Replacing Characters other than numbers in textbox - javascript

I want to allow only numbers(1 to 5), a $(dollar) .(decimal) and '(singlequote) in a textbox. I want to do this on keyup event. If user types anything other than these character, it should be replaced with a *. Please tell how can I do it?

You can strip the string on key-up like this:
$('input[type=text]').keyup(function(){
$(this).val($(this).val().replace(/[^1-5$.']/g, '*'));
});
Keep in mind that you should verify this on the server side (there are a plethora of ways around it on the client side).

Related

Partial matching a string against a regex

Suppose that I have this regular expression: /abcd/
Suppose that I wanna check the user input against that regex and disallow entering invalid characters in the input. When user inputs "ab", it fails as an match for the regex, but I can't disallow entering "a" and then "b" as user can't enter all 4 characters at once (except for copy/paste). So what I need here is a partial match which checks if an incomplete string can be potentially a match for a regex.
Java has something for this purpose: .hitEnd() (described here http://glaforge.appspot.com/article/incomplete-string-regex-matching) python doesn't do it natively but has this package that does the job: https://pypi.python.org/pypi/regex.
I didn't find any solution for it in js. It's been asked years ago: Javascript RegEx partial match
and even before that: Check if string is a prefix of a Javascript RegExp
P.S. regex is custom, suppose that the user enters the regex herself and then tries to enter a text that matches that regex. The solution should be a general solution that works for regexes entered at runtime.
Looks like you're lucky, I've already implemented that stuff in JS (which works for most patterns - maybe that'll be enough for you). See my answer here. You'll also find a working demo there.
There's no need to duplicate the full code here, I'll just state the overall process:
Parse the input regex, and perform some replacements. There's no need for error handling as you can't have an invalid pattern in a RegExp object in JS.
Replace abc with (?:a|$)(?:b|$)(?:c|$)
Do the same for any "atoms". For instance, a character group [a-c] would become (?:[a-c]|$)
Keep anchors as-is
Keep negative lookaheads as-is
Had JavaScript have more advanced regex features, this transformation may not have been possible. But with its limited feature set, it can handle most input regexes. It will yield incorrect results on regex with backreferences though if your input string ends in the middle of a backreference match (like matching ^(\w+)\s+\1$ against hello hel).
As many have stated there is no standard library, fortunately I have written a Javascript implementation that does exactly what you require. With some minor limitation it works for regular expressions supported by Javascript.
see: incr-regex-package.
Further there is also a react component that uses this capability to provide some useful capabilities:
Check input as you type
Auto complete where possible
Make suggestions for possible input values
Demo of the capabilities Demo of use
I think that you have to have 2 regex one for typing /a?b?c?d?/ and one for testing at end while paste or leaving input /abcd/
This will test for valid phone number:
const input = document.getElementById('input')
let oldVal = ''
input.addEventListener('keyup', e => {
if (/^\d{0,3}-?\d{0,3}-?\d{0,3}$/.test(e.target.value)){
oldVal = e.target.value
} else {
e.target.value = oldVal
}
})
input.addEventListener('blur', e => {
console.log(/^\d{3}-?\d{3}-?\d{3}-?$/.test(e.target.value) ? 'valid' : 'not valid')
})
<input id="input">
And this is case for name surname
const input = document.getElementById('input')
let oldVal = ''
input.addEventListener('keyup', e => {
if (/^[A-Z]?[a-z]*\s*[A-Z]?[a-z]*$/.test(e.target.value)){
oldVal = e.target.value
} else {
e.target.value = oldVal
}
})
input.addEventListener('blur', e => {
console.log(/^[A-Z][a-z]+\s+[A-Z][a-z]+$/.test(e.target.value) ? 'valid' : 'not valid')
})
<input id="input">
This is the hard solution for those who think there's no solution at all: implement the python version (https://bitbucket.org/mrabarnett/mrab-regex/src/4600a157989dc1671e4415ebe57aac53cfda2d8a/regex_3/regex/_regex.c?at=default&fileviewer=file-view-default) in js. So it is possible. If someone has simpler answer he'll win the bounty.
Example using python module (regular expression with back reference):
$ pip install regex
$ python
>>> import regex
>>> regex.Regex(r'^(\w+)\s+\1$').fullmatch('abcd ab',partial=True)
<regex.Match object; span=(0, 7), match='abcd ab', partial=True>
You guys would probably find this page of interest:
(https://github.com/desertnet/pcre)
It was a valiant effort: make a WebAssembly implementation that would support PCRE. I'm still playing with it, but I suspect it's not practical. The WebAssembly binary weighs in at ~300K; and if your JS terminates unexpectedly, you can end up not destroying the module, and consequently leaking significant memory.
The bottom line is: this is clearly something the ECMAscript people should be formalizing, and browser manufacturers should be furnishing (kudos to the WebAssembly developer into possibly shaming them to get on the stick...)
I recently tried using the "pattern" attribute of an input[type='text'] element. I, like so many others, found it to be a letdown that it would not validate until a form was submitted. So a person would be wasting their time typing (or pasting...) numerous characters and jumping on to other fields, only to find out after a form submit that they had entered that field wrong. Ideally, I wanted it to validate field input immediately, as the user types each key (or at the time of a paste...)
The trick to doing a partial regex match (until the ECMAscript people and browser makers get it together with PCRE...) is to not only specify a pattern regex, but associated template value(s) as a data attribute. If your field input is shorter than the pattern (or input.maxLength...), it can use them as a suffix for validation purposes. YES -this will not be practical for regexes with complex case outcomes; but for fixed-position template pattern matching -which is USUALLY what is needed- it's fine (if you happen to need something more complex, you can build on the methods shown in my code...)
The example is for a bitcoin address [ Do I have your attention now? -OK, not the people who don't believe in digital currency tech... ] The key JS function that gets this done is validatePattern. The input element in the HTML markup would be specified like this:
<input id="forward_address"
name="forward_address"
type="text"
maxlength="90"
pattern="^(bc(0([ac-hj-np-z02-9]{39}|[ac-hj-np-z02-9]{59})|1[ac-hj-np-z02-9]{8,87})|[13][a-km-zA-HJ-NP-Z1-9]{25,34})$"
data-entry-templates="['bc099999999999999999999999999999999999999999999999999999999999','bc1999999999999999999999999999999999999999999999999999999999999999999999999999999999999999','19999999999999999999999999999999999']"
onkeydown="return validatePattern(event)"
onpaste="return validatePattern(event)"
required
/>
[Credit goes to this post: "RegEx to match Bitcoin addresses?
" Note to old-school bitcoin zealots who will decry the use of a zero in the regex here -it's just an example for accomplishing PRELIMINARY validation; the server accepting the address passed off by the browser can do an RPC call after a form post, to validate it much more rigorously. Adjust your regex to suit.]
The exact choice of characters in the data-entry-template was a bit arbitrary; but they had to be ones such that if the input being typed or pasted by the user is still incomplete in length, it will use them as an optimistic stand-in and the input so far will still be considered valid. In the example there, for the last of the data-entry-templates ('19999999999999999999999999999999999'), that was a "1" followed by 39 nines (seeing as how the regex spec "{25,39}" dictates that a maximum of 39 digits in the second character span/group...) Because there were two forms to expect -the "bc" prefix and the older "1"/"3" prefix- I furnished a few stand-in templates for the validator to try (if it passes just one of them, it validates...) In each template case, I furnished the longest possible pattern, so as to insure the most permissive possibility in terms of length.
If you were generating this markup on a dynamic web content server, an example with template variables (a la django...) would be:
<input id="forward_address"
name="forward_address"
type="text"
maxlength="{{MAX_BTC_ADDRESS_LENGTH}}"
pattern="{{BTC_ADDRESS_REGEX}}" {# base58... #}
data-entry-templates="{{BTC_ADDRESS_TEMPLATES}}" {# base58... #}
onkeydown="return validatePattern(event)"
onpaste="return validatePattern(event)"
required
/>
[Keep in mind: I went to the deeper end of the pool here. You could just as well use this for simpler patterns of validation.]
And if you prefer to not use event attributes, but to transparently hook the function to the element's events at document load -knock yourself out.
You will note that we need to specify validatePattern on three events:
The keydown, to intercept delete and backspace keys.
The paste (the clipboard is pasted into the field's value, and if it works, it accepts it as valid; if not, the paste does not transpire...)
Of course, I also took into account when text is partially selected in the field, dictating that a key entry or pasted text will replace the selected text.
And here's a link to the [dependency-free] code that does the magic:
https://gitlab.com/osfda/validatepattern.js
(If it happens to generate interest, I'll integrate constructive and practical suggestions and give it a better readme...)
PS: The incremental-regex package posted above by Lucas Trzesniewski:
Appears not to have been updated? (I saw signs that it was undergoing modification??)
Is not browserified (tried doing that to it, to kick the tires on it -it was a module mess; welcome anyone else here to post a browserified version for testing. If it works, I'll integrate it with my input validation hooks and offer it as an alternative solution...) If you succeed in getting it browserfied, maybe sharing the exact steps that were needed would also edify everyone on this post. I tried using the esm package to fix version incompatibilities faced by browserify, but it was no go...
I strongly suspect (although I'm not 100% sure) that general case of this problem has no solution the same way as famous Turing's "Haltin problem" (see Undecidable problem). And even if there is a solution, it most probably will be not what users actually want and thus depending on your strictness will result in a bad-to-horrible UX.
Example:
Assume "target RegEx" is [a,b]*c[a,b]* also assume that you produced a reasonable at first glance "test RegEx" [a,b]*c?[a,b]* (obviously two c in the string is invalid, yeah?) and assume that the current user input is aabcbb but there is a typo because what the user actually wanted is aacbbb. There are many possible ways to fix this typo:
remove c and add it before first b - will work OK
remove first b and add after c - will work OK
add c before first b and then remove the old one - Oops, we prohibit this input as invalid and the user will go crazy because no normal human can understand such a logic.
Note also that your hitEnd will have the same problem here unless you prohibit user to enter characters in the middle of the input box that will be another way to make a horrible UI.
In the real life there would be many much more complicated examples that any of your smart heuristics will not be able to account for properly and thus will upset users.
So what to do? I think the only thing you can do and still get reasonable UX is the simplest thing you can do i.e. just analyze your "target RegEx" for set of allowed characters and make your "test RegEx" [set of allowed chars]*. And yes, if the "target RegEx" contains . wildcart, you will not be able to do any reasonable filtering at all.

How to filter emojis from string jquery/javascript?

I'm using the following to exclude emojis/emoticons from a string in php. How do I do the same with javascript or jQuery?
preg_replace('/([0-9|#][\x{20E3}])|[\x{00ae}|\x{00a9}|\x{203C}|\x{2047}|\x{2048}|\x{2049}|\x{3030}|\x{303D}|\x{2139}|\x{2122}|\x{3297}|\x{3299}][\x{FE00}-\x{FEFF}]?|[\x{2190}-\x{21FF}][\x{FE00}-\x{FEFF}]?|[\x{2300}-\x{23FF}][\x{FE00}-\x{FEFF}]?|[\x{2460}-\x{24FF}][\x{FE00}-\x{FEFF}]?|[\x{25A0}-\x{25FF}][\x{FE00}-\x{FEFF}]?|[\x{2600}-\x{27BF}][\x{FE00}-\x{FEFF}]?|[\x{2900}-\x{297F}][\x{FE00}-\x{FEFF}]?|[\x{2B00}-\x{2BF0}][\x{FE00}-\x{FEFF}]?|[\x{1F000}-\x{1F6FF}][\x{FE00}-\x{FEFF}]?/u', '', $text);
This is what I try to do
$('#edit.popup .btn.save').live('click',function(e) {
var item_id = $(this).attr('id');
var edited_text = $('#edit.popup textarea').val().replace(/([0-9|#][\x{20E3}])|[\x{00ae}|\x{00a9}|\x{203C}|\x{2047}|\x{2048}|\x{2049}|\x{3030}|\x{303D}|\x{2139}|\x{2122}|\x{3297}|\x{3299}][\x{FE00}-\x{FEFF}]?|[\x{2190}-\x{21FF}][\x{FE00}-\x{FEFF}]?|[\x{2300}-\x{23FF}][\x{FE00}-\x{FEFF}]?|[\x{2460}-\x{24FF}][\x{FE00}-\x{FEFF}]?|[\x{25A0}-\x{25FF}][\x{FE00}-\x{FEFF}]?|[\x{2600}-\x{27BF}][\x{FE00}-\x{FEFF}]?|[\x{2900}-\x{297F}][\x{FE00}-\x{FEFF}]?|[\x{2B00}-\x{2BF0}][\x{FE00}-\x{FEFF}]?|[\x{1F000}-\x{1F6FF}][\x{FE00}-\x{FEFF}]?/u, '');
$('#grid li.image#' + item_id + ' img').attr('data-text', edited_text);
});
I found this suggestion in another post on Stack Overflow, but it's not working. It's still allowing emojis from ex ios.
.replace(/([\uE000-\uF8FF]|\uD83C[\uDF00-\uDFFF]|\uD83D[\uDC00-\uDDFF])/g, '')
What I try to achieve is to not allow emojis in textfield, and if an emoji is inserted (from ex ios keyboard) it will be replaced by nothing. It works with php. Someone here who can help me out with this?
Based on the answer from mb21, this regex did the job. No loop required!
/[\uD800-\uDBFF][\uDC00-\uDFFF]/g
As pointed out in this answer, JavaScript doesn't support Unicode code points outside the Basic Multilingual Plane (where iOS emojis lie).
I highly recommend reading The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!). Then you'll understand what was meant with:
So some indirect approach is needed. Cf. to JavaScript strings outside of the BMP.
For example, you could look for code points in the range [\uD800-\uDBFF] (high surrogates), and when you find one, check that the next code point in the string is in the range [\uDC00-\uDFFF] (if not, there is a serious data error), interpret the two as a Unicode character, and replace them by whatever you wish to put there. This looks like a job for a simple loop through the string, rather than a regular expression.

Condition Javascript Regex Validation in ASP.NET

Currently I am adding Javascript validation to a ASP.NET textbox. The requirement is the first two characters should take alphabetic (a-z) and last characters should be numeric (0-9). Maxlength is 4. This should in done in keypress event.
As I am newbie to JS, don't have much idea on how to do this.
Here is a quick way of adding a client side JavaScript validator to a textbox.
Please note that this works on LostFocus, instead of the Keydown, but you can change it to keydown if you really think thats the way to go.
Check the Fiddle: http://jsfiddle.net/B4xwK/
Also, this requires jQuery to be loaded on the client side.
$('#myInput').blur(function(e) {
var r = new RegExp("[A-Za-z]{2}[0-9]{2}");
var valid = r.test(e.target.value);
});​

validation on input box

I want to create a Input Box for entering the private entering details of a person, On which first character has to be A or E and rest can be alphanumeric and no special character are allowed. I need to do validation for the same that no one enter any special character and First character has to be A or E (all has to be check on the client side)
Can any one guide me how to proceed
Look in to regex with JavaScript, along with the keydown event. You can attach a function to the keydown event, and inside this function check the input box(es) match and then proceed as you wish.
Something like this: (not tested)
<script>
function checkInput() {
var inputToCheck = document.getElementById('my_input');
if (!inputToCheck.value.match(/[AE]\w+/)) {
// do something here, like alert them or remove special characters with .replace
}
}
</script>
<input id="my_input" onkeydown="checkInput();" />
If this is the only field to validate I would write my own with js & regexp as Leonard Challis wrote (but on the keyup event).
If there will be a lot of fields and perhaps multiple forms on the site, I would consider a framework. This is pretty good: http://bassistance.de/jquery-plugins/jquery-plugin-validation/
If you would be using that one you could write a custom function for your special needs. http://docs.jquery.com/Plugins/Validation/Validator/addMethod#namemethodmessage
This sounds like a homework assignment (since starting with specifically “E” or “A” sounds very artificial), so I’d suggest first deciding on the interpretation of the task. Should “E” and “A” be interpreted case-insensitively? What exactly does “alphanumeric” mean? For example, is “Σ” or “Я” or “١” alphanumeric? If the purpose is to do the checks client-side, should you try to make the page completely non-functional when JavaScript is disabled, or should you just do the checks client-side as far as possible? (In the latter case, consider using the pattern attribute in HTML. On some modern browsers, it causes the check to be performed even when JavaScript is disabled.)

How to determine if a keydown event occurs on a printable character?

We are trying to prevent users from typing beyond the maximum characters our DB allows for text area fields in our web app. Once they have reached the max length allowed in the text area we would still like to allow them to hit keys that are non-printing for example: Tab, backspace, ctrl+s, etc.
I'm wondering if there is a simple way to detect if a keycode is a printable character. I thought something like String.fromCharCode might do the trick and return false if it couldn't do the conversion, but doesn't seem to behave that way.
You could just set length of the textbox to the max number of characters allowed by the database
W3Schools
Try this: http://www.quirksmode.org/dom/maxlength.html
Quirksmode goes through an easy way to implement the maxlength attribute on textareas, which isn't natively supported.
And to directly answer your question:
var character = String.fromCharCode(e.charCode);
Where e is the event object of the keypress event.

Categories

Resources