Related
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
Alright, so I'm making a Facebook-style chat. But that doesn't really matter.
See here:
http://jsfiddle.net/SkHme/7/
Nice and pretty, right? Well, there's a problem. Notice this line:
<div class="conversation EmperorCuzco" onclick="setActive('EmperorCuzco')">
See the onclick attribute? Well, it's not working. However, I have confirmed that the function itself DOES work. (if you run it just like that in the JavaScript, it runs like a dream) I have further confirmed that the function is not the problem by attempting to replace the onclick value with a simple alert('blah'), but that doesn't work either.
So, what's up? I'm guessing that something in my JavaScript is somehow disabling something, but I have absolutely no idea what it could be, nor how I could go about fixing it. I did some web searching, but couldn't find anything that helps.
What's going on?
Your setActive function is defined inside the scope of the $(document).ready handler. Move the function outside that function so that it is in the global scope.
Right now it looks like this:
$(document).ready(function()
{
// ...
function setActive(new_conversation)
{
// ...
}
});
Now change that to:
$(document).ready(function()
{
// ...
});
function setActive(new_conversation)
{
// ...
}
Really though, you should separate your content from your interactions and bind those event handlers in your script itself. Something like:
// Refers to the last clicked conversation *button*
// Initialize to empty jQuery object
var $active_conversation = $([]);
// Binding on #chat, targeting click events on .conversation_button children
$("#chat").on("click", ".conversation_button", function() {
// Hide currently active conversation
$active_conversation.hide();
$active_conversation.siblings('.conversation_button').removeClass("selected");
// Set as currently active conversation button
// Note: this refers to the clicked <div class="conversation_button">
var $this = $(this);
$active_conversation = $this.siblings('.conversation');
// Show this conversation
$active_conversation.show();
$this.removeClass("alert").addClass("selected");
});
Some advantages of this approach:
You don't need different classes for different conversations. By storing the actual conversation DOM element (as a jQuery object) in $active_conversation, the conversation can be identified without any extra processing.
You can add and remove whole list items with a conversation without assigning new event handlers. In the sample above, the event handler for all .conversation_button elements is defined at the level of #chat. For more about this binding mechanism, read up on .on (or .delegate for pre-1.7).
Here, have an updated fiddle! :-)
If all you say is really true (bad mistakes happen), the only thing that can make this is that an other event handler which takes your event before uses stopPropagation() or return false;
A quick check that can do is replace onclick with onmousedown or onmouseup, and see if you alert become visible.
I want to make 'select' element to behave as if it was clicked while i click on a completely different divider. Is it possible to make it act as if it was clicked on when its not??
here is my code
http://jsfiddle.net/fiddlerOnDaRoof/B4JUK/
$(document).ready(function () {
$("#arrow").click(function () {
$("#selectCar").click() // I also tried trigger("click");
});
});
So far it didnt work with either .click();
nor with the .trigger("click");
Update:
From what i currently understand the answer is no, you cannot. Although click duplicates the functionality it will not work for certain examples like this one. If anybody knows why this is please post the answer below and i will accept it as best answer. Preferably please include examples for which it will not work correctly.
You can use the trigger(event) function like ("selector").trigger("click")
You can call the click function without arguments, which triggers an artificial click. E.g.:
$("selector for the element").click();
That will fire jQuery handlers and (I believe) DOM0 handlers as well. I don't think it fires It doesn't fire handlers added via DOM2-style addEventListener/attachEvent calls, as you can see here: Live example | source
jQuery(function($) {
$("#target").click(function() {
display("<code>click</code> received by jQuery handler");
});
document.getElementById("target").onclick = function() {
display("<code>click</code> received by DOM0 handler");
};
document.getElementById("target").addEventListener(
'click',
function() {
display("<code>click</code> received by DOM2 handler");
},
false
);
display("Triggering click");
$("#target").click();
function display(msg) {
$("<p>").html(msg).appendTo(document.body);
}
});
And here's a version (source) using the onclick="..." attribute mechanism for the DOM0 handler; it gets triggered that way too.
Also note that it probably won't perform the default action; for instance this example (source) using a link, the link doesn't get followed.
If you're in control of the handlers attached to the element, this is usually not a great design choice; instead, you'd ideally make the action you want to take a function, and then call that function both when the element is clicked and at any other time you want to take that action. But if you're trying to trigger handlers attached by other code, you can try the simulated click.
Yes.
$('#yourElementID').click();
If you added the event listener with jquery you can use .trigger();
$('#my_element').trigger('click');
Sure, you can trigger a click on something using:
$('#elementID').trigger('click');
Have a look at the documentation here: http://api.jquery.com/trigger/
Seeing you jsfiddle, first learn to use this tool.
You selected MooTools and not jQuery. (updated here)
Now, triggering a "click" event on a select won't do much.
I guess you want the 2nd select to unroll at the same time as the 1st one.
As far as I know, it's not possible.
If not, try the "change" event on select.
We are working on a JavaScript tool that has older code in it,
so we cannot re-write the whole tool.
Now, a menu was added position fixed to the bottom and the client would very much like it to have a toggle button to open and close the menu,
except closing needs to happen automatically when a user starts doing things out side of the menu, for example, when a user goes back into the page, and selects something or clicks on a form field.
This could technically work with a click event on the body, triggering on any click,
however there are numerous items in the older code, where a click event was handled on an internal link, and return false was added to the click function, in order for the site not to continue to the link's href tag.
So clearly, a general function like this does work, but not when clicked on an internal link where the return false stops the propagation.
$('body').click(function(){
console.log('clicked');
});
Is there a way I can force the body click event anyway,
or is there another way I can let the menu dissappear, using some global click event or anything similar?
Without having to rewrite all other clicks in the application that were created years ago.
That would be a monster task, especially since I have no clue how I would rewrite them, without the return false, but still don't let them go to their href.
Events in modern DOM implementations have two phases, capturing and bubbling. The capturing phase is the first phase, flowing from the defaultView of the document to the event target, followed by the bubbling phase, flowing from the event target back to the defaultView. For more information, see http://www.w3.org/TR/DOM-Level-3-Events/#event-flow.
To handle the capturing phase of an event, you need to set the third argument for addEventListener to true:
document.body.addEventListener('click', fn, true);
Sadly, as Wesley mentioned, the capturing phase of an event cannot be handled reliably, or at all, in older browsers.
One possible solution is to handle the mouseup event instead, since event order for clicks is:
mousedown
mouseup
click
If you can be sure you have no handlers cancelling the mouseup event, then this is one way (and, arguably, a better way) to go. Another thing to note is that many, if not most (if not all), UI menus disappear on mouse down.
In cooperation with Andy E, this is the dark side of the force:
var _old = jQuery.Event.prototype.stopPropagation;
jQuery.Event.prototype.stopPropagation = function() {
this.target.nodeName !== 'SPAN' && _old.apply( this, arguments );
};
Example: http://jsfiddle.net/M4teA/2/
Remember, if all the events were bound via jQuery, you can handle those cases just here. In this example, we just call the original .stopPropagation() if we are not dealing with a <span>.
You cannot prevent the prevent, no.
What you could do is, to rewrite those event handlers manually in-code. This is tricky business, but if you know how to access the stored handler methods, you could work around it. I played around with it a little, and this is my result:
$( document.body ).click(function() {
alert('Hi I am bound to the body!');
});
$( '#bar' ).click(function(e) {
alert('I am the span and I do prevent propagation');
e.stopPropagation();
});
$( '#yay' ).click(function() {
$('span').each(function(i, elem) {
var events = jQuery._data(elem).events,
oldHandler = [ ],
$elem = $( elem );
if( 'click' in events ) {
[].forEach.call( events.click, function( click ) {
oldHandler.push( click.handler );
});
$elem.off( 'click' );
}
if( oldHandler.length ) {
oldHandler.forEach(function( handler ) {
$elem.bind( 'click', (function( h ) {
return function() {
h.apply( this, [{stopPropagation: $.noop}] );
};
}( handler )));
});
}
});
this.disabled = 1;
return false;
});
Example: http://jsfiddle.net/M4teA/
Notice, the above code will only work with jQuery 1.7. If those click events were bound with an earlier jQuery version or "inline", you still can use the code but you would need to access the "old handler" differently.
I know I'm assuming a lot of "perfect world" scenario things here, for instance, that those handles explicitly call .stopPropagation() instead of returning false. So it still might be a useless academic example, but I felt to come out with it :-)
edit: hey, return false; will work just fine, the event objects is accessed in the same way.
this is the key (vs evt.target). See example.
document.body.addEventListener("click", function (evt) {
console.dir(this);
//note evt.target can be a nested element, not the body element, resulting in misfires
console.log(evt.target);
alert("body clicked");
});
<h4>This is a heading.</h4>
<p>this is a paragraph.</p>
If you make sure that this is the first event handler work, something like this might do the trick:
$('*').click(function(event) {
if (this === event.target) { // only fire this handler on the original element
alert('clicked');
}
});
Note that, if you have lots of elements in your page, this will be Really Very Slow, and it won't work for anything added dynamically.
What you really want to do is bind the event handler for the capture phase of the event. However, that isn't supported in IE as far as I know, so that might not be all that useful.
http://www.quirksmode.org/js/events_order.html
Related questions:
jQuery equivalent of JavaScript's addEventListener method
Emulate W3C event capturing model in IE
I know this is an old question, but to add to #lonesomeday's answer, you can do the same in vanilla JavaScript with:
document.querySelectorAll('*')
.forEach(element => element.addEventListener('click', e => {
console.log('clicked: ', e.target)
}))
This will add the listener to each element instead of to the body, and from experience this will let you execute the click event even if the page is navigating away or if there's already an onclick with stopPropagation in it.
I think this is what you need:
$("body").trigger("click");
This will allow you to trigger the body click event from anywhere.
You could use jQuery to add an event listener on the document DOM.
$(document).on("click", function () {
console.log('clicked');
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
document.body.addEventListener("keyup", function(event) {
if (event.keyCode === 13) {
event.preventDefault();
console.log('clicked ;)');
}
});
DEMO
https://jsfiddle.net/muratkezli/51rnc9ug/6/
My fix in Feb 2023:
To trigger a function anywhere on the page/document:
JS code:
document.onmouseup = closeMenus
'closeMenus' would be a function that turns each menu's display value to none.
Any 'mouseup' event anywhere on the document, calls the function.