I'd like to somehow be able to define with JavaScript an onclickout event. That is something that happens when the user clicks anywhere else that the element in question.
I tried with onblur but it just don't seem to work :/
Is there any other way?
This uses the jQuery help, but the logic is the same if you prefer without it.
$(document).mouseup(function(event) {
var condition = $(event.target).parents(/* element_in_question */).length;
if (condition == 0) { // 0 means the event is not originated from the element in question
// Do what you need to do
}
}
});
document.getElementById('click').onclick = function(event) {
event.stopPropagation();
}
document.onclick = function() {
alert('click somewhere else');
}
jsFiddle.
This will send a click anywhere (except on #click) to the document.onclick handler, which will fire the alert().
You can set a variable, clickedin, on an element's click handler, and then have a click handler for the document that is checking if clickedin is true, and if it is, handle appropriately.
There may be a better way to accomplish the same end, though.
Related
Note: jQuery is not an option.
I want to detect a change in the state of a checkbox, but the onChange event doesn't seem to fire when I do this:
document.getElementById('myCheckBox').addEventListener('change',function() {
console.log('Changed!');
});
document.getElementById('someLink').onClick = function() {
// toggle checkbox
document.getElementById('myCheckBox').checked = !document.getElementById('myCheckBox').checked;
};
When I click #someLink the change event is not fired. I could add another listener to #myLink, but then if I add other links that check the same box I have to add more listeners. I want one listener for a checkbox change event. Again, jQuery is not an option, I need vanilla JS.
EDIT: Sorry if I did not make this more clear, but I want to avoid adding complexity to each link that will check this box. So ideally (and maybe the answer is that this is impossible) I don't want to have to alter the link/click logic at all. I want to be able to change the .checked property anywhere in the code and have it be detected without additional logic at each change (if possible).
UPDATE:
Okay so there is apparently no way to do this nicely without altering the onClick logic, so (like some kind of animal) I ended up brute forcing the problem as follows:
function mySentinel() {
if(document.getElementById('myCheckBox').checked) {
console.log("I've been checked!");
return;
}
setTimeout("mySentinel()",100);
}
// then call this somewhere in the on document load section...
mySentinel();
You can add some sort of timeout if you want also:
function mySentinel(var i) {
if(document.getElementById('myCheckBox').checked) {
console.log("I've been checked!");
return;
}
if(i <= 0) {
console.log("Time out. Still not checked");
}
i--;
setTimeout("mySentinel("+i+")",100);
}
// then call this somewhere in the on document load section...
// 60 second timeout (some math can make the argument look nicer)
mySentinel(600);
That is correct, changing the value or checked state of an input programatically does not fire the event handlers.
You'll have to trigger the event as well with javascript
document.getElementById('myCheckBox').addEventListener('change',function() {
console.log('Changed!');
});
document.getElementById('someLink').onclick = function() {
var box = document.getElementById('myCheckBox')
box.checked = !box.checked;
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", false, true);
box.dispatchEvent(evt);
} else {
box.fireEvent("onchange");
}
};
and note that's it's onclick (all lowercase)
FIDDLE
EDIT
I want to avoid adding complexity to each link that will check this box.
So ideally ... I don't want to have to alter the link/click logic at all.
I want to be able to change the .checked property anywhere in the code and have it be detected without additional logic at each change (if possible).
And that's not really possible, without using horrible hacks with intervals etc.
When the checked state is changed programatically the event handler isn't triggered at all, because that would really be a huge issue in most cases, and much harder to work around the opposite scenario, where you just trigger the event handler manually instead, and that is really the only way to do it.
Of course, you can make it a lot more convenient using classes and external function and such
document.getElementById('myCheckBox').addEventListener('change',function() {
console.log('Changed!');
});
var links = document.querySelectorAll('.someLinkClass');
for (var i = links.length; i--;) {
links[i].addEventListener('click', triggerChange, false);
}
function triggerChange() {
var box = document.getElementById('myCheckBox')
box.checked = !box.checked;
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", false, true);
box.dispatchEvent(evt);
} else {
box.fireEvent("onchange");
}
};
and anytime you add a link, you just add that class
Change the checkbox
Change the checkbox again
Change the checkbox even more
etc.
If you want to add more links that will trigger the checkbox, create a class name for them and use getElementByClass('classname')
Use onclick in your html, not js. Example: <div onclick="doSomething()"></div>
Just use an if/else statement for the check/uncheck:
if(document.getElementById('myCheck').checked){document.getElementById("myCheck").checked = false;} else{document.getElementById("myCheck").checked = true;}
I think jQuery have a change event. And you don't use it in the good way.
Read this page: http://api.jquery.com/change/
and this: jQuery checkbox change and click event
When any change occurs in the checkbox, jQuery event function is called. And then you can write anything in this event function
You can invoke/trigger an event but its not as easy as it seems, especially when you have to deal with internet explorer.
The cleanest solution is to put your event into its own function, then call it where you need it.
function handleEvent(){
console.log('Changed!');
}
documentent.getElementById('myCheckBox').addEventListener('change',function() {
handleEvent()
});
document.getElementById('someLink').onClick = function() {
// toggle checkbox
document.getElementById('myCheckBox').checked = !document.getElementById('myCheckBox').checked;
handleEvent();
};
I have an HTML button to which I attach an event, using jQuery's bind(), like so:
$('#mybutton').bind('click', myFirstHandlerFunction);
In myFirstHandlerFunction, I'd like this handler to replace itself with a new handler, mySecondHandlerFunction, like this:
function myFirstHandlerFunction(e) {
$(this).unbind('click', myFirstHandlerFunction).bind('click', mySecondHandlerFunction);
}
In the second click handler, mySecondHandlerFunction, I'd like to toggle the button back to its original state: unbind the mySecondHandlerFunction handler and reattach the original handler, myFirstHandlerFunction, like so:
function mySecondHandlerFunction(e) {
$(this).unbind('click', mySecondHandlerFunction).bind('click', myFirstHandlerFunction);
}
This works great, except for one small detail: because the click event has not yet propagated through each of the button's click handlers, the click event is passed on to the button's next click handler, which happens to be the handler that was just bound in the previous handler. The end result is mySecondHandlerFunction being executed immediately after myFirstHandlerFunction is executed.
This problem can be easily solved by calling e.stopPropagation() in each handler, but this has the negative side-effect of cancelling any other click handlers that may have been attached independently.
Is there a way to safely and and consistently toggle between two click handlers, without having to stop the propagation of the click event?
Update: Since this form of toggle() was removed in jQuery 1.9, the solution below does not work anymore. See this question for
alternatives.
It looks like toggle() would solve your problem:
$("#mybutton").toggle(myFirstHandlerFunction, mySecondHandlerFunction);
The code above will register myFirstHandlerFunction and mySecondHandlerFunction to be called on alternate clicks.
Just use a boolean to toggle the functionality of the handler, there's no need to juggle which handler is listening:
$('#mybutton').bind('click', myHandlerFunction);
var first = true;
function myHandlerFunction(e) {
if(first){
// Code from the first handler here;
}else{
// Code from the second handler here;
}
first = !first; // Invert `first`
}
This solution is a hack, but it is short and sweet for your rough work:
$('#myButton').click(function() {
(this.firstClk = !this.firstClk) ? firstHandler(): secondHandler();
});
It's a hack because it's putting a new property directly onto this which is the click-target HTML DOM element, and that's maybe not best practice. However, it thus avoids creates any new globals, and it can be used unchanged on different buttons simultaneously.
Note that the first part of the ternary operation uses = and not == or ===, i.e. it's an assignment, not a comparison. Note also that the first time the button is clicked, this.firstClk is undefined but is immediately negated, making the first part of the ternary operation evaluate to true the first time.
Here's a working version:
$('#a > button').click(function() {(this.firstClk = !this.firstClk) ? a1(): a2();});
$('#b > button').click(function() {(this.firstClk = !this.firstClk) ? b1(): b2();});
function a1() {$('#a > p').text('one');}
function a2() {$('#a > p').text('two');}
function b1() {$('#b > p').text('ONE');}
function b2() {$('#b > p').text('TWO');}
div {display: inline-block;width: 10em;}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="a"><p>not yet clicked</p><button>click</button></div>
<div id="b"><p>NOT YET CLICKED</p><button>CLICK</button></div>
I was looking at this today, and realized there was still not a way to do this without a global variable listed. I came up with the following to add locations to an ESRI basemap, but it would work generally too:
function addLocationClickHandler() {
var addLocationClick = overviewMap.on('click', function (event) {
addLocationClick.remove();
})
$('#locationAddButton').one('click', function (cancelEvent) {
addLocationClick.remove();
$('#locationAddButton').on('click', addLocationClickHandler)
});
}
$('#locationAddButton').on('click', addLocationClickHandler)
This should allow you to put something else in the section where you overwrite the click handler and not necessitate a global variable.
This would help add data-click-state attribute on your button
$(document).ready(function() {
$('#mybutton').on('click', function() {
if ($(this).attr('data-click-state') == 1) {
$(this).attr('data-click-state', 0)
myFirstHandlerFunction();
} else {
$(this).attr('data-click-state', 1)
mySecondHandlerFunction();
}
});
});
Like this:
$(this).bind('click', myMasterHandler);
handler = 0;
function myMasterHandler(e) {
if(handler == 0) {
myFirstHandler(e);
handler = 1;
} else {
mySecondHandler(e);
handler = 0;
}
}
I'm not exactly sure how to phrase this, so I couldn't search it. Basically, I have a keydown() bind on $(document). I'd like to show() another div, and have all keydown events be rerouted to this div and prevented from firing off in the document handler. Is this even possible, or would I have to put all my main keybindings on another div and work from there?
e.stopPropagation, or
e.preventDefault (depending on the situation)
Where e is the event.
Ex:
function onKeyDown(e) {
doStuff();
e.preventDefault();
}
e.preventDefault() will prevent the default behaviour of an event. What you need is to use
e.stopPropagation(), so that the event does not bubble up the DOM structure.
$(element).keydown(function(e) {
// do the task
// allow the default behaviour also
e.stopPropagation();
//^. BUT stop the even bubbling up right here
});
e.stopProgation(), can be bit confusing to grasp on the first but I created a demo with click event to explain it.
Hope it helps!!
Try:
$(document).on('keydown', function (evt) {
$('#foo').show().trigger(evt);
});
$('#foo').on('keydown', function (evt) {
console.log(evt);
return false; // this is very important. Without it, you'll get an endless loop.
});
demo: http://jsfiddle.net/Z7vYK/
The only way I can think of to even have a keydown event run on something other than an input or document, is to manually trigger it. You could have a global variable keep track of whether or not your div is showing, then trigger the event on your div accordingly.
Here's one such solution
HTML
Show div
<div id="hiddendiv"></div>
Javascript
var showing = false;
function showdiv()
{
showing = true;
$('#hiddendiv').show(200);
}
// Set up events on page ready
$(function() {
$(document).keydown(function(e) {
// If the div is showing, trigger it's keydown
// event and return
if(showing)
{
$('#hiddendiv').data('keydown_event', e).keydown();
return true;
}
alert('Document keydown! Keycode: ' + e.keyCode);
// Otherwise do the normal keydown stuff...
});
// Keydown for the hidden div
$('#hiddendiv').keydown(function() {
e = $(this).data('keydown_event');
alert('Hiddendiv keydown! Keycode: ' + e.keyCode);
// Make sure to stop propagation, or the events
// will loop for ever
e.stopPropagation();
return false;
});
});
As you can see, the #hiddendiv keydown event is being triggered by the document keydown event. I've also included a slight hack to get the event object to the hidden div using the jQuery data function.
Here's a demonstration of the code: http://jsfiddle.net/Codemonkey/DZecX/1/
I have two parts of scripts.
Part 1 :
$("mySelector").click(function() {
alert('you call me');
})
Part 2 :
$("mySelector").click(function() {
if(myCondition) {
//how can i prevent calling the first function from here ???
}
})
The whole problem, is that i have no access to part1. So i need to unbind the event allready specified in part 1, if myCondition is true, but otherwise i need to call the first function.
Thanks
UPDATE:
Thank you. I didn't know about stopImmediatePropagation(). But i feel, that there must be something like that :)
But actually in my case it doesn't work :(
Please have a look at my site
http://www.tours.am/en/outgoing/tours/%D5%80%D5%B6%D5%A4%D5%AF%D5%A1%D5%BD%D5%BF%D5%A1%D5%B6/Park-Hyatt-Goa/
Under the hotel description tab i have cloud carousel, when i click on not active image (not the front image), as you can see i'm consoling that i stopImmediatePropagation() there, but the event however calls :(
If your handler is registered first, then you can use event.stopImmediatePropagation like this:
$("mySelector").click(function(event) {
if(myCondition) {
event.stopImmediatePropagation();
}
})
Be aware that this will also stop event bubbling, so it will also prevent click handlers on parent elements from being invoked.
Update: If this does not work, then your handler is attached after the one you want to control. This is a problem that makes the solution much more difficult. I suggest seeing if you can bind "before the other guy", otherwise you will have to unbind the existing handler and then conditionally invoke it from within your own by retaining a reference to it. See jQuery find events handlers registered with an object.
No access:
$("#mySelector").click(function() {
alert('you call me');
})
Access:
var myCondition = true, //try false too
fFirstFunction = $("#mySelector").data("events").click[0].handler;
$("#mySelector").unbind("click");
$("#mySelector").click(function() {
if(myCondition) {
alert(myCondition);
} else {
$("#mySelector").click(fFirstFunction);
}
});
Look at this example
You can call
$('mySelector').unbind('click');
to get rid of all the click handlers. If your script is loaded after the other one (which appears to be the case), then that should do it. However note that it does unbind all "click" handlers, so make sure you call that before you add your own handler.
If you can't ensure your handler is attached first, try the following code:
var events = $('mySelector').data("events"); //all handlers bound to the element
var clickEvents = events ? events.click : null;//all click handlers bound to the element
$('mySelector').unbind('click'); //unbind all click handlers
//bind your handler
$("mySelector").click(function(e) {
if (myCondition) {
//do what you want
} else {
//call other handlers
if (clickEvents) {
for (var prop in clickEvents)
clickEvents[prop].call(this, e);
}
}
})
Update:
Above code is for jQuery 1.3.2
Above code is based on internal implementation of jQuery 1.3.2, so please check it carefully once you update jQuery.
return false;
-or-
event.preventDefault();
I stuck here with a little problem I have put pretty much time in which is pretty bad compared to its functionality.
I have tags in my DOM, and I have been binding several events to them with jQuery..
var a = $('<a>').click(data, function() { ... })
Sometimes I would like to disable some of these elements, which means I add a CSS-Class 'disabled' to it and I'd like to remove all events, so no events are triggered at all anymore. I have created a class here called "Button" to solve that
var button = new Button(a)
button.disable()
I can remove all events from a jQuery object with $.unbind. But I would also like to have the opposite feature
button.enable()
which binds all events with all handlers back to the element
OR
maybe there is a feature in jQuery that actually nows how to do that?!
My Button Class looks something similar to this:
Button = function(obj) {
this.element = obj
this.events = null
this.enable = function() {
this.element.removeClass('disabled')
obj.data('events', this.events)
return this
}
this.disable = function() {
this.element.addClass('disabled')
this.events = obj.data('events')
return this
}
}
Any ideas? Especially this rebind functionality must be available after disable -> enable
var a = $('<a>').click(data, function() { ... })
I found these sources that did not work for me:
http://jquery-howto.blogspot.com/2008/12/how-to-disableenable-element-with.html
http://forum.jquery.com/topic/jquery-temporarily-disabling-events
-> I am not setting the events within the button class
Appreciate your help.
$("a").click(function(event) {
event.preventDefault();
event.stopPropagation();
return false;
});
Returning false is very important.
Or you could write your own enable and disable functions that do something like:
function enable(element, event, eventHandler) {
if(element.data()[event].eventHandler && !eventHandler) { //this is pseudo code to check for null and undefined, you should also perform type checking
element.bind(event, element.data()[event]);
}
else (!element.data()[event] && eventHandler) {
element.bind(event, element.data()[event]);
element.data({event: eventHandler}); //We save the event handler for future enable() calls
}
}
function disable(element, event) {
element.unbind().die();
}
This isn't perfect code, but I'm sure you get the basic idea. Restore the old event handler from the element DOM data when calling enable. The downside is that you will have to use enable() to add any event listener that may need to be disable() d. Otherwise the event handler won't get saved in the DOM data and can't be restored with enable() again. Currently, there's no foolproof way to get a list of all event listeners on an element; this would make the job much easier.
I would go on this with different approach:
<a id="link1">Test function</a>
<a id="link2">Disable/enable function</a>
<script type="text/javascript">
$(function() {
// this needs to be placed before function you want to control with disabled flag
$("#link1").click(function(event) {
console.log("Fired event 1");
if ($(this).hasClass('disabled')) {
event.stopImmediatePropagation();
}
});
$("#link1").click(function() {
console.log("Fired event 2");
});
$("#link2").click(function() {
$("#link1").toggleClass("disabled");
});
});
</script>
This may not be what you require, since it may effect also other functions binded into this event later. The alternative may be to modify the functions itself to be more like:
$("#link1").click(function(event) {
console.log("Fired event 1");
if ($(this).hasClass('disabled')) {
return;
}
// do something here
});
if that is an option.
Instead of adding event handler to each element separately, you should use event delegation. It would make much more manageable structure.
http://www.sitepoint.com/javascript-event-delegation-is-easier-than-you-think/
http://cherny.com/webdev/70/javascript-event-delegation-and-event-hanlders
http://brandonaaron.net/blog/2010/03/4/event-delegation-with-jquery
This why you can just check for class(es) on clicked element , and act accordingly. And you will be able even to re-eanble them , jsut by changing the classes of a tag.
P.S. read the links carefully, so that you can explain it to others later. Event delegation is a very important technique.
You could use an <input type="button"> and then use $("#buttonID").addAttr('disabled', 'disabled'); and $("#buttonID").removeAttr('disabled');. Disabling and enabling will be handled by the browser. You can still restyle it to look like an anchor, if you need that, by removing backgrounds and borders for the button. Be aware though, that some margins and padding might still bugger u in some browsers.