,
^(?:https?:\/\/)(?:w{3}\.)?.*?([^.\r\n\/]+\.)([^.\r\n\/]+\.[^.\r\n\/]{2,6}(?:\.[^.\r\n\/]{2,6})?).*$
and add as much as capturing groups that you want to capture the components of a URL.
Demo
If you wish to simplify/modify/explore the expression, it's been explained on the top right panel of regex101.com. If you'd like, you can also watch in this link, how it would match against some sample inputs.
RegEx Circuit
jex.im visualizes regular expressions:
For anyone using JavaScript and wanting a simple way to extract the top and second level domains, I ended up doing this:
'example.aus.com'.match(/\.\w{2,3}\b/g).join('')
This matches anything with a period followed by two or three characters and then a word boundary.
Here's some example outputs:
'example.aus.com' // .aus.com
'example.austin.com' // .austin.com
'example.aus.com/howdy' // .aus.com
'example.co.uk/howdy' // .co.uk
Some people might need something a bit cleverer, but this was enough for me with my particular dataset.
Edit
I've realised there are actually quite a few second-level domains which are longer than 3 characters (and allowed). So, again for simplicity, I just removed the character counting element of my regex:
'example.aus.com'.match(/\.\w*\b/g).join('')
Since TLDs now include things with more than three-characters like .wang and .travel, here's a regex that satisfies these new TLDs:
([^.\s]+\.[^.\s]+)$
Strategy: starting at the end of the string, look for one or more characters that aren't periods or whitespace, followed by a single period, followed by one or more characters that aren't periods or whitespace.
http://regexr.com/3bmb3
With capturing groups you can achieve some magix.
For example, consider the following javascript:
let hostname = 'test.something.else.be';
let domain = hostname.replace(/^.+\.([^\.]+\.[^\.]+)$/, '$1');
document.write(domain);
This will result in a string containing 'else.com'. This is because the regex itself will match the complete string and the capturing group will be mapped to $1. So it replaces the complete string 'test.something.else.com' with '$1' which is actually 'else.com'.
The regex isn't pretty and can probably be made more dynamic with things like {3} for defining how many levels deep you want to look for subdomains, but this is just an illustration.
if you want all specific Top Level Domain name then you can write regular expression like this:
[RegularExpression("^(https?:\\/\\/)?(([\\w]+)?\\.?(\\w+\\.((za|zappos|zara|zero|zip|zippo|zm|zone|zuerich|zw))))\\/?$", ErrorMessage = "Is not a valid fully-qualified URL.")]
You can also put more domain name from this link:
https://www.icann.org/resources/pages/tlds-2012-02-25-en
The following regex matches a domain with root and tld extractions (named capture groups) from a url or domain string:
(?:\w+:\/{2})?(?<cs_domain>(?<cs_domain_sub>(?:[\w\-]+\.)*?)(?<cs_domain_root>[\w\-]+(?<cs_domain_tld>(?:\.\w{2})?(?:\.\w{2,3}|\.xn-+\w+|\.site|\.club))))\|
It's hard to say if it is perfect, but it works on all the test data sets that I have put it against including .club, .xn-1234, .co.uk, and other odd endings. And it does it in 5556 steps against 40k chars of logs, so the efficiency seems reasonable too.
If you need to be more specific:
/\.(?:nl|se|no|es|milru|fr|es|uk|ca|de|jp|au|us|ch|it|io|org|com|net|int|edu|mil|arpa)/
Based on http://www.seobythesea.com/2006/01/googles-most-popular-and-least-popular-top-level-domains/
I have been trying to make a Reg Exp to match the URL with specific domain name.
So if i want to check if this url is from example.com
what reg exp should be the best?
This reg exp should match following type of URLs:
http://api.example.com/...
http://preview.example.com/...
http://www.example.com/...
http://purhcase.example.com/...
Just simple rule, like http://{something}.example.com/{something} then should pass.
Thank you.
I think this is what you're looking for: (https?:\/\/(.+?\.)?example\.com(\/[A-Za-z0-9\-\._~:\/\?#\[\]#!$&'\(\)\*\+,;\=]*)?).
It breaks down as follows:
https?:\/\/ to match http:// or https:// (you didn't mention https, but it seemed like a good idea).
(.+?\.)? to match anything before the first dot (I made it optional so that, for example, http://example.com/ would be found
example\.com (example.com, of course);
(\/[A-Za-z0-9\-\._~:\/\?#\[\]#!$&'\(\)\*\+,;\=]*)?): a slash followed by every acceptable character in a URL; I made this optional so that http://example.com (without the final slash) would be found.
Example: https://regex101.com/r/kT8lP2/1
Use indexOf javascript API. :)
var url = 'http://api.example.com/api/url';
var testUrl = 'example.com';
if(url.indexOf(testUrl) !== -1) {
console.log('URL passed the test');
} else{
console.log('URL failed the test');
}
EDIT:
Why use indexOf instead of Regular Expression.
You see, what you have here for matching is a simple string (example.com) not a pattern. If you have a fixed string, then no need to introduce semantic complexity by checking for patterns.
Regular expressions are best suited for deciding if patterns are matched.
For example, if your requirement was something like the domain name should start with ex end with le and between start and end, it should contain alphanumeric characters out of which 4 characters must be upper case. This is the usecase where regular expression would prove beneficial.
You have simple problem so it's unnecessary to employ army of 1000 angels to convince someone who loves you. ;)
Use this:
/^[a-zA-Z0-9_.+-]+#(?:(?:[a-zA-Z0-9-]+\.)?[a-zA-Z]+\.)?
(domain|domain2)\.com$/g
To match the specific domain of your choice.
If you want to match only one domain then remove |domain2 from (domain|domain2) portion.
It will help you. https://www.regextester.com/94044
Not sure if this would work for your case, but it would probably be better to rely on the built in URL parser vs. using a regex.
var url = document.createElement('a');
url.href = "http://www.example.com/thing";
You can then call those values using the given to you by the API
url.protocol // (http:)
url.host // (www.example.com)
url.pathname // (/thing)
If that doesn't help you, something like this could work, but is likely too brittle:
var url = "http://www.example.com/thing";
var matches = url.match(/:\/\/(.[^\/]+)(.*)/);
// matches would return something like
// ["://example.com/thing", "example.com", "/thing"]
These posts could also help:
https://stackoverflow.com/a/3213643/4954530
https://stackoverflow.com/a/6168370
Good luck out there!
There are cases where the domain you're looking for could actually be found in the query section but not in the domain section: https://www.google.com/q=www.example.com
This answer would treat that case better.
See this example on regex101.
As you you pointed you only need example.com (write domain then escaped period then com), so use it in regex.
Example
UPDATED
See the answer below
I have a string that may contain several url links (http or https). I need a script that would remove all those URLs from the string completely and return that same string without them.
I tried so far:
var url = "and I said http://fdsadfs.com/dasfsdadf/afsdasf.html";
var protomatch = /(https?|ftp):\/\//; // NB: not '.*'
var b = url.replace(protomatch, '');
console.log(b);
but this only removes the http part and keeps the link.
How to write the right regex that it would remove everything that follows http and also detect several links in the string?
Thank you so much!
You can use this regex:
var b = url.replace(/(?:https?|ftp):\/\/[\n\S]+/g, '');
//=> and I said
This regex matches and removes any URL that starts with http:// or https:// or ftp:// and matches up to next space character OR end of input. [\n\S]+ will match across multi lines as well.
Did you search for a url parser regex? This question has a few comprehensive answers Getting parts of a URL (Regex)
That said, if you want something much simpler (and maybe not as perfect), you should remember to capture the entire url string and not just the protocol.
Something like
/(https?|ftp):\/\/[\.[a-zA-Z0-9\/\-]+/
should work better. Notice that the added half parses the rest of the URL after the protocol.
I am trying to test the pathname of the url, checking if pathname starts with privmsg as well as contains one of the words in the selection. And my quantifier is selecting that at least one word must be found.
New RegExp thanks to one of the answers and I extended it more.
var post = /(^\/privmsg\?).+(post|reply){1}(.*)?/;
My urls will look like
/privmsg?mode=post
/privmsg?mode=reply
/privmsg?mode=reply&p=2 //another way
Though we have other modes that I do not want. I need to just get the constant url beginning with privmsg and having at least post or reply in it. Can someone explain what is wrong with my regex string and if I used the quantifier incorrectly.
Problem now is that it is still coming out false...
You need to allow for arbitrary characters between ? and (post|reply) (i.e. mode=). E.g.:
var post = /^\/privmsg\?.+(post|reply){1}/g;
\/
|match any sequence of|
|1 or more characters |
You miss to include something for mode=.
With your regex you will match strings like /privmsg?post.
So alter your regex to include mode=:
^\/privmsg\?.*(post|reply)$
I've the following regex which needs to stop matching when it encounters a hash.
Regex:
/[?&]+([^=&]+)=([^&]*)/gi
URL Sample:
http://website.com/1068?page=4&taco=cat#tasty
The above regex will capture cat#tasty instead of just cat in the last capture group. I attempted the following which works ONLY if a hash is present.
Regex Test:
/[?&]+([^=&]+)=([^&]*)#/gi
If the url doesn't have a hash, it won't match. making the hash optional — #? — doesn't work either as the greedy * of the last capture group still grabs cat#tasty.
A little-known way to parse URLs in JavaScript is to simply create an a element and give it the url as the href attribute!
var link=document.createElement('a')
link.href="http://website.com/1068?page=4&taco=cat#tasty"
alert(link.search) //?page=4&taco=cat
alert(link.hash) //#tasty
Just tossing this out there. If you do your regex on just link.search (or perhaps link.search.substr(1)) you won't have to worry about ever matching anything but parameters.
/[?&]+([^=&]+)=([^&#]*)/gi
Although as Ray pointed out, there are many url parsers available.