Related
Consider the following two alternatives:
console.log("double");
console.log('single');
The former uses double quotes around the string, whereas the latter uses single quotes around the string.
I see more and more JavaScript libraries out there using single quotes when handling strings.
Are these two usages interchangeable? If not, is there an advantage in using one over the other?
The most likely reason for use of single vs. double in different libraries is programmer preference and/or API consistency. Other than being consistent, use whichever best suits the string.
Using the other type of quote as a literal:
alert('Say "Hello"');
alert("Say 'Hello'");
This can get complicated:
alert("It's \"game\" time.");
alert('It\'s "game" time.');
Another option, new in ECMAScript 6, is template literals which use the backtick character:
alert(`Use "double" and 'single' quotes in the same string`);
alert(`Escape the \` back-tick character and the \${ dollar-brace sequence in a string`);
Template literals offer a clean syntax for: variable interpolation, multi-line strings, and more.
Note that JSON is formally specified to use double quotes, which may be worth considering depending on system requirements.
If you're dealing with JSON, it should be noted that strictly speaking, JSON strings must be double quoted. Sure, many libraries support single quotes as well, but I had great problems in one of my projects before realizing that single quoting a string is in fact not according to JSON standards.
There is no one better solution; however, I would like to argue that double quotes may be more desirable at times:
Newcomers will already be familiar with double quotes from their language. In English, we must use double quotes " to identify a passage of quoted text. If we were to use a single quote ', the reader may misinterpret it as a contraction. The other meaning of a passage of text surrounded by the ' indicates the 'colloquial' meaning. It makes sense to stay consistent with pre-existing languages, and this may likely ease the learning and interpretation of code.
Double quotes eliminate the need to escape apostrophes (as in contractions). Consider the string: "I'm going to the mall", vs. the otherwise escaped version: 'I\'m going to the mall'.
Double quotes mean a string in many other languages. When you learn a new language like Java or C, double quotes are always used. In Ruby, PHP and Perl, single-quoted strings imply no backslash escapes while double quotes support them.
JSON notation is written with double quotes.
Nonetheless, as others have stated, it is most important to remain consistent.
Section 7.8.4 of the specification describes literal string notation. The only difference is that DoubleStringCharacter is "SourceCharacter but not double-quote" and SingleStringCharacter is "SourceCharacter but not single-quote". So the only difference can be demonstrated thusly:
'A string that\'s single quoted'
"A string that's double quoted"
So it depends on how much quote escaping you want to do. Obviously the same applies to double quotes in double quoted strings.
I'd like to say the difference is purely stylistic, but I'm really having my doubts. Consider the following example:
/*
Add trim() functionality to JavaScript...
1. By extending the String prototype
2. By creating a 'stand-alone' function
This is just to demonstrate results are the same in both cases.
*/
// Extend the String prototype with a trim() method
String.prototype.trim = function() {
return this.replace(/^\s+|\s+$/g, '');
};
// 'Stand-alone' trim() function
function trim(str) {
return str.replace(/^\s+|\s+$/g, '');
};
document.writeln(String.prototype.trim);
document.writeln(trim);
In Safari, Chrome, Opera, and Internet Explorer (tested in Internet Explorer 7 and Internet Explorer 8), this will return the following:
function () {
return this.replace(/^\s+|\s+$/g, '');
}
function trim(str) {
return str.replace(/^\s+|\s+$/g, '');
}
However, Firefox will yield a slightly different result:
function () {
return this.replace(/^\s+|\s+$/g, "");
}
function trim(str) {
return str.replace(/^\s+|\s+$/g, "");
}
The single quotes have been replaced by double quotes. (Also note how the indenting space was replaced by four spaces.) This gives the impression that at least one browser parses JavaScript internally as if everything was written using double quotes. One might think, it takes Firefox less time to parse JavaScript if everything is already written according to this 'standard'.
Which, by the way, makes me a very sad panda, since I think single quotes look much nicer in code. Plus, in other programming languages, they're usually faster to use than double quotes, so it would only make sense if the same applied to JavaScript.
Conclusion: I think we need to do more research on this.
This might explain Peter-Paul Koch's test results from back in 2003.
It seems that single quotes are sometimes faster in Explorer Windows (roughly 1/3 of my tests did show a faster response time), but if Mozilla shows a difference at all, it handles double quotes slightly faster. I found no difference at all in Opera.
2014: Modern versions of Firefox/Spidermonkey don’t do this anymore.
If you're doing inline JavaScript (arguably a "bad" thing, but avoiding that discussion) single quotes are your only option for string literals, I believe.
E.g., this works fine:
<a onclick="alert('hi');">hi</a>
But you can't wrap the "hi" in double quotes, via any escaping method I'm aware of. Even " which would have been my best guess (since you're escaping quotes in an attribute value of HTML) doesn't work for me in Firefox. " won't work either because at this point you're escaping for HTML, not JavaScript.
So, if the name of the game is consistency, and you're going to do some inline JavaScript in parts of your application, I think single quotes are the winner. Someone please correct me if I'm wrong though.
Technically there's no difference. It's only matter of style and convention.
Douglas Crockford1 recommends using double quotes.
I personally follow that.
Strictly speaking, there is no difference in meaning; so the choice comes down to convenience.
Here are several factors that could influence your choice:
House style: Some groups of developers already use one convention or the other.
Client-side requirements: Will you be using quotes within the strings? (See Ady's answer.)
Server-side language: VB.NET people might choose to use single quotes for JavaScript so that the scripts can be built server-side (VB.NET uses double-quotes for strings, so the JavaScript strings are easy to distinguished if they use single quotes).
Library code: If you're using a library that uses a particular style, you might consider using the same style yourself.
Personal preference: You might think one or other style looks better.
Just keep consistency in what you use. But don't let down your comfort level.
"This is my string."; // :-|
"I'm invincible."; // Comfortable :)
'You can\'t beat me.'; // Uncomfortable :(
'Oh! Yes. I can "beat" you.'; // Comfortable :)
"Do you really think, you can \"beat\" me?"; // Uncomfortable :(
"You're my guest. I can \"beat\" you."; // Sometimes, you've to :P
'You\'re my guest too. I can "beat" you too.'; // Sometimes, you've to :P
ECMAScript 6 update
Using template literal syntax.
`Be "my" guest. You're in complete freedom.`; // Most comfort :D
I hope I am not adding something obvious, but I have been struggling with Django, Ajax, and JSON on this.
Assuming that in your HTML code you do use double quotes, as normally should be, I highly suggest to use single quotes for the rest in JavaScript.
So I agree with ady, but with some care.
My bottom line is:
In JavaScript it probably doesn't matter, but as soon as you embed it inside HTML or the like you start to get troubles. You should know what is actually escaping, reading, passing your string.
My simple case was:
tbox.innerHTML = tbox.innerHTML + '<div class="thisbox_des" style="width:210px;" onmouseout="clear()"><a href="/this/thislist/'
+ myThis[i].pk +'"><img src="/site_media/'
+ myThis[i].fields.thumbnail +'" height="80" width="80" style="float:left;" onmouseover="showThis('
+ myThis[i].fields.left +','
+ myThis[i].fields.right +',\''
+ myThis[i].fields.title +'\')"></a><p style="float:left;width:130px;height:80px;"><b>'
+ myThis[i].fields.title +'</b> '
+ myThis[i].fields.description +'</p></div>'
You can spot the ' in the third field of showThis.
The double quote didn't work!
It is clear why, but it is also clear why we should stick to single quotes... I guess...
This case is a very simple HTML embedding, and the error was generated by a simple copy/paste from a 'double quoted' JavaScript code.
So to answer the question:
Try to use single quotes while within HTML. It might save a couple of debug issues...
It's mostly a matter of style and preference. There are some rather interesting and useful technical explorations in the other answers, so perhaps the only thing I might add is to offer a little worldly advice.
If you're coding in a company or team, then it's probably a good idea to follow the "house style".
If you're alone hacking a few side projects, then look at a few prominent leaders in the community. For example, let's say you getting into Node.js. Take a look at core modules, for example, Underscore.js or express and see what convention they use, and consider following that.
If both conventions are equally used, then defer to your personal preference.
If you don't have any personal preference, then flip a coin.
If you don't have a coin, then beer is on me ;)
I am not sure if this is relevant in today's world, but double quotes used to be used for content that needed to have control characters processed and single quotes for strings that didn't.
The compiler will run string manipulation on a double quoted string while leaving a single quoted string literally untouched. This used to lead to 'good' developers choosing to use single quotes for strings that didn't contain control characters like \n or \0 (not processed within single quotes) and double quotes when they needed the string parsed (at a slight cost in CPU cycles for processing the string).
If you are using JSHint, it will raise an error if you use a double quoted string.
I used it through the Yeoman scafflholding of AngularJS, but maybe there is somehow a manner to configure this.
By the way, when you handle HTML into JavaScript, it's easier to use single quote:
var foo = '<div class="cool-stuff">Cool content</div>';
And at least JSON is using double quotes to represent strings.
There isn't any trivial way to answer to your question.
There isn't any difference between single and double quotes in JavaScript.
The specification is important:
Maybe there are performance differences, but they are absolutely minimum and can change any day according to browsers' implementation. Further discussion is futile unless your JavaScript application is hundreds of thousands lines long.
It's like a benchmark if
a=b;
is faster than
a = b;
(extra spaces)
today, in a particular browser and platform, etc.
Examining the pros and cons
In favor of single quotes
Less visual clutter.
Generating HTML: HTML attributes are usually delimited by double quotes.
elem.innerHTML = 'Hello';
However, single quotes are just as legal in HTML.
elem.innerHTML = "<a href='" + url + "'>Hello</a>";
Furthermore, inline HTML is normally an anti-pattern. Prefer templates.
Generating JSON: Only double quotes are allowed in JSON.
myJson = '{ "hello world": true }';
Again, you shouldn’t have to construct JSON this way. JSON.stringify() is often enough. If not, use templates.
In favor of double quotes
Doubles are easier to spot if you don't have color coding. Like in a console log or some kind of view-source setup.
Similarity to other languages: In shell programming (Bash etc.), single-quoted string literals exist, but escapes are not interpreted inside them. C and Java use double quotes for strings and single quotes for characters.
If you want code to be valid JSON, you need to use double quotes.
In favor of both
There is no difference between the two in JavaScript. Therefore, you can use whatever is convenient at the moment. For example, the following string literals all produce the same string:
"He said: \"Let's go!\""
'He said: "Let\'s go!"'
"He said: \"Let\'s go!\""
'He said: \"Let\'s go!\"'
Single quotes for internal strings and double for external. That allows you to distinguish internal constants from strings that are to be displayed to the user (or written to disk etc.). Obviously, you should avoid putting the latter in your code, but that can’t always be done.
Talking about performance, quotes will never be your bottleneck. However, the performance is the same in both cases.
Talking about coding speed, if you use ' for delimiting a string, you will need to escape " quotes. You are more likely to need to use " inside the string. Example:
// JSON Objects:
var jsonObject = '{"foo":"bar"}';
// HTML attributes:
document.getElementById("foobar").innerHTML = '<input type="text">';
Then, I prefer to use ' for delimiting the string, so I have to escape fewer characters.
There are people that claim to see performance differences: old mailing list thread. But I couldn't find any of them to be confirmed.
The main thing is to look at what kind of quotes (double or single) you are using inside your string. It helps to keep the number of escapes low. For instance, when you are working with HTML content inside your strings, it is easier to use single quotes so that you don't have to escape all double quotes around the attributes.
When using CoffeeScript I use double quotes. I agree that you should pick either one and stick to it. CoffeeScript gives you interpolation when using the double quotes.
"This is my #{name}"
ECMAScript 6 is using back ticks (`) for template strings. Which probably has a good reason, but when coding, it can be cumbersome to change the string literals character from quotes or double quotes to backticks in order to get the interpolation feature. CoffeeScript might not be perfect, but using the same string literals character everywhere (double quotes) and always be able to interpolate is a nice feature.
`This is my ${name}`
I would use double quotes when single quotes cannot be used and vice versa:
"'" + singleQuotedValue + "'"
'"' + doubleQuotedValue + '"'
Instead of:
'\'' + singleQuotedValue + '\''
"\"" + doubleQuotedValue + "\""
There is strictly no difference, so it is mostly a matter of taste and of what is in the string (or if the JavaScript code itself is in a string), to keep number of escapes low.
The speed difference legend might come from PHP world, where the two quotes have different behavior.
The difference is purely stylistic. I used to be a double-quote Nazi. Now I use single quotes in nearly all cases. There's no practical difference beyond how your editor highlights the syntax.
You can use single quotes or double quotes.
This enables you for example to easily nest JavaScript content inside HTML attributes, without the need to escape the quotes.
The same is when you create JavaScript with PHP.
The general idea is: if it is possible use such quotes that you won't need to escape.
Less escaping = better code.
In addition, it seems the specification (currently mentioned at MDN) doesn't state any difference between single and double quotes except closing and some unescaped few characters. However, template literal (` - the backtick character) assumes additional parsing/processing.
A string literal is 0 or more Unicode code points enclosed in single or double quotes. Unicode code points may also be represented by an escape sequence. All code points may appear literally in a string literal except for the closing quote code points, U+005C (REVERSE SOLIDUS), U+000D (CARRIAGE RETURN), and U+000A (LINE FEED). Any code points may appear in the form of an escape sequence. String literals evaluate to ECMAScript String values...
Source: https://tc39.es/ecma262/#sec-literals-string-literals
Does either the single quote (') or double quote (") have a function where they will parse through the string and replace variables with values? I remember that in PHP the parsing engine will parse through the string and automatically switch out any variables with their values (I don't remember which actually has that effect off the top of my head) so you don't have to type "somestring" + aVariableusing the concatenation
operator. in what I have read through so far on http://www.tutorialspoint.com/jquery/jquery-basics.htm I haven't been able to find anything about it. Also unless I missed it the post When to use double or single quotes in JavaScript? does not directly cover this information.
Single quotes and double quotes are identical in JavaScript and do not interpolate variables. In my experience it's good practise to stick with single quotes in JS, allowing you to use double quotes inside those strings (without escaping) for things like HTML attributes.
However, ES2015 introduced "template strings" using backticks, which are somewhat like PHP's strings in that they can interpolate into a string, and are if anything more powerful because they'll actually interpolate any expression, not just plain variables:
let bar = 'bar';
let foo = `${bar}`;
let FOO = `${bar.toUpperCase()}`;
No, there is no such thing as variable interpolation in JavaScript (and therefore jQuery)
And that's a very good thing! While PHP has all variables identified by $ at the start, JavaScript does not. So even a simple string such as "Hello world!" could go horribly wrong if you had a variable called world...
You may be interested in a templating system, of which there are many options out there - a quick Google search will turn up results, but here's a list of some with examples and stuff.
This question already has answers here:
Does JavaScript have literal strings?
(6 answers)
Closed 7 years ago.
In Ruby, if you use single quotes to make a string, the program parses it so that the output is literally what you wrote.
For example, if you create a string the following way:
variable_a = 'my\nname\nis\nOliver\nQueen'
the output of puts variable_a is
>>my\nname\nis\nOliver\nQueen
However, if you instead use double quotes when building the string, like so:
variable_b = "my\nname\nis\nOliver\nQueen"
the output of puts variable_b would be
>>my
>>name
>>is
>>Oliver
>>Queen
I am looking for a way in Javascript that does just what the single quotes do in Ruby, so that there will be less mistakes when trying to properly build a string that contains backslashes, and other characters that would 'break' the intended string.
Single and double quotes in Javascript are equivalent. The only real reason to use one over the other is preference, and avoiding escaping embedded quotes, e.g.
"Don't need to escape this apostrophe."
or
'No need to escape this "quoted" word.'
Unless you are talking about JSON. In JSON you must use double quotes or it is considered a syntax error by many parsers.
Consider the following two alternatives:
console.log("double");
console.log('single');
The former uses double quotes around the string, whereas the latter uses single quotes around the string.
I see more and more JavaScript libraries out there using single quotes when handling strings.
Are these two usages interchangeable? If not, is there an advantage in using one over the other?
The most likely reason for use of single vs. double in different libraries is programmer preference and/or API consistency. Other than being consistent, use whichever best suits the string.
Using the other type of quote as a literal:
alert('Say "Hello"');
alert("Say 'Hello'");
This can get complicated:
alert("It's \"game\" time.");
alert('It\'s "game" time.');
Another option, new in ECMAScript 6, is template literals which use the backtick character:
alert(`Use "double" and 'single' quotes in the same string`);
alert(`Escape the \` back-tick character and the \${ dollar-brace sequence in a string`);
Template literals offer a clean syntax for: variable interpolation, multi-line strings, and more.
Note that JSON is formally specified to use double quotes, which may be worth considering depending on system requirements.
If you're dealing with JSON, it should be noted that strictly speaking, JSON strings must be double quoted. Sure, many libraries support single quotes as well, but I had great problems in one of my projects before realizing that single quoting a string is in fact not according to JSON standards.
There is no one better solution; however, I would like to argue that double quotes may be more desirable at times:
Newcomers will already be familiar with double quotes from their language. In English, we must use double quotes " to identify a passage of quoted text. If we were to use a single quote ', the reader may misinterpret it as a contraction. The other meaning of a passage of text surrounded by the ' indicates the 'colloquial' meaning. It makes sense to stay consistent with pre-existing languages, and this may likely ease the learning and interpretation of code.
Double quotes eliminate the need to escape apostrophes (as in contractions). Consider the string: "I'm going to the mall", vs. the otherwise escaped version: 'I\'m going to the mall'.
Double quotes mean a string in many other languages. When you learn a new language like Java or C, double quotes are always used. In Ruby, PHP and Perl, single-quoted strings imply no backslash escapes while double quotes support them.
JSON notation is written with double quotes.
Nonetheless, as others have stated, it is most important to remain consistent.
Section 7.8.4 of the specification describes literal string notation. The only difference is that DoubleStringCharacter is "SourceCharacter but not double-quote" and SingleStringCharacter is "SourceCharacter but not single-quote". So the only difference can be demonstrated thusly:
'A string that\'s single quoted'
"A string that's double quoted"
So it depends on how much quote escaping you want to do. Obviously the same applies to double quotes in double quoted strings.
I'd like to say the difference is purely stylistic, but I'm really having my doubts. Consider the following example:
/*
Add trim() functionality to JavaScript...
1. By extending the String prototype
2. By creating a 'stand-alone' function
This is just to demonstrate results are the same in both cases.
*/
// Extend the String prototype with a trim() method
String.prototype.trim = function() {
return this.replace(/^\s+|\s+$/g, '');
};
// 'Stand-alone' trim() function
function trim(str) {
return str.replace(/^\s+|\s+$/g, '');
};
document.writeln(String.prototype.trim);
document.writeln(trim);
In Safari, Chrome, Opera, and Internet Explorer (tested in Internet Explorer 7 and Internet Explorer 8), this will return the following:
function () {
return this.replace(/^\s+|\s+$/g, '');
}
function trim(str) {
return str.replace(/^\s+|\s+$/g, '');
}
However, Firefox will yield a slightly different result:
function () {
return this.replace(/^\s+|\s+$/g, "");
}
function trim(str) {
return str.replace(/^\s+|\s+$/g, "");
}
The single quotes have been replaced by double quotes. (Also note how the indenting space was replaced by four spaces.) This gives the impression that at least one browser parses JavaScript internally as if everything was written using double quotes. One might think, it takes Firefox less time to parse JavaScript if everything is already written according to this 'standard'.
Which, by the way, makes me a very sad panda, since I think single quotes look much nicer in code. Plus, in other programming languages, they're usually faster to use than double quotes, so it would only make sense if the same applied to JavaScript.
Conclusion: I think we need to do more research on this.
This might explain Peter-Paul Koch's test results from back in 2003.
It seems that single quotes are sometimes faster in Explorer Windows (roughly 1/3 of my tests did show a faster response time), but if Mozilla shows a difference at all, it handles double quotes slightly faster. I found no difference at all in Opera.
2014: Modern versions of Firefox/Spidermonkey don’t do this anymore.
If you're doing inline JavaScript (arguably a "bad" thing, but avoiding that discussion) single quotes are your only option for string literals, I believe.
E.g., this works fine:
<a onclick="alert('hi');">hi</a>
But you can't wrap the "hi" in double quotes, via any escaping method I'm aware of. Even " which would have been my best guess (since you're escaping quotes in an attribute value of HTML) doesn't work for me in Firefox. " won't work either because at this point you're escaping for HTML, not JavaScript.
So, if the name of the game is consistency, and you're going to do some inline JavaScript in parts of your application, I think single quotes are the winner. Someone please correct me if I'm wrong though.
Technically there's no difference. It's only matter of style and convention.
Douglas Crockford1 recommends using double quotes.
I personally follow that.
Strictly speaking, there is no difference in meaning; so the choice comes down to convenience.
Here are several factors that could influence your choice:
House style: Some groups of developers already use one convention or the other.
Client-side requirements: Will you be using quotes within the strings? (See Ady's answer.)
Server-side language: VB.NET people might choose to use single quotes for JavaScript so that the scripts can be built server-side (VB.NET uses double-quotes for strings, so the JavaScript strings are easy to distinguished if they use single quotes).
Library code: If you're using a library that uses a particular style, you might consider using the same style yourself.
Personal preference: You might think one or other style looks better.
Just keep consistency in what you use. But don't let down your comfort level.
"This is my string."; // :-|
"I'm invincible."; // Comfortable :)
'You can\'t beat me.'; // Uncomfortable :(
'Oh! Yes. I can "beat" you.'; // Comfortable :)
"Do you really think, you can \"beat\" me?"; // Uncomfortable :(
"You're my guest. I can \"beat\" you."; // Sometimes, you've to :P
'You\'re my guest too. I can "beat" you too.'; // Sometimes, you've to :P
ECMAScript 6 update
Using template literal syntax.
`Be "my" guest. You're in complete freedom.`; // Most comfort :D
I hope I am not adding something obvious, but I have been struggling with Django, Ajax, and JSON on this.
Assuming that in your HTML code you do use double quotes, as normally should be, I highly suggest to use single quotes for the rest in JavaScript.
So I agree with ady, but with some care.
My bottom line is:
In JavaScript it probably doesn't matter, but as soon as you embed it inside HTML or the like you start to get troubles. You should know what is actually escaping, reading, passing your string.
My simple case was:
tbox.innerHTML = tbox.innerHTML + '<div class="thisbox_des" style="width:210px;" onmouseout="clear()"><a href="/this/thislist/'
+ myThis[i].pk +'"><img src="/site_media/'
+ myThis[i].fields.thumbnail +'" height="80" width="80" style="float:left;" onmouseover="showThis('
+ myThis[i].fields.left +','
+ myThis[i].fields.right +',\''
+ myThis[i].fields.title +'\')"></a><p style="float:left;width:130px;height:80px;"><b>'
+ myThis[i].fields.title +'</b> '
+ myThis[i].fields.description +'</p></div>'
You can spot the ' in the third field of showThis.
The double quote didn't work!
It is clear why, but it is also clear why we should stick to single quotes... I guess...
This case is a very simple HTML embedding, and the error was generated by a simple copy/paste from a 'double quoted' JavaScript code.
So to answer the question:
Try to use single quotes while within HTML. It might save a couple of debug issues...
It's mostly a matter of style and preference. There are some rather interesting and useful technical explorations in the other answers, so perhaps the only thing I might add is to offer a little worldly advice.
If you're coding in a company or team, then it's probably a good idea to follow the "house style".
If you're alone hacking a few side projects, then look at a few prominent leaders in the community. For example, let's say you getting into Node.js. Take a look at core modules, for example, Underscore.js or express and see what convention they use, and consider following that.
If both conventions are equally used, then defer to your personal preference.
If you don't have any personal preference, then flip a coin.
If you don't have a coin, then beer is on me ;)
I am not sure if this is relevant in today's world, but double quotes used to be used for content that needed to have control characters processed and single quotes for strings that didn't.
The compiler will run string manipulation on a double quoted string while leaving a single quoted string literally untouched. This used to lead to 'good' developers choosing to use single quotes for strings that didn't contain control characters like \n or \0 (not processed within single quotes) and double quotes when they needed the string parsed (at a slight cost in CPU cycles for processing the string).
If you are using JSHint, it will raise an error if you use a double quoted string.
I used it through the Yeoman scafflholding of AngularJS, but maybe there is somehow a manner to configure this.
By the way, when you handle HTML into JavaScript, it's easier to use single quote:
var foo = '<div class="cool-stuff">Cool content</div>';
And at least JSON is using double quotes to represent strings.
There isn't any trivial way to answer to your question.
There isn't any difference between single and double quotes in JavaScript.
The specification is important:
Maybe there are performance differences, but they are absolutely minimum and can change any day according to browsers' implementation. Further discussion is futile unless your JavaScript application is hundreds of thousands lines long.
It's like a benchmark if
a=b;
is faster than
a = b;
(extra spaces)
today, in a particular browser and platform, etc.
Examining the pros and cons
In favor of single quotes
Less visual clutter.
Generating HTML: HTML attributes are usually delimited by double quotes.
elem.innerHTML = 'Hello';
However, single quotes are just as legal in HTML.
elem.innerHTML = "<a href='" + url + "'>Hello</a>";
Furthermore, inline HTML is normally an anti-pattern. Prefer templates.
Generating JSON: Only double quotes are allowed in JSON.
myJson = '{ "hello world": true }';
Again, you shouldn’t have to construct JSON this way. JSON.stringify() is often enough. If not, use templates.
In favor of double quotes
Doubles are easier to spot if you don't have color coding. Like in a console log or some kind of view-source setup.
Similarity to other languages: In shell programming (Bash etc.), single-quoted string literals exist, but escapes are not interpreted inside them. C and Java use double quotes for strings and single quotes for characters.
If you want code to be valid JSON, you need to use double quotes.
In favor of both
There is no difference between the two in JavaScript. Therefore, you can use whatever is convenient at the moment. For example, the following string literals all produce the same string:
"He said: \"Let's go!\""
'He said: "Let\'s go!"'
"He said: \"Let\'s go!\""
'He said: \"Let\'s go!\"'
Single quotes for internal strings and double for external. That allows you to distinguish internal constants from strings that are to be displayed to the user (or written to disk etc.). Obviously, you should avoid putting the latter in your code, but that can’t always be done.
Talking about performance, quotes will never be your bottleneck. However, the performance is the same in both cases.
Talking about coding speed, if you use ' for delimiting a string, you will need to escape " quotes. You are more likely to need to use " inside the string. Example:
// JSON Objects:
var jsonObject = '{"foo":"bar"}';
// HTML attributes:
document.getElementById("foobar").innerHTML = '<input type="text">';
Then, I prefer to use ' for delimiting the string, so I have to escape fewer characters.
There are people that claim to see performance differences: old mailing list thread. But I couldn't find any of them to be confirmed.
The main thing is to look at what kind of quotes (double or single) you are using inside your string. It helps to keep the number of escapes low. For instance, when you are working with HTML content inside your strings, it is easier to use single quotes so that you don't have to escape all double quotes around the attributes.
When using CoffeeScript I use double quotes. I agree that you should pick either one and stick to it. CoffeeScript gives you interpolation when using the double quotes.
"This is my #{name}"
ECMAScript 6 is using back ticks (`) for template strings. Which probably has a good reason, but when coding, it can be cumbersome to change the string literals character from quotes or double quotes to backticks in order to get the interpolation feature. CoffeeScript might not be perfect, but using the same string literals character everywhere (double quotes) and always be able to interpolate is a nice feature.
`This is my ${name}`
I would use double quotes when single quotes cannot be used and vice versa:
"'" + singleQuotedValue + "'"
'"' + doubleQuotedValue + '"'
Instead of:
'\'' + singleQuotedValue + '\''
"\"" + doubleQuotedValue + "\""
There is strictly no difference, so it is mostly a matter of taste and of what is in the string (or if the JavaScript code itself is in a string), to keep number of escapes low.
The speed difference legend might come from PHP world, where the two quotes have different behavior.
The difference is purely stylistic. I used to be a double-quote Nazi. Now I use single quotes in nearly all cases. There's no practical difference beyond how your editor highlights the syntax.
You can use single quotes or double quotes.
This enables you for example to easily nest JavaScript content inside HTML attributes, without the need to escape the quotes.
The same is when you create JavaScript with PHP.
The general idea is: if it is possible use such quotes that you won't need to escape.
Less escaping = better code.
In addition, it seems the specification (currently mentioned at MDN) doesn't state any difference between single and double quotes except closing and some unescaped few characters. However, template literal (` - the backtick character) assumes additional parsing/processing.
A string literal is 0 or more Unicode code points enclosed in single or double quotes. Unicode code points may also be represented by an escape sequence. All code points may appear literally in a string literal except for the closing quote code points, U+005C (REVERSE SOLIDUS), U+000D (CARRIAGE RETURN), and U+000A (LINE FEED). Any code points may appear in the form of an escape sequence. String literals evaluate to ECMAScript String values...
Source: https://tc39.es/ecma262/#sec-literals-string-literals
This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
When to Use Double or Single Quotes in JavaScript
In Javascript, you can either use double quotes or single quotes around strings, and it means exactly the same thing:
var a = 'hello';
var b = "hello";
alert(a === b); //alerts true
I was reading some of Douglas Crockford's code, and it looks like he usually uses single quotes around string literals.
Further, most of the high rep people who answer Javascript questions around here seem to use single quotes around strings (example).
Since I usually use double quotes around strings (mostly just out of habit), I'm starting to feel self-conscious about all the answers I've given here that use double quotes. I haven't heard of any particular reason why one should use one over the other, since, as far as I can tell, they are interchangeable.
Is there a reason why all of the Javascript ninjas use single quotes? Should I use single quotes too? Will there be some unexpected fatal consequences if I continue using double quotes?
Strings ideally are enclosed in double quotes. There are cases where you want to use single quotes when you're wrapping text that has double quotes within them like:
var txt = 'This "should" be escaped';
Without single quotes, you'd need to escape the double quotes which makes them bit ugly (matter of taste though).
If you're in ASP.Net world, usually to workaround the nastiness of DataBinder expression, you wrap strings in single quotes.
Plus I find single quotes easier to type.
Another place where you must use double quotes is constructing JSON objects:
var obj = { "a": 1 }; // valid
var obj = { 'a': 1 }; // invalid
Either way, being consistent is most important. Choose one style and stick to it throughout the code (except when you run into escaping issues).
You can choose either one, the main thing is to be consistant.
They can be used interchangably however most languges such as c# " needs to be escaped however ' does not so its slightly simpler to use '
I believe that is is a primarily stylistic choice, however when it comes to quote or string escaping it can affect your string.
Overall, ensure that you are consistent whichever method you chose.