If (acctRB.Checked == true)
{
Execute Business Code
}
Well, you don't need the == true:
if (acctRB.checked)
{
// It's checked
}
else
{
// It's not checked
}
So what you have is pretty much correct. Just remove the == true as it's not required.
Bear in mind that IE is case insensitive while other browsers aren't. Your sample code will work for IE....
Rather do
if (acctRB.checked) {
//Checked
} else {
//Unchecked
}
It works for both IE and other major browsers....Or, if if checkbox id is "acctRB" do,
if (document.getElementById("acctRB").checked) {
//Checked
} else {
//Unchecked
}
Related
I have a form which consists of some elements such as a select-input and a checkbox.
The submit-button is disabled and I want to enable the button only if two conditions are fulfilled. An initial version works well, but only if clicking on the checkbox is the last step. But it should be a function that reacts on both, clicks/changes in the select and the checkbox.
The following code is working but with the problem explained above.
$('#toscheck').click(function() {
if ($(this).is(':checked') && $("#ctry").val().length > 0) {
$('#pjo').removeAttr('disabled');
$('#sjo').removeAttr('disabled');
} else {
$('#pjo').attr('disabled', 'disabled');
$('#sjo').attr('disabled', 'disabled');
}
});
The following solution doesn't work:
$('document').ready(function() {
if ($('#toscheck').is(':checked') && $("#ctry").val().length > 0) {
$('#pjo').removeAttr('disabled');
$('#sjo').removeAttr('disabled');
} else {
$('#pjo').attr('disabled', 'disabled');
$('#sjo').attr('disabled', 'disabled');
}
});
But how can I solve this? What I have found on SO wasn't really helpful.
Again: it should work as following; if the checkbox is selected AND the selected option has a value, the button would be enabled.
Thanks in advance.
First, store you element in variables:
let $toscheck = $('#toscheck'),
$ctry = $("#ctry"),
$pjo = $('#pjo'),
$sjo = $('#sjo');
Then, create your validation function with the stored variables. Note that I replace attr and removeAttr with .prop, it is better:
function checkThings(){
if ($toscheck.is(':checked') && $ctry.val().length > 0) {
$pjo.prop('disabled', false);
$sjo.prop('disabled', false);
} else {
$pjo.prop('disabled', true);
$sjo.prop('disabled', true);
}
}
Then, bind the events:
$toscheck.add($ctry).on( 'change', checkThings );
Note that I used change on both elements since it does work with inputs and checkboxes.
Final code :
let $toscheck = $('#toscheck'),
$ctry = $("#ctry"),
$pjo = $('#pjo'),
$sjo = $('#sjo');
function checkThings(){
if ($toscheck.is(':checked') && $ctry.val().length > 0) {
$pjo.prop('disabled', false);
$sjo.prop('disabled', false);
} else {
$pjo.prop('disabled', true);
$sjo.prop('disabled', true);
}
}
$toscheck.add($ctry).on( 'change', checkThings );
$(document).ready(function() {
$('#toscheck,#ctry').change(function() {
if ($('#toscheck').is(':checked') && $("#ctry").val().length > 0) {
$('#pjo').removeAttr('disabled');
$('#sjo').removeAttr('disabled');
} else {
$('#pjo').attr('disabled', 'disabled');
$('#sjo').attr('disabled', 'disabled');
}
});
});
use this code
.change function detects change and then on call check whether your AND condition is met or not
and add #toscheck in quotes i.e. '#toscheck'
$('#toscheck,#xyz,#abc').change()
for detecting change for multiple elements
This function executes when a button is tapped. All the code works except for the first 'if' statement when I am trying to check if both 'dland' and 'advent' are checked off. See the bold code below. That if statement should execute function 'randomItinerary1' if both the 'dland' and 'advent' checkboxes are marked. The problem must lie with checking the booleans of two checkboxes in one if statement and I need a workaround. Thank you all in advance for your time and consideration.
$("#q1").on("tap", function(){
//var cv2 = $('#advent:checked').val();
navigation(page2, page4);
**if ((document.getElementById('dland').checked) && (document.getElementById('advent').checked))** {
randomItinerary1();
}
else if (document.getElementById('dland').checked) {
randomItinerary2();
}
else if (document.getElementById('advent').checked) {
randomItinerary3();
}
else {
alert("You didn't select and parks");
}
});
});
Check below code, it works for all condition
https://jsfiddle.net/nvdhuLum/
$("#q1").on("click", function(){
if ((document.getElementById('dland').checked) && (document.getElementById('advent').checked)) {
alert("both checked")
}
if (document.getElementById('dland').checked) {
alert("dland checked")
}
if (document.getElementById('advent').checked) {
alert("advent checked")
}
else {
alert("You didn't select and parks");
}
});
I am using if else condition in jQuery to handle check boxes.
My condition is that at least one check box is selected and after that alert if condition is running and not the other one. Here is my code
$(document).ready(function() {
$('#outer_menu').click(function() {
var $fields = $(this).find('input[name="mychoice"]:checked');
if (!$fields.length) {
alert('You must check at least one box!');
if(".a:checked "){
$(".language").find(".translate-language").toggleClass("translate-language translate-language_show");
} else if (".a_orignal:checked") {
$(".language").find(".orignal-language_hide").toggleClass("orignal-language_hide orignal-language");
} else {
alert('chose one');
}
return false;
}
});
});
our else if condition is not working when if condition false
I think what you are trying to do is to check whether the element with class a or a_original is checked, for that you need
if ($(".a").is(":checked ") {
$(".language").find(".translate-language").toggleClass("translate-language translate-language_show");
} else if (".a_orignal").is(":checked") {
$(".language").find(".orignal-language_hide").toggleClass("orignal-language_hide orignal-language");
} else {
alert('chose one');
}
use .is() to check whether the element satisfies the given selector
you need to fetch the jQuery object for the target element
Look at this line of code:
if(".a:checked ")
I believe it should be:
if ($(".a:checked "))
That might not be the end of your issues though, unless a is a class rather than you intending to select links.
Same problem here:
else if (".a_orignal:checked")
Change to:
if($(".a").is(":checked")){
and:
else if ($(".a_orignal").is(":checked")){
The .prop() method gets the property value for the first element in the matched set.
Write:
if(".a").prop("checked"){
$(".language").find(".translate-language").toggleClass("translate-language translate-language_show");
}
else if (".a_orignal").prop("checked"){
$(".language").find(".orignal-language_hide").toggleClass("orignal-language_hide orignal-language");
}
I have this
$("#formNewsletter").submit(function(){
return false;
})
It works as expected - the form is not submited.
When i write this, it seems like it is returning true (the form is being send)
$("#formNewsletter").submit(function(){
if($("#newsletterSelSpec div").length() > 0)
{
alert("Good");
}
else
{
alert("Please add at least one speciality!");
}
return false;
})
I would like to understand why is this happening and how can I make it work.
Thank you!
the property length isn't a method.
Use $("#newsletterSelSpec div").length > 0.
You can prevent the default behavior of an event using preventDefault() witch is a method in the first argument. (event).
$("#formNewsletter").submit(function(event) {
event.preventDefault();
if($("#newsletterSelSpec div").length() > 0)
{
alert("Good");
}
else
{
alert("Please add at least one speciality!");
}
});
Not sure, but the problem can be that the alert stops the process of the script and not the submit event.
$("#formNewsletter").submit(function(e) {
if ($("#newsletterSelSpec div").length > 0) {
alert("Good");
} else {
e.preventDefault(); // prevent the form submission
alert("Please add at least one speciality!");
}
});
NOTE
you're using .length(), but it should be .length only, that means
$("#newsletterSelSpec div").length
So, I have some faux checkboxes (so I could style them) that work with jQuery to act as checked or not checked. There are a number of faux checkboxes in my document, and for each one I have a click function:
var productInterest = [];
productInterest[0] = false;
productInterest[1] = false;
productInterest[2] = false;
// here is one function of the three:
$('#productOne').click(function() {
if (productInterest[0] == false) {
$(this).addClass("checkboxChecked");
productInterest[0] = true;
} else {
$(this).removeClass("checkboxChecked");
productInterest[0] = false;
}
});
The problem seems to be that there is an error in the if statement, because it will check, but not uncheck. In other words it will add the class, but the variable won't change so it still thinks its checked. Anybody have any ideas? Thanks for your help.
UPDATE: So, I need to show you all my code because it works in the way I supplied it (thanks commenters for helping me realize that)... just not in the way its actually being used on my site. so below please find the code in its entirety.
Everything needs to happen in one function, because the UI and data for each checkbox need to be updated at once. So here is the complete function:
$('input[name=silkInterest]').click(function() { // they all have the same name
var silkInterest = [];
silkInterest[0] = false;
silkInterest[1] = false;
silkInterest[2] = false;
if ($(this).is('#silkSilk')) { // function stops working because the .is()
if (silkInterest[0] == false) {
$(this).addClass("checkboxChecked");
silkInterest[0] = true;
} else {
$(this).removeClass("checkboxChecked");
silkInterest[0] = false;
}
alert(silkInterest[0]);
}
if ($(this).is('#silkAlmond')) {
if (silkInterest[1] == false) {
$(this).addClass("checkboxChecked");
silkInterest[1] = true;
} else {
$(this).removeClass("checkboxChecked");
silkInterest[1] = false;
}
}
if ($(this).is('#silkCoconut')) {
if (silkInterest[2] == false) {
$(this).addClass("checkboxChecked");
silkInterest[2] = true;
} else {
$(this).removeClass("checkboxChecked");
silkInterest[2] = false;
}
}
var silkInterestString = silkInterest.toString();
$('input[name=silkInterestAnswer]').val(silkInterestString);
// This last bit puts the code into a hidden field so I can capture it with php.
});
I can't spot the problem in your code, but you can simply use the class you're adding in place of the productInterest array. This lets you condense the code down to a single:
// Condense productOne, productTwo, etc...
$('[id^="product"]').click(function() {
// Condense addClass, removeClass
$(this).toggleClass('checkboxChecked');
});
And to check if one of them is checked:
if ($('#productOne').hasClass('checkboxChecked')) {...}
This'll make sure the UI is always synced to the "data", so if there's other code that's interfering you'll be able to spot it.
Okay, just had a palm to forehead moment. In regards to my revised code- the variables get reset everytime I click. That was the problem. Duh.