Dynamic Status Updating - javascript

What is needed to implement a feature that emulates Twitter and Facebook in allowing one to post status posts and seeing responses to these posts coming in automatically?

The term you're looking for is called "Comet" and there are different ways of acheiving it, each with many implementations, frameworks and code tutorials. Googling for "Comet" and the software you plan on using will be a good start.
Edit:
A newer technology to perform this style of communication is "WebSocket". It causes an HTTP connection (say as made by an AJAX request) to behave less like an HTTP connection (where the client sends data to the server, and the server can only return data in response to the send) and more like a normal TCP connection (where both sides can send and receive data at any time).

I would use a combination of jQuery $.ajax command along with a JavaScript setTimeout() function to poll a database every X seconds. That way you wouldn't have to do a screen refresh.

For posterity's sake, new visitors to this question may want to look into the WebSocket API that was proposed as part of HTML5. It's got pretty solid browser support at this point, even going back to IE 10, so it should be safe enough to use in modern applications.

Related

Can I keep pushing data from the server to the same connection?

I'm setting up a stock-ticker like web-page, written in JavaScript. I am also writing the server that the page talks to, in C++.
I would like to make the web page efficient, such that it makes sends single subscription message to the app server, and then holds a keep-alive connection open, constantly receiving inbound data pushed from the app server.
At the moment, I have to re-issue the web clients' subscription call every time I receive data from the server. The problem is that each time the XHR object hits readyState(4), the call is effectively completed. Any data arriving at the web page after this is ignored. The web-client can resend data and that resets the object, but the send is unnecessary, and is only being used to reset the XHR object.
I would like to know if it is possible to somehow reset the existing XHR object, and put it into a state where it expects more inbound data, so that when more data is pushed to the web page, the web page responds and processes it.
Thanks in advance for any help you can give. Note: Not using JQuery on this project.
I highly recommend looking into Websockets, especially a library like socket.io, which encapsulates various browser's implementations of Websocket transports into a single API (WS, JSON, JSONP, Flash and Long Polling).
Socket.io client libraries should be now be supported by all major browsers. Your only challenge might be locating a C++ specific server implementation. Hopefully this SO question might be of some help
Otherwise, your only other option is long-polling or comet on the client with a suitable server-side implementation that would scale (i.e. something like an event driven server like NginX as opposed to a thread-per-connection architecture.)
I do appreciate that you are committed to C++ but my humble advise would be to investigate Node.js as it can and does provide a very performant solution with very little effort.
HTH and all the best.
HTTP is a one-off protocol: one request, one response, and you're done. If you want to keep a connection open, you can use Websockets (MDN reference page, client-side code example). However consider it won't be supported on older browsers (IE, for example, just started supporting Websockets on version 10), so you'll probably need to implement a fallback using XHR and long-polling.

If I wanted to create an AJAX chat what communication technique should be used to maintain scalability?

I put together an AJAX chat a while back ASP.NET MVC and jQuery. The javascript would hit the server about every 7 seconds to check for new messages. Obviously this was horrible on performance as the chat grew and included more and more users. The site traffic grew exponentially with so many requests going on. A user could leave the computer on all day and not even be there and they would still be making hits every 7 seconds.
Is there a better way to do this? I have heard of something called "push" but I haven't really been able to wrap my head around it. I think I just need pointed in the right direction.
1.) What is the best way to develop an AJAX chat and have it be scalable?
2.) What is push and how would I just that with jQuery?
1.) What is the best way to develop an AJAX chat and have it be scalable?
I agree with #freakish about the complexity and potential lack of scaling of IIS.
However, there is a relatively new Microsoft option in the works called SignalR which could become a core part of ASP.NET. More details in this related SO Question:
AJAX Comet - Is there any solution Microsoft is working on or supports to allow it to be scalable?
2.) What is push and how would I just that with jQuery?
Partially answered elsewhere, but it's a long-held persistent connection between the server and the client which means the server can instantly 'push' data to the client when it has new data available.
jQuery does support making AJAX requests but the core library doesn't support expose ways of doing HTTP Long-Polling or HTTP Streaming. More information in this SO answer to 'Long Polling/HTTP Streaming General Questions'.
Server push is a technology that allows the server to push data back to the client without forcing client to make many requests (like every 7 seconds). It is not really a matter of javascript but rather good server scripting. The upcoming HTML5 will make it simple due to server-sent events and/or WebSockets. This will be a true TCP connection between different machines.
But if you intend to make a webpage compatible with older browsers, then the most common technique is the long polling. The client sends request to the server and the server does not respond to it until it has new data. If it does then the response is made and the client immediatly after receiving data calls the server with new request. In practice however this requires the server to be well-written (for example it has to maintain thousands of idle requests at the same time) and can become a rather big challenge for developers.
I hope this helps. :) Good luck!
The technique you should use is the real-time persistent long running connections over a web page using WebSockets. You can use this library.
Node.js is becoming quite popular to build something like this and supports socket connections so you could push the data out only when there is a new message. But that would be learning something completely new.
Another nice potential would be to use MVC's OutputCacheAttribute and use the SQL dependency option so your AJAX page could be cached and would only be a new request when a new chat message appears. Also you would want your controller to be an Asynchronous controller to help reduce the load on IIS.
Enjoy, optimization is always fun and very time consuming!

How does one do realtime updates of a web page?

Google's GMail service does it because it integrates Google Talk -- and Etherpad (now typewith.me) made famous the system which is used by, for example, Google Wave. All such systems update the page the user is working on effectively instantly when other users make changes to the page. It's easy to tell the server that a change has happened when it has happened, but it's more difficult to get clients to update themselves.
How does this kind of realtime editing work? Does it simply have the client ping the server tens of times per second for updates?
You can use Comet.
Asynchronous JavaScript and XML or AJAX
With Ajax, web applications can retrieve data from the server asynchronously in the background without interfering with the display and behavior of the existing page. The use of Ajax techniques has led to an increase in interactive or dynamic interfaces on web pages. Data is usually retrieved using the XMLHttpRequest object. Despite the name, the use of XML is not actually required, nor do the requests need to be asynchronous.
Just in case someone falls on that question.
Comet was an old way of doing real-time updates, now it has been made obsolete by technologies like websockets
I suggest using AJAX & jQuery for Asynchronous JS
http://api.jquery.com/category/ajax/
There are many options but basically i'd recommend you look into XMPP. i don't think i'm good enough to boil it down correctly, so i'll let a wiki talk for me
In fact, google voice and video uses it for these systems.
About AJAX, i think it's a communication channel, not a platform or a protocol for multiple person exchange. You could also answer "Use xml over http!" and still be at the same point :)
AFAIK, they use some form of AJAX. However, I would recommend you use the AJAX libraries via jQuery. AJAX is simplified a lot if you use jQuery to do it.
Javascript / Ajax allows you to send code to be executed on the client-side (that means, by the browser).
Now if you e.g. define a loop which checks for new messages on server every 5 seconds, you can update the web-page "in-real-time" (plus the time for the server to process the req and send response), or similar. A practical example would be the RoR Prototype periodically_call_remote Ajax helper.
Hope this helps!
As everyone says.. AJAX.
The client keeps on asking the server, after say 30 secs if there is anything new for it to do. Also, you can set the timeout value on an ajax request. keep the time out a bit high.. and the server replies whenever there is something new.
There is no way that the server can other wise ask the client to load some data.
If you are thinking of implementing something on the same lines, look up strophe.js which is an XMPP js-library
It can be done via POlling and Push design.
Polling is a client side information pulling technique after a given timeperiod.
Push technique involves the server to push the new updates to the client using websockets or new websocket like technology for example pusher.
Article

browser instant updates with ajax/jquery

I'm trying to reverse engineer how facebook handles their notifications, where when you get a message you get instantly notified via the browser.
I've fiddled with it for a little bit and realized that there is always a pending GET request "listening" if you will to some sort of update from the server. This appears to be some sort of observer pattern. I was just wondering if this pattern was documented somewhere.
The technique is actually called Long Polling. This is one of the popular Comet techniques to get around the limitations of traditional polling.
You may want to check out the following Stack Overflow post for a very simple example:
Simple “Long Polling” example code?
UPDATE:
In addition to the above, I suggest that you check out the accepted answer to the following Stack Overflow post for a detailed description of the technique:
How does facebook, gmail send the real time notification?
The technique is called Comet, aka 'server push'
There are currently 2 main ways of implementing comet.
1) As Daniel mentioned, long-polling, where you can use ajax to leave a hanging request to the browser that doesn't send the response back until the server decides to (whether it be based on someone else's actions or another server event).
2) The second approach, used by Google, is streaming. This involvs using ajax to leave a hanging request, but the response is never sent back to you, ever. Instead, the server updates bits of data and you use javascript to monitor changes, and fire events based on new data being pushed in. What happens is you get one very long continuous stream of data flowing in on a document that never closes, taking new data as it comes in.
HTML5 has a specification for a simpler way to do this with Web-Sockets. In the future, this type of live web-app will become commonplace as Web-Sockets are easy to use, but it is not supported on all browsers yet.
If you want to build a Comet site for production, you'll need to use a non-blocking I/O async server like one of the following.
http://www.tornadoweb.org/ - python
http://nodejs.org/ - server side javascript
-- or google for comet servers.
You'll need to know how to program for comet type apps on the server-side, as the javascript for Comet is pretty trivial, just your normal ajax calls with a couple event handlers.

AJAX and Client-Server Architecture with JavaScript

I have to program websites, but I rather don't like the static HTML nature. I prefer more of a client-server architecture.
Now I've figured, that with XMLhttp, you can basically dynamically update your page and send/request for information/action to/from a server. So this would basically cover the client area.
But to complete a client-server architecture, it is necessary for the server to send/request information, too, without being queried.
Is there any way, for example for a chat server, to send back a received message to all clients (the clients use a web browser) without that the clients have to query in a fixed interval? I want to implement that one can see while you type something in.
There are several different ways to accomplish this. Some of them are already answered here, but I wanted to include a few more as well as my thoughts on them.
1. Polling
Frequent requests are made to the server to check for new info. This is the worst way to do this, but probably the easiest. If your site will have a low number of users, it might be worth doing it this way.
This can be accomplished by using setInterval(myFunction, n) in javascript to send XMLHttpRequests to the server every n milliseconds. Then, on the server, you respond to this with your new info, when you have it, or some message that implies no new info.
2. Long Polling
When the page is loaded, it makes a request to the server for new info. The server holds the connection open until there is something to send back. This method reduces the amount of network traffic used, but increases the resources used on the server. You can use this for a small number of users, but it doesn't scale very well.
The easiest way to do this is to have the page that handles the AJAX request simply wait for new information to be available, then respond. This can tie up a lot connections on your server. So, use with care.
3. COMET
COMET is basically long polling, but the server is setup properly for it. It knows that these connections aren't "real" and it uses less resources to handle them. This is a great solution for this problem, but it requires that the server is explicitly setup for this purpose. There are COMET servers and COMET addins for other popular servers, but it will require some setup and sometimes some money.
Implementing this on .NET isn't the easiest thing in the world. You can pay for solutions, try to find someone else's code that does something similar, or try to write it yourself. I've not found any decent free solutions for this. If someone else has, please comment.
4. RIA
Another solution would be to include Flash, Silverlight, or Java Applet on your page. People often do this by using a 1x1 object so that they can use Flash or Silverlight to talk to the server. If you don't mind adding the dependency, this is a decent solution. If you already know Silverlight or Flash, it could be relatively simple to implement.
You can find tutorials on the internet for each of these options.
5. Web Sockets
If you are on the cutting edge, you can look into Web Sockets. It's only available in the latest builds of modern browsers. It was part of HTML5, but it might be its own spec now. Regardless, it means that older browsers won't be able to handle it. But, if you don't mind limiting yourself to the latest of browsers, you can use this amazing feature.
I believe that Chromium is the only browser that currently supports it. However, there is work being done to implement this in Firefox and WebKit.
I'll spare you the controversy and simply say that this does exactly what you want it to. The Abstract of the spec says it all.
This specification defines an API that enables Web pages to use the Web Sockets protocol for two-way communication with a remote host.
Special Mention
If you are interested in the world of Node JS, you can't go wrong with Socket IO. It will implement the best of whichever technology is available to the browser.
Conclusion
The best option is Socket.IO on Node JS. However, for an ASP.Net solution, go for COMET or Web Sockets, if you can. Otherwise, using Flash/Silverlight isn't terrible. Finally, polling and long polling should be last resorts. You could always support one of these, then fall back to another if there isn't support for it in the client's browser.
Yes, you can use COMET.
The client has to tell the server when the client-user begins typing. You've got a couple options here.
Frequent requests from the server for the latest activity. This would be taking place for each user involved in the chat. The same request could be used to send user-specific activity to the server as well: "Jonathan is typing..."
Long-polling. This essentially requests information from the server, and the server keeps the connection opened until it has something to send back. So your requests are minimized, but your connections stay opened longer.
Depending on your traffic, type of data being transmitted, server-environment, and many other factors, one of these options may shine more than the other.
You can use Silverlight for push notifications. Look at PollingDuplexHttpBinding. Since you are using ASP.Net MVC, adding Silverlight will be easy.
Look at this page for more information.
Based upon the REST architecture the html system is based upon, the servers role is to simply act as a resource for the client to pull from. I am generalizing but there are tools to implement this type of action on the client side, rather than on the server side.
You are better off writing/using a library that can request updates from the server periodically. You can encapsulate these types of requests in a javascript object that can fire events. This way your client side script can act like it's getting notified from the server. Review some common stuff with COMET you can probably find some tools to help you client side code.
HTML 5 has some tentative attempts at this type of functionality, but if you want your app to work on older browsers, your better off using more stable methods, like AJAX requested updates.

Categories

Resources