I am trying to set up infinite-scroll on a site I am developing with Coldfusion, I am new to javascript and jquery so I am having some issues wrapping my head around all of this. Do I need to have pagination on my site in order to use the infinite-scroll plugin, or is there a way to do it with out it?
You do not need infinite scroll plug-in for this. To detect when scroll reaches end of page, with jQuery you can do
$(window).scroll(function () {
if ($(window).scrollTop() >= $(document).height() - $(window).height() - 10) {
//Add something at the end of the page
}
});
Demo on JsFiddle
I'm using Hussein's answer with AJAX requests. I modified the code to trigger at 300px instead of 10px, but it started causing my appends to multiply before the AJAX request was finished since the scroll call triggers much more frequently in a 300px range than a 10px range.
To fix this, I added a trigger that would be flipped on successful AJAX load. My code looks more like this:
var scrollLoad = true;
$(window).scroll(function () {
if (scrollLoad && $(window).scrollTop() >= $(document).height() - $(window).height() - 300) {
scrollLoad = false;
//Add something at the end of the page
}
});
then in my AJAX response, I set scrollLoad to true.
I built on top of Hussein's little example here to make a jQuery widget. It supports localStorage to temporarily save appended results and it has pause functionality to stop the appending every so often, requiring a click to continue.
Give it a try:
http://www.hawkee.com/snippet/9445/
$(function(){
$(window).scroll(function(){
if($(document).height()<=$(window).scrollTop()+$(window).height()+100){
alert('end of page');
}
});
});
Some one asked for explanation so here is the explanation
here $(document).height()-->is the height of the entire document.In most cases, this is equal to the element of the current document.
$(window).height()-->is the height of the window (browser) means height of whatever you are seeing on browser.
$(window).scrollTop()-->The Element.scrollTop property gets or sets the number of pixels that the content of an element is scrolled upward. An element's scrollTop is a measurement of the distance of an element's top to its topmost visible content. When an element content does not generate a vertical scrollbar, then its scrollTop value defaults to 0.
$(document).height()<=$(window).scrollTop()+$(window).height()+100
add $(window).scrollTop() with $(window).height() now check whether the result is equal to your documnet height or not. if it is equal means you reached at the end.we are adding 100 too because i want to check before the 100 pixels from the bottom of document(note <= in condition)
please correct me if i am wrong
I had same problem but didn't find suitable plugin for my need. so I wrote following code. this code appends template to element by getting data with ajax and pagination.
for detecting when user scrolls to bottom of div I used this condition:
var t = $("#infiniteContent").offset().top;
var h = $("#infiniteContent").height();
var ws = $(window).scrollTop();
var dh = $(document).height();
var wh = $(window).height();
if (dh - (wh + ws) < dh - (h + t)) {
//now you are at bottom of #infiniteContent element
}
$(document).ready(function(){
$.getJSON("https://jsonplaceholder.typicode.com/comments", { _page: 1, _limit:3 }, function (jsonre) {
appendTemplate(jsonre,1);
});
});
function appendTemplate(jsonre, pageNumber){
//instead of this code you can use a templating plugin like "Mustache"
for(var i =0; i<jsonre.length; i++){
$("#infiniteContent").append("<div class='item'><h2>"+jsonre[i].name+"</h2><p>"+jsonre[i].body+"</p></div>");
}
if (jsonre.length) {
$("#infiniteContent").attr("data-page", parseInt(pageNumber)+1);
$(window).on("scroll", initScroll);
//scroll event will not trigger if window size is greater than or equal to document size
var dh = $(document).height() , wh = $(window).height();
if(wh>=dh){
initScroll();
}
}
else {
$("#infiniteContent").attr("data-page", "");
}
}
function initScroll() {
var t = $("#infiniteContent").offset().top;
var h = $("#infiniteContent").height();
var ws = $(window).scrollTop();
var dh = $(document).height();
var wh = $(window).height();
if (dh - (wh + ws) < dh - (h + t)) {
$(window).off('scroll');
var p = $("#infiniteContent").attr("data-page");
if (p) {
$.getJSON("https://jsonplaceholder.typicode.com/comments", { _page: p, _limit:3 }, function (jsonre) {
appendTemplate(jsonre, p);
});
}
}
}
<script src="https://code.jquery.com/jquery-3.2.1.min.js"></script>
<div id="infiniteContent"></div>
If you have a scrollable element, like a div with scroll overflow, but no scrollable document/page, you can take this way.
$(function () {
var s = $(".your-scrollable-element");
var list = $("#your-table-list");
/* On element scroll */
s.scroll(function () {
/* The scroll top plus element height equals to table height */
if ((s.scrollTop() + s.height()) == list.height()) {
/* you code */
}
});
});
I wrote this function using Hussein and Nick's ideas, but I wanted it to use promises for the callback. I also wanted the infinite scrolling area to be on a fixed div and not just the window if the div is sent into the options object. There is an example of that in my second link below. I suggest using a promise library like Q if you want to support older browsers. The cb method may or may not be a promise and it will work regardless.
It is used like so:
html
<div id="feed"></div>
js
var infScroll = infiniteScroll({
cb: function () {
return doSomethingPossiblyAnAJAXPromise();
}
});
If you want the feed to temporarily stop you can return false in the cb method. Useful if you have hit the end of the feed. It can be be started again by calling the infiniteScroll's returned object method 'setShouldLoad' and passing in true and example to go along with the above code.
infScroll.setShouldLoad(true);
The function for infinite scrolling is this
function infiniteScroll (options) {
// these options can be overwritten by the sent in options
var defaultOptions = {
binder: $(window), // parent scrollable element
loadSpot: 300, //
feedContainer: $("#feed"), // container
cb: function () { },
}
options = $.extend(defaultOptions, options);
options.shouldLoad = true;
var returnedOptions = {
setShouldLoad: function (bool) { options.shouldLoad = bool; if(bool) { scrollHandler(); } },
};
function scrollHandler () {
var scrollTop = options.binder.scrollTop();
var height = options.binder[0].innerHeight || options.binder.height();
if (options.shouldLoad && scrollTop >= (options.binder[0].scrollHeight || $(document).height()) - height - options.loadSpot) {
options.shouldLoad = false;
if(typeof options.cb === "function") {
new Promise(function (resolve) {resolve();}).then(function() { return options.cb(); }).then(function (isNotFinished) {
if(typeof isNotFinished === "boolean") {
options.shouldLoad = isNotFinished;
}
});
}
}
}
options.binder.scroll(scrollHandler);
scrollHandler();
return returnedOptions;
}
1 feed example with window as scroller
2 feed example with feed as scroller
Related
I have a working bottom function in JavaScript to detect if the user scrolls at the bottom. However, a problem comes when the user has a strange resolution (like windows scale) or when you zoom. The function is not working anymore and can't detect the bottom.
Here is what I did :
const bottom = e.target.scrollHeight - e.target.scrollTop === e.target.clientHeight;
if (bottom) {
this.props.getNewValues();
}
Is there a way to avoid that? Even when you don't zoom, this is not working for people displaying the site on a TV or something like this (like a friend of mine did)
Thanks you
EDIT : I'm applying this on a precise element and I repeat that my solution is working except by unzooming. Unzooming provides float values that made the response not really accurate (it goes from 1 to 50px of difference based on the zoom made)
I use this function (can't take credit as someone else wrote it - sorry for no credit - it was ages ago). Maybe you can adapt this to your use case:
(function($) {
//CHECK SCROLLED INTO VIEW UTIL
function Utils() {
}
Utils.prototype = {
constructor: Utils,
isElementInView: function (element, fullyInView) {
var pageTop = $(window).scrollTop();
var pageBottom = pageTop + $(window).height();
var elementTop = $(element).offset().top;
var elementBottom = elementTop + $(element).height();
if (fullyInView === true) {
return ((pageTop < elementTop) && (pageBottom > elementBottom));
} else {
return ((elementTop <= pageBottom) && (elementBottom >= pageTop));
}
}
};
var Utils = new Utils();
//END CHECK SCROLLED INTO VIEW UTIL
//USING THE ELEMENT IN VIEW UTIL
//this function tells what to do do when the element is or isnt in view.
//var inView = Utils.isElementInView(el, false); Where FALSE means the element doesnt need to be completely in view / TRUE would mean the element needs to be completely in view
function IsEInView(el) {
var inView = Utils.isElementInView(el, false);
if(inView) {
//console.log('in view');
} else {
//console.log('not in view');
}
};
//Check to make sure the element you want to be sure is visible is present on the page
var variableOfYourElement = $('#variableOfYourElement');
//if it is on this page run the function that checks to see if it is partially or fully in view
if( variableOfYourElement.length ) {
//run function on page load
IsEInView(variableOfYourElement);
//run function if the element scrolls into view
$(window).scroll(function(){
IsEInView(variableOfYourElement);
});
}
//END USING THE ELEMENT IN VIEW UTIL
})(jQuery);
I am using the Jquery inview plugin and I am trying to load some elements whenever the user reached the footer of the page. While doing this, I discovered a bug where if the user holds the scroll-click and drags the mouse towards the bottom, in some cases the elements will not load anymore until the footer is out of the view and then back into the view.
Here is the function that I have so far to load the elements when the footer is in the viewport:
//Infinite load function. Uses jquery.inview
$scope.addMoreElements = function(){
$scope.limitElementsPerPage += 16;
$('.footer').on('inview', function(event, isInView) {
if (isInView) {
// element is now visible in the viewport
$scope.limitElementsPerPage += 16;
} else {
// element has gone out of viewport
//do nothing
}
});
};
I am using Angularjs as well as jQuery for this project. Essentially, what I think I need is something that checks at about 1-2 seconds if the element is still in view. I am not exactly sure I should do this at the moment. This is what I tried to do to solve this issue:
$scope.$watch($('.footer'), function(){
$('.footer').on('inview', function(event, isInView) {
setTimeout(function(){
while(isInView){
console.log('test')
}
}, 1000);
});
});
This unfortunately, will crash the browser (I am not sure how I would go about doing this with the setTimeout or the other related functions).
Any help or ideas on how to do this would be greatly appreciated.
Thank you in advance.
InView adds a new event for elements, that triggers when the element enters the viewport. Probably some times you just have the footer in the viewport at all times, so that is why it fails.
I think you need to redesign the logic of the page to use the 'scroll' event on whatever element contains the added items and scrolls for the infinite view and in that event to check if the footer is in the viewport, not if it enters.
Personally I use this extension for checking if it is in the viewport:
(function($) {
$.inviewport = function(element, settings) {
var wh=$(window).height();
var wst=$(window).scrollTop();
var et=$(element).offset().top;
var eh=$(element).height();
return !(wh + wst <= et)&&!(wst >= et + eh);
};
$.extend($.expr[':'], {
"in-viewport": function(a, i, m) {
return $.inviewport(a);
}
});
})(jQuery);
Here are couple of functions you can use:
var getScrollY = function(){
var supportPageOffset = window.pageXOffset !== undefined;
var isCSS1Compat = ((document.compatMode || "") === "CSS1Compat");
var y = supportPageOffset ? window.pageYOffset : isCSS1Compat ?
document.documentElement.scrollTop : document.body.scrollTop;
return y;
}
function get_elem_y( elem ) {
var box = elem.getBoundingClientRect();
return box.top + getScrollY();
}
And then you can listen to the scroll event, assume footer is something like <div id="footer">...</div>
var footer = document.getElementById("footer"); // get footer
var b_foot_visible = false;
window.addEventListener("scroll", function() {
var y = get_elem_y(footer);
var pageHeight = ( window.innerHeight || document.body.clientHeight);
if((getScrollY() + pageHeight) > y ) {
// footer is visible
if(!b_foot_visible) {
// TODO: add something
b_foot_visible = true;
}
} else {
// footer is not visible
if(b_foot_visible) {
// TODO: remove something
b_foot_visible = false;
}
}
});
Thus, when the scrollY + pages height reaches the footer elements Y coordinate you can do something to display things for the footer.
You might also add check in the beginning to test if the footer is already visible.
I am rather new to jquery and i'm trying to find the right offset for a div element inside the body. I want to make this div element sticky whenever I scroll down and pass the top offset of this element.
I followed this tutorial: https://www.youtube.com/watch?v=utonytGKodc and it works but I have a metaslider in my header and the width/height of this element is left out of the calculations to find the right offset....
the result is that my element becomes a sticky element way to soon, is there a way I can manualy add the sliders coordinates (offset) to the offset calculation of the element i want to make sticky?
var offerteOffset = jQuery(".agendawrap").offset().top //+ metaslider coordinates??;
alert(offerteOffset);
jQuery(window).scroll(function() {
var scrollPos = jQuery(window).scrollTop();
if (scrollPos >= offerteOffset) {
jQuery(".agendawrap").addClass("fixed");
} else {
jQuery(".agendawrap").removeClass("fixed");
}
});
I cant believe people make such bad tutorials.
First of all: dont write jQuery all the time. Have a look at this thread.
Basically it says: use an invoking function with an own scope:
(function($) { /* all your jQuery goes here */ })(jQuery);
So you can just type $ instead of jQuery.
To your original question:
(function($) {
$(function() { // document ready...
var scrollTolerance = 50,
agendawrap = $(".agendawrap"),
offerteOffset = agendawrap.offset().top;
$(window).on('scroll', function() {
var scrollPos = $(window).scrollTop();
// OR: if (scrollPos - scrollTolerance >= offerteOffset) {
if (scrollPos + scrollTolerance >= offerteOffset) {
agendawrap.addClass("fixed");
}
else {
agendawrap.removeClass("fixed");
}
});
});
})(jQuery);
I am trying to implement synchronized scrolling for two DIV with the following code.
DEMO
$(document).ready(function() {
$("#div1").scroll(function () {
$("#div2").scrollTop($("#div1").scrollTop());
});
$("#div2").scroll(function () {
$("#div1").scrollTop($("#div2").scrollTop());
});
});
#div1 and #div2 is having the very same content but different sizes, say
#div1 {
height : 800px;
width: 600px;
}
#div1 {
height : 400px;
width: 200px;
}
With this code, I am facing two issues.
1) Scrolling is not well synchronized, since the divs are of different sizes. I know, this is because, I am directly setting the scrollTop value. I need to find the percentage of scrolled content and calculate corresponding scrollTop value for the other div. I am not sure, how to find the actual height and current scroll position.
2) This issue is only found in firefox. In firefox, scrolling is not smooth as in other browsers. I think this because the above code is creating a infinite loop of scroll events.
I am not sure, why this is only happening with firefox. Is there any way to find the source of scroll event, so that I can resolve this issue.
Any help would be greatly appreciated.
You can use element.scrollTop / (element.scrollHeight - element.offsetHeight) to get the percentage (it'll be a value between 0 and 1). So you can multiply the other element's (.scrollHeight - .offsetHeight) by this value for proportional scrolling.
To avoid triggering the listeners in a loop you could temporarily unbind the listener, set the scrollTop and rebind again.
var $divs = $('#div1, #div2');
var sync = function(e){
var $other = $divs.not(this).off('scroll'), other = $other.get(0);
var percentage = this.scrollTop / (this.scrollHeight - this.offsetHeight);
other.scrollTop = percentage * (other.scrollHeight - other.offsetHeight);
// Firefox workaround. Rebinding without delay isn't enough.
setTimeout( function(){ $other.on('scroll', sync ); },10);
}
$divs.on( 'scroll', sync);
http://jsfiddle.net/b75KZ/5/
Runs like clockwork (see DEMO)
$(document).ready(function(){
var master = "div1"; // this is id div
var slave = "div2"; // this is other id div
var master_tmp;
var slave_tmp;
var timer;
var sync = function ()
{
if($(this).attr('id') == slave)
{
master_tmp = master;
slave_tmp = slave;
master = slave;
slave = master_tmp;
}
$("#" + slave).unbind("scroll");
var percentage = this.scrollTop / (this.scrollHeight - this.offsetHeight);
var x = percentage * ($("#" + slave).get(0).scrollHeight - $("#" + slave).get(0).offsetHeight);
$("#" + slave).scrollTop(x);
if(typeof(timer) !== 'undefind')
clearTimeout(timer);
timer = setTimeout(function(){ $("#" + slave).scroll(sync) }, 200)
}
$('#' + master + ', #' + slave).scroll(sync);
});
This is what I'm using. Just call the syncScroll(...) function with the two elements you want to synchronize. I found pawel's solution had issues with continuing to slowly scroll after the mouse or trackpad was actually done with the operation.
See working example here.
// Sync up our elements.
syncScroll($('.scroll-elem-1'), $('.scroll-elem-2'));
/***
* Synchronize Scroll
* Synchronizes the vertical scrolling of two elements.
* The elements can have different content heights.
*
* #param $el1 {Object}
* Native DOM element or jQuery selector.
* First element to sync.
* #param $el2 {Object}
* Native DOM element or jQuery selector.
* Second element to sync.
*/
function syncScroll(el1, el2) {
var $el1 = $(el1);
var $el2 = $(el2);
// Lets us know when a scroll is organic
// or forced from the synced element.
var forcedScroll = false;
// Catch our elements' scroll events and
// syncronize the related element.
$el1.scroll(function() { performScroll($el1, $el2); });
$el2.scroll(function() { performScroll($el2, $el1); });
// Perform the scroll of the synced element
// based on the scrolled element.
function performScroll($scrolled, $toScroll) {
if (forcedScroll) return (forcedScroll = false);
var percent = ($scrolled.scrollTop() /
($scrolled[0].scrollHeight - $scrolled.outerHeight())) * 100;
setScrollTopFromPercent($toScroll, percent);
}
// Scroll to a position in the given
// element based on a percent.
function setScrollTopFromPercent($el, percent) {
var scrollTopPos = (percent / 100) *
($el[0].scrollHeight - $el.outerHeight());
forcedScroll = true;
$el.scrollTop(scrollTopPos);
}
}
If the divs are of equal sizes then this code below is a simple way to scroll them synchronously:
scroll_all_blocks: function(e) {
var scrollLeft = $(e.target)[0].scrollLeft;
var len = $('.scroll_class').length;
for (var i = 0; i < len; i++)
{
$('.scroll_class')[i].scrollLeft = scrollLeft;
}
}
Here im using horizontal scroll, but you can use scrollTop here instead. This function is call on scroll event on the div, so the e will have access to the event object.
Secondly, you can simply have the ratio of corresponding sizes of the divs calculated to apply in this line $('.scroll_class')[i].scrollLeft = scrollLeft;
I solved the sync scrolling loop problem by setting the scroll percentage to fixed-point notation: percent.toFixed(0), with 0 as the parameter. This prevents mismatched fractional scrolling heights between the two synced elements, which are constantly trying to "catch up" with each other. This code will let them catch up after at most a single extra step (i.e., the second element may continue to scroll an extra pixel after the user stops scrolling). Not a perfect solution or the most sophisticated, but certainly the simplest I could find.
var left = document.getElementById('left');
var right = document.getElementById('right');
var el2;
var percentage = function(el) { return (el.scrollTop / (el.scrollHeight - el.offsetHeight)) };
function syncScroll(el1) {
el1.getAttribute('id') === 'left' ? el2 = right : el2 = left;
el2.scrollTo( 0, (percentage(el1) * (el2.scrollHeight - el2.offsetHeight)).toFixed(0) ); // toFixed(0) prevents scrolling feedback loop
}
document.getElementById('left').addEventListener('scroll',function() {
syncScroll(this);
});
document.getElementById('right').addEventListener('scroll',function() {
syncScroll(this);
});
I like pawel's clean solution but it lacks something I need and has a strange scrolling bug where it continues to scroll and my plugin will work on multiple containers not just two.
http://www.xtf.dk/2015/12/jquery-plugin-synchronize-scroll.html
Example & demo: http://trunk.xtf.dk/Project/ScrollSync/
Plugin: http://trunk.xtf.dk/Project/ScrollSync/jquery.scrollSync.js
$('.scrollable').scrollSync();
If you don't want proportional scrolling, but rather to scroll an equal amount of pixels on each field, you could add the value of change to the current value of the field you're binding the scroll-event to.
Let's say that #left is the small field, and #right is the bigger field.
var oldRst = 0;
$('#right').on('scroll', function () {
l = $('#left');
var lst = l.scrollTop();
var rst = $(this).scrollTop();
l.scrollTop(lst+(rst-oldRst)); // <-- like this
oldRst = rst;
});
https://jsfiddle.net/vuvgc0a8/1/
By adding the value of change, and not just setting it equal to #right's scrollTop(), you can scroll up or down in the small field, regardless of its scrollTop() being less than the bigger field. An example of this is a user page on Facebook.
This is what I needed when I came here, so I thought I'd share.
From the pawel solution (first answer).
For the horizzontal synchronized scrolling using jQuery this is the solution:
var $divs = $('#div1, #div2'); //only 2 divs
var sync = function(e){
var $other = $divs.not(this).off('scroll');
var other = $other.get(0);
var percentage = this.scrollLeft / (this.scrollWidth - this.offsetWidth);
other.scrollLeft = percentage * (other.scrollWidth - other.offsetWidth);
setTimeout( function(){ $other.on('scroll', sync ); },10);
}
$divs.on('scroll', sync);
JSFiddle
An other solution for multiple horizontally synchronized divs is this, but it works for divs with same width.
var $divs = $('#div1, #div2, #div3'); //multiple divs
var sync = function (e) {
var me = $(this);
var $other = $divs.not(me).off('scroll');
$divs.not(me).each(function (index) {
$(this).scrollLeft(me.scrollLeft());
});
setTimeout(function () {
$other.on('scroll', sync);
}, 10);
}
$divs.on('scroll', sync);
NB: Only for divs with same width
JSFiddle
Just wondering if anyone has an idea as to how I might re-create a nav bar style that I saw a while ago, I just found the site I saw it on, but am not sure how they might have gotten there. Basically want it to scroll with the page then lock to the top...
http://lesscss.org/
Just do a quick "view source" on http://lesscss.org/ and you'll see this:
window.onscroll = function () {
if (!docked && (menu.offsetTop - scrollTop() < 0)) {
menu.style.top = 0;
menu.style.position = 'fixed';
menu.className = 'docked';
docked = true;
} else if (docked && scrollTop() <= init) {
menu.style.position = 'absolute';
menu.style.top = init + 'px';
menu.className = menu.className.replace('docked', '');
docked = false;
}
};
They're binding to the onscroll event for the window, this event is triggered when the window scrolls. The docked flag is set to true when the menu is "locked" to the top of the page, the menu is set to position:fixed at the same time that that flag is set to true. The rest is just some simple "are we about to scroll the menu off the page" and "are we about back where we started" position checking logic.
You have to be careful with onscroll events though, they can fire a lot in rapid succession so your handler needs to be pretty quick and should precompute as much as possible.
In jQuery, it would look pretty much the same:
$(window).scroll(function() {
// Pretty much the same as what's on lesscss.org
});
You see this sort of thing quite often with the "floating almost fixed position vertical toolbar" things such as those on cracked.com.
mu is too short answer is working, I'm just posting this to give you the jquery script!
var docked = false;
var menu = $('#menu');
var init = menu.offset().top;
$(window).scroll(function()
{
if (!docked && (menu.offset().top - $("body").scrollTop() < 0))
{
menu.css({
position : "fixed",
top: 0,
});
docked = true;
}
else if(docked && $("body").scrollTop() <= init)
{
menu.css({
position : "absolute",
top: init + 'px',
});
docked = false;
}
});
Mu's answer got me far. I tried my luck with replicationg lesscss.org's approach but ran into issues on browser resizing and zooming. Took me a while to find out how to react to that properly and how to reset the initial position (init) without jQuery or any other library.
Find a preview on JSFiddle: http://jsfiddle.net/ctietze/zeasg/
So here's the plain JavaScript code in detail, just in case JSFiddle refuses to work.
Reusable scroll-then-snap menu class
Here's a reusable version. I put the scrolling checks into a class because the helper methods involved cluttered my main namespace:
var windowScrollTop = function () {
return window.pageYOffset;
};
var Menu = (function (scrollOffset) {
var Menu = function () {
this.element = document.getElementById('nav');
this.docked = false;
this.initialOffsetTop = 0;
this.resetInitialOffsetTop();
}
Menu.prototype = {
offsetTop: function () {
return this.element.offsetTop;
},
resetInitialOffsetTop: function () {
this.initialOffsetTop = this.offsetTop();
},
dock: function () {
this.element.className = 'docked';
this.docked = true;
},
undock: function () {
this.element.className = this.element.className.replace('docked', '');
this.docked = false;
},
toggleDock: function () {
if (this.docked === false && (this.offsetTop() - scrollOffset() < 0)) {
this.dock();
} else if (this.docked === true && (scrollOffset() <= this.initialOffsetTop)) {
this.undock();
}
}
};
return Menu;
})(windowScrollTop);
var menu = new Menu();
window.onscroll = function () {
menu.toggleDock();
};
Handle zoom/page resize events
var updateMenuTop = function () {
// Shortly dock to reset the initial Y-offset
menu.undock();
menu.resetInitialOffsetTop();
// If appropriate, undock again based on the new value
menu.toggleDock();
};
var zoomListeners = [updateMenuTop];
(function(){
var w = window,
d = document,
e = d.documentElement,
g = d.getElementsByTagName('body')[0];
var lastWidth = 0;
function pollZoomFireEvent() {
var widthNow = w.innerWidth || e.clientWidth || g.clientWidth;
if (lastWidth == widthNow) {
return;
}
lastWidth = widthNow;
// Length changed, user must have zoomed, invoke listeners.
for (i = zoomListeners.length - 1; i >= 0; --i) {
zoomListeners[i]();
}
}
setInterval(pollZoomFireEvent, 100);
})();
Sounds like an application of Jquery ScrollTop and some manipulation of CSS properties of the navbar element. So for example, under certain scroll conditions the navbar element is changed from absolute positioning with calculated co-ordinates to fixed positioning.
http://api.jquery.com/scrollTop/
The effect you describe would usually start with some type of animation, like in TheDeveloper's answer. Default animations typically slide an element around by changing its position over time or fade an element in/out by changing its opacity, etc.
Getting the "bouce back" or "snap to" effect usually involves easing. All major frameworks have some form of easing available. It's all about personal preference; you can't really go wrong with any of them.
jQuery has easing plugins that you could use with the .animate() function, or you can use jQueryUI.
MooTools has easing built in to the FX class of the core library.
Yahoo's YUI also has easing built in.
If you can remember what site it was, you could always visit it again and take a look at their source to see what framework and effect was used.