Is it possible to catch an error when using JSONP with jQuery? I've tried both the $.getJSON and $.ajax methods but neither will catch the 404 error I'm testing. Here is what I've tried (keep in mind that these all work successfully, but I want to handle the case when it fails):
jQuery.ajax({
type: "GET",
url: handlerURL,
dataType: "jsonp",
success: function(results){
alert("Success!");
},
error: function(XMLHttpRequest, textStatus, errorThrown){
alert("Error");
}
});
And also:
jQuery.getJSON(handlerURL + "&callback=?",
function(jsonResult){
alert("Success!");
});
I've also tried adding the $.ajaxError but that didn't work either:
jQuery(document).ajaxError(function(event, request, settings){
alert("Error");
});
Here's my extensive answer to a similar question.
Here's the code:
jQuery.getJSON(handlerURL + "&callback=?",
function(jsonResult){
alert("Success!");
})
.done(function() { alert('getJSON request succeeded!'); })
.fail(function(jqXHR, textStatus, errorThrown) { alert('getJSON request failed! ' + textStatus); })
.always(function() { alert('getJSON request ended!'); });
It seems that JSONP requests that don't return a successful result never trigger any event, success or failure, and for better or worse that's apparently by design.
After searching their bug tracker, there's a patch which may be a possible solution using a timeout callback. See bug report #3442. If you can't capture the error, you can at least timeout after waiting a reasonable amount of time for success.
Detecting JSONP problems
If you don't want to download a dependency, you can detect the error state yourself. It's easy.
You will only be able to detect JSONP errors by using some sort of timeout. If there's no valid response in a certain time, then assume an error. The error could be basically anything, though.
Here's a simple way to go about checking for errors. Just use a success flag:
var success = false;
$.getJSON(url, function(json) {
success = true;
// ... whatever else your callback needs to do ...
});
// Set a 5-second (or however long you want) timeout to check for errors
setTimeout(function() {
if (!success)
{
// Handle error accordingly
alert("Houston, we have a problem.");
}
}, 5000);
As thedawnrider mentioned in comments, you could also use clearTimeout instead:
var errorTimeout = setTimeout(function() {
if (!success)
{
// Handle error accordingly
alert("Houston, we have a problem.");
}
}, 5000);
$.getJSON(url, function(json) {
clearTimeout(errorTimeout);
// ... whatever else your callback needs to do ...
});
Why? Read on...
Here's how JSONP works in a nutshell:
JSONP doesn't use XMLHttpRequest like regular AJAX requests. Instead, it injects a <script> tag into the page, where the "src" attribute is the URL of the request. The content of the response is wrapped in a Javascript function which is then executed when downloaded.
For example.
JSONP request: https://api.site.com/endpoint?this=that&callback=myFunc
Javascript will inject this script tag into the DOM:
<script src="https://api.site.com/endpoint?this=that&callback=myFunc"></script>
What happens when a <script> tag is added to the DOM? Obviously, it gets executed.
So suppose the response to this query yielded a JSON result like:
{"answer":42}
To the browser, that's the same thing as a script's source, so it gets executed. But what happens when you execute this:
<script>{"answer":42}</script>
Well, nothing. It's just an object. It doesn't get stored, saved, and nothing happens.
This is why JSONP requests wrap their results in a function. The server, which must support JSONP serialization, sees the callback parameter you specified, and returns this instead:
myFunc({"answer":42})
Then this gets executed instead:
<script>myFunc({"answer":42})</script>
... which is much more useful. Somewhere in your code is, in this case, a global function called myFunc:
myFunc(data)
{
alert("The answer to life, the universe, and everything is: " + data.answer);
}
That's it. That's the "magic" of JSONP. Then to build in a timeout check is very simple, like shown above. Make the request and immediately after, start a timeout. After X seconds, if your flag still hasn't been set, then the request timed out.
I know this question is a little old but I didn't see an answer that gives a simple solution to the problem so I figured I would share my 'simple' solution.
$.getJSON("example.json", function() {
console.log( "success" );
}).fail(function() {
console.log( "error" );
});
We can simply use the .fail() callback to check to see if an error occurred.
Hope this helps :)
If you collaborate with the provider, you could send another query string parameter being the function to callback when there's an error.
?callback=?&error=?
This is called JSONPE but it's not at all a defacto standard.
The provider then passes information to the error function to help you diagnose.
Doesn't help with comm errors though - jQuery would have to be updated to also callback the error function on timeout, as in Adam Bellaire's answer.
Seems like this is working now:
jQuery(document).ajaxError(function(event, request, settings){
alert("Error");
});
I use this to catch an JSON error
try {
$.getJSON(ajaxURL,callback).ajaxError();
} catch(err) {
alert("wow");
alert("Error : "+ err);
}
Edit: Alternatively you can get the error message also. This will let you know what the error is exactly. Try following syntax in catch block
alert("Error : " + err);
Mayby this works?
.complete(function(response, status) {
if (response.status == "404")
alert("404 Error");
else{
//Do something
}
if(status == "error")
alert("Error");
else{
//Do something
}
});
I dont know whenever the status goes in "error" mode. But i tested it with 404 and it responded
you ca explicitly handle any error number by adding this attribute in the ajax request:
statusCode: {
404: function() {
alert("page not found");
}
}
so, your code should be like this:
jQuery.ajax({
type: "GET",
statusCode: {
404: function() {
alert("page not found");
}
},
url: handlerURL,
dataType: "jsonp",
success: function(results){
alert("Success!");
},
error: function(XMLHttpRequest, textStatus, errorThrown){
alert("Error");
}
});
hope this helps you :)
I also posted this answer in stackoverflow - Error handling in getJSON calls
I know it's been a while since someone answerd here and the poster probably already got his answer either from here or from somewhere else. I do however think that this post will help anyone looking for a way to keep track of errors and timeouts while doing getJSON requests. Therefore below my answer to the question
The getJSON structure is as follows (found on http://api.jqueri.com):
$(selector).getJSON(url,data,success(data,status,xhr))
most people implement that using
$.getJSON(url, datatosend, function(data){
//do something with the data
});
where they use the url var to provide a link to the JSON data, the datatosend as a place to add the "?callback=?" and other variables that have to be send to get the correct JSON data returned, and the success funcion as a function for processing the data.
You can however add the status and xhr variables in your success function. The status variable contains one of the following strings : "success", "notmodified", "error", "timeout", or "parsererror", and the xhr variable contains the returned XMLHttpRequest object
(found on w3schools)
$.getJSON(url, datatosend, function(data, status, xhr){
if (status == "success"){
//do something with the data
}else if (status == "timeout"){
alert("Something is wrong with the connection");
}else if (status == "error" || status == "parsererror" ){
alert("An error occured");
}else{
alert("datatosend did not change");
}
});
This way it is easy to keep track of timeouts and errors without having to implement a custom timeout tracker that is started once a request is done.
Hope this helps someone still looking for an answer to this question.
I am working on below Ajax code in JavaScript, I am trying to pop up a dialog box when the URL could not load the JSON properly the reason may be either expired token or incorrect token, in any case, I am expecting the code to hit the error or fail but it's not happening. When the URL could load the JSON successfully, success and complete blocks are being hit as expected but nothing is being hit when URL fails. I have tried to use async: false and tried to check with a boolean variable weHaveSuccess but console.log(weHaveSuccess); which is in the last line of the code is getting executing even before success/error is being executed and it seems to me like its still loading asynchronously. I would like to know why error block is not being hit when the JSON load from URL is getting failed.
My code
function checkUser(myURL, newAccessToken, weHaveSuccess) {
$.ajax({
type: "GET",
dataType: "jsonp",
async: false,
url: myURL + newAccessToken,
error: function (XMLHttpRequest, textStatus, errorThrown) {
console.log("Status: " + textStatus);
console.log("Error: " + errorThrown);
},
success: function (data) {
console.log("Hello 2 " + JSON.stringify(data));
weHaveSuccess = true;
console.log('Message from Success ' + weHaveSuccess);
},
complete: function () {
console.log('Message from Complete ' + weHaveSuccess);
}
}).done(function (data) {
alert("Success");
console.log(data);
}).fail(function (data) {
console.log(data);
alert("Failed");
}).always(function () {
alert("In Always");
});
console.log(weHaveSuccess);
}
Thanks in advance!
AJAX requests are asynchronous. It takes time for a remote request to be made and responded to. You will have to write your post-response code within the success function or call another function from there, not within the same scope as where the call is initiated.
I am taking a bit of a guess here about what your server returns on failure. An AJAX request success means simply that a 200 OK response was received, without any consideration of the contents of the data. If an error is simply a change in the data you will need do one of the following to show an error:
Have the server set a status code header on failure, perhaps 400 Bad Request.
In the success function look within your data for whatever error response you are expecting and trigger the alert() there.
First of all the console.log(weHaveSuccess); fires first, because the $.ajax() is asynchronous while console.log is not so ajax will be triggered and return the promise when finishes, but the browser will continue with the script.
In the jQuery ajax docs says:
Cross-domain requests and dataType: "jsonp" requests do not support
synchronous operation.
It's hard to debug without seeing the response, maybe you can add some info from the network or a URL?
How about if you try the following:
Add the jsonp setting to your $.ajax() function for the callback that will handle the response and console.log there:
function myCallback(data) {
console.log(data);
}
$.ajax({
type: "GET",
dataType: "jsonp",
jsonp: myCallback,
...
I saw a lot of questions and answers on how to debug javascript with chrome, firebug etc...
but this all involves a pre-loaded js file.
Is there a way to debug (step by step, not with alerts) a js script that comes as a response to a Rails AJAX request?
Assuming that you have access to edit the file that Rails returns, you can temporarily insert a debugger; statement.
Then, when you have your browser's debugging console open as you receive the AJAX response, JS execution will halt and you can step through execution in the debugger.
If you change your response to include the debugger keyword it should hit that as a break point. You can ONLY examine the results of the ajax call from within the success handler itself. So in this case the response would be:
var test = "it isn't working";
var response = $.ajax({
type: 'GET',
url: 'jquerydemo.php',
success: function(data, textStatus, xhr){
debugger;
//alert("it's working");
},
error: function(xhr, textStatus, errorThrown){
debugger;
//alert("Error detected");
}
});
Obviously don't forget to remove that when it goes live. :D
My calls to $.post are not working all over my code. I'm not sending the request to other domains and, actually, I'm doing everything localhosted. My localhost alias was automatically defined by the Mac OS X 10.8 as ramon.local and I'm requesting from http://ramon.local/linkebuy_0.7/resourceX to http://ramon.local/linkebuy_0.7/resourceY. There are no errors on Chrome's console.
The server side doesn't receive the request and I can check it by accessing directly from the browser (typing the URL).
It's not just one call that is not working, none of them are. They were all working days ago and I'm suspicious that I accidentally changed something on my local settings. What could it be?
Here's an example of what I'm facing:
$.post(
<<CORRECT URL INSIDE THE DOMAIN>>,
{},
function(response) {
console.log('THIS SHOULD BE PRINTED ON CONSOLE');
alert('THIS SHOULD BE POPPED UP');
}
);
I don't get the alert, neither the console message while running the code above. So I tried the following:
$.support.cors = true;
$.ajax({
url: "http://ramon.local/linkebuy_0.7",
dataType: "json",
type: "GET",
crossDomain: true,
success: function (data) {
console.log(data);
},
error: function (xhr, status, error) {
alert(error + " - " + status);
}
});
I just came with $.support.cors = true; and crossDomain: true to check if it was a cross domain issue. So I was alerted No Transport - error same way as before.
What can I do to solve that?
Thanks in advance.
Try this and see if you are getting any alert:
// Assign handlers immediately after making the request,
// and remember the jqxhr object for this request
var jqxhr = $.post("your url", function() {
alert("success");
}).success(function() {
alert("second success");
}).error(function() {
alert("error");
}).complete(function() {
alert("complete");
});
// perform other work here ...
// Set another completion function for the request above
jqxhr.complete(function() {
alert("second complete");
});
Well, I solved the problem in a very strange way.
I deleted the JQuery file and downloaded it again, replacing the old one. Happens it worked out.
So, if you're:
Making AJAX requests that are not cross-domain;
Using JQuery for it (e.g. $.post, $.get, etc);
Getting No Transport AJAX error
Then re-download and replace you're JQuery source.
Else, if you're making cross-domain requests (not this case), then look for JSONP and try to set $.support.cors = true; at the beginning of you're code.
Thanks everyone for the comments and answers.
I have got a test page to use Ajax to make a http 'delete' request to a server. The following JS code works as intended in IE7, but it does not work in Firefox (unless I make the ajax call asynchronous).
In Firefox, unless async is false, the error callback gets triggered with status of 0.
Can anyone assist in explaining why this is apparently working in Firefox if the call is synchronous?
In the context of this page, a synchronous call is not a bad thing, however I have read that this should be avoided as this would effectively freeze the browser window until the response had returned. Is there an alternative solution anyone can suggest?
The relevant code is below:-
<script src="${url.context}/scripts/jquery-1.3.2.min.js"></script>
<SCRIPT LANGUAGE="JavaScript">
jQuery.noConflict();
function deleteImage(nodeParam) {
alert('hello');
var options = {
type: 'DELETE',
async: false,
url: '${url.context}/service/api/asset/delete?alf_ticket=${session.ticket}'+'&format=text'+'&'+nodeParam,
dataType: 'json',
success: function(data, textStatus) {
jQuery('#result-div').html('');
if (data['ok'] == true) {
//jQuery('#result-div').html('Delete successful using parameter - ' + nodeParam);
alert("Delete successful" );
} else {
alert( "Response 'ok' set to 'false' on success callback!" );
jQuery('#result-div').html('Delete failed!');
}
},
error: function (request, textStatus, errorThrown) {
//jQuery('#result-div').html('Delete failed!');
alert("Delete Failed");
alert(request.status);
//alert("Error callback triggered, request failed with status: " + request.status + ' ' + request.responseText);
}
};
jQuery.ajax(options);
}
// End -->
</script>
Thanks
J
Firefox doesn't call onreadystatechange for synchronous requests, so jQuery may fail to call your custom callback because of that. Otherwise it is generally bad idea to make sync requests.