Here, I've three radio group in a single page. But in the entire page I want to select only one radio option. Like if I'm selecting Monday then Tuesday selection should be unchecked automatically. How can I proceed with the logic, below logic is not working as expected.
sample JSON :
{
report:[
{
day:'Monday',
slot:[
'9-10am',
'10-11am',
'11-12am'
]
},{
day:'Tuesday',
slot:[
'9-10am',
'10-11am',
'11-12am'
]
},{
day:'Wednesday',
slot:[
'9-10am',
'10-11am',
'11-12am'
]
}
]}
JS code
for(var I=0; I<reports.length; I++){
var radios = document.getElementsByTagName('input')
if(radios[I].type === 'radio' && radios[I].checked){
document.getElementById(radios[I].id).checked = false
}
If you're able to create radio buttons in SurveyJS, you should be able to give the button group a name, so there would be no need for any additional JavaScript. Check out their documentation for an example.
Looks like the sort of nested structure you have for the buttons could be achieved with something like a dynamic panel or cascading conditions in SurveyJS. You should be able to render the available time slots dynamically with "visibleIf" based on the selected day.
I would definitely dig around the documentation of SurveyJS to find a solution there rather than hacking your way around it. But solely as an exercise, the problem in your current code could be that you're selecting a button by ID, which will not work correctly if you have tried to give the same ID to multiple buttons. After all, you already have the target button as radios[I], so you could just use radios[I].checked = false. Or the issue could be that you're unchecking the selected button AFTER the new selection has been made, which might actually uncheck the button you just clicked. Hard to say without additional information, but in any case, looping your inputs based on a value that might be something else than the actual number of inputs (you're using reports.length) is probably not the best idea, since that value might be different from the number of inputs in your form, which would mean that not all of them are included in the loop. Here are a couple of examples of what you could do instead:
// Get all radio buttons
const radioButtons = document.querySelectorAll('input[type="radio"]')
// If you need to uncheck the previously selected one (don't do this if you can avoid it!)
radioButtons.forEach(radioButton => {
// Use a mousedown event instead of click
// This gives you time to uncheck the previous one before the new one gets checked
radioButton.addEventListener('mousedown', () => {
// Get the currently selected button and uncheck it
const currentlySelected = document.querySelector('input[type="radio"]:checked')
if (currentlySelected) currentlySelected.checked = false
})
})
// You can add further options to the querySelector, such as [name]
// This gets the currently selected button in the specified group
const checkedRadioButton = document.querySelector('input[type="radio"][name="group-name"]:checked')
Here's a fiddle demonstrating this sort of "fake" radio button functionality (without a "name" attribute).
You can give all these radio buttons the same name, then one radio only will be checked.
Related
So I created the following script to select all check boxes on a page
(function(d) {
var input = d.querySelectorAll('input[type="checkbox"]');
var i = input.length;
while (i--) {
input[i].checked = true;
}
})(this.document);
It does work to do that, however when trying it in Quickbooks while it does select all the boxes, the website does not register it as actually being selected (the total cost at the bottom remains the same, its like it superficially checks the boxes, visually only with no actual register). Any help would be great.
EDIT: Maybe simulating a click instead of changing the box values?
The only thing that changes when physically selecting a box is the value posted below changes to true from false
You should do :
input[i].setAttribute("checked", "");
The checked attribute is a boolean attribute, so the standard way to add it to an element is to pass an empty string for value.
https://developer.mozilla.org/fr/docs/Web/API/Element/setAttribute#Exemple
I have and issue that i can't wrap my head around, so i hope i could get some help and new knowlage to use.
i am building a form, where the user needs to book an item, but once selected i will not have it been able to be selected again.
so what my plan was, is to have a dropdown menu , that you can select what ever from, if you want one item more , you click a button and get a new dropdown menu, allowing you to select a new item, but this new dropdown, should not contain the item from the first dropdown.
i had tried to build a thing like this
$(function() {
$('.dropdown').change(function() {
dropdownvalue = $(this).val();
$('.dropdown').not(this).find('option[value="' + dropdownvalue + '"]').remove();
});
});
https://jsfiddle.net/loonitun/tya85x4j/2/
How ever, if my user changes mind, the option is now gone, even if something else is selected ( i know it is the Remove part in the javascript, but i am unsure how to restore the previous option )
if anyone have an solution, or some guidence to how i can get it done i would apreciate it very much.
an alternative solution i had in my mind, that may work, was to do an onchange add to array, but then i would need another dropdown to remove items from that array, and i think that may confuse the user.
What you want to do is - filter your options when you select someting instead of removing them from the array.
for example
let options = [1, 2, 3, 4] // this is an array of options with ids
let valuesSelected = []; // once you choose a value from the dropdown you need to push it to valuesSelectedArray
Every time you choose something in a dropdown you need to filter this value out of you options array
options.filter(option => !valuesSelected.includes(option))
this will give you array of options without values you already selected.
I am kinda drawing a blank on this one facet, and I can't seem to quite figure it out.
So I have a simple HTML select => option element which is populated from the back-end (not really relevant tho)
My question is this:
Let's say I have a pre-made object such as this:
{
keyName1: 450,
keyName2: 800,
keyName3: 300
}
What I want to do is to check if the key name matches a name of an option value in my multi-select dropdown (the values come from an array, using 'ng-repeat' on the option), and if the option value matches the key, add the number value to some sort of increment variable, so I can display the total number of 'keyNames' found.
For example - if a user selects 'keyName1' the incrementer value will total 450. If a user selects 'keyName1' and 'keyName2' the incrementer value will total 1,250.
I am lost on how to accomplish this - right now it is reading only the very first item in the dropdown.
Here is the code doing that:
_.forEach($scope.widget.instance.settings.serviceContractTypes, function (type) {
// if item in array matches what is selected in multi-select option
if(type === $('#contractType:selected').text().trim()) {
// do stuff
}
});
Hope this all made sense, and thanks very much for any direction you might offer...
(does not have to utilize lodash, I'm just used to using it)
jQuery's :selected selector only works for HTML options:
"The :selected selector works for elements. It does not work for checkboxes or radio inputs; use :checked for them."
(https://api.jquery.com/selected-selector/)
You say "I have a simple HTML select => option element which is populated from the back-end (not really relevant tho)"
This could be relevant. By default, an HTML option tag does not support multiple selections; it has to explicitly be created as a select multiple in order to support that. Can you share the HTML code for the option to make it clear whether that's a problem or this is a red herring?
Also, can you echo $scope.widget.instance.settings.serviceContractTypes and share to make sure it's actually matching what's available in the text of the options?
ADDENDUM - Wait, I think I figured it out!
The $('#contractType:selected') selects all the selected options in #contractType and concatenates them. Then $('#contractType:selected').text().trim() trims this down to the first word, which is just the first selected option. You should do something like $('#contractType:selected').text().split(" ") and then check if each type is in the resulting list.
I've read the jquery documentation and it seems like input elements like checkbox, radio and multiple selects will not be serialized if they are blank.
I've also read this thread. jQuery serialize does not register checkboxes which has given me quite good information about the problem.
But what I want here is, "Is there any elegant solution to this problem?", I just want a blank value if those elements are left blank.
Any suggestions would be great.
On the same example this is also mention. Try this:
/* Get input values from form */
values = jQuery("#myform").serializeArray();
/* Because serializeArray() ignores unset checkboxes and radio buttons: */
values = values.concat(
jQuery('#myform input[type=checkbox]:not(:checked)').map(
function() {
return {"name": this.name, "value": 'off'}
}).get()
);
I am trying to add javascript validation to a bunch of check boxes, basically what I want is as soon as the user has selected 3 tickboxes, it should disable all of the tickboxes except the three that were ticked.
How could I go about doing that?
Thanx in advance!
The following will disable the rest of the checkboxes if you select 3 of them, and also enable them once you uncheck one of the three selected..
$(':checkbox').click(
function(){
var selected = $(':checkbox:checked').length;
if (selected == 3)
{
$(':checkbox:not(:checked)').attr('disabled',true);
}
else
{
$(':checkbox:not(:checked)').attr('disabled',false);
}
}
);
Live demo
Have on onclick handler that when a checkbox is clicked it ups a counter by one if it is unchecked it decreases the count. After raising the count, test to see if it is three. Then probably the easiest method is to either save the ids of the three checked boxes or save them in the previous step. Then change the click event to return true only if the ids match the saved ids.
Sorry I don't have time right now to actually write up any code. Hopefully this will get you started.
jQuery
$("#container :checkbox").click(function(){
if ($("#container :checkbox").length >= 3) {
$("#container :checkbox").attr("disabled", "disabled");
}
});