How do i make a javascript fuction repeat every few seconds? [duplicate] - javascript

I want repeat this code every 4 seconds, how i can do it with javascript or jquery easly ? Thanks. :)
$.get("request2.php", function(vystup){
if (vystup !== ""){
$("#prompt").html(vystup);
$("#prompt").animate({"top": "+=25px"}, 500).delay(2000).animate({"top": "-=25px"}, 500).delay(500).html("");
}
});

Use setInterval function
setInterval( fn , miliseconds )
From MDC docs:
Summary
Calls a function repeatedly, with a fixed time delay between each call to that function.
Syntax
var intervalID = window.setInterval(func, delay[, param1, param2, ...]);
var intervalID = window.setInterval(code, delay);
where
intervalID is a unique interval ID you can pass to clearInterval().
func is the function you want to be called repeatedly.
code in the alternate syntax, is a string of code you want to be executed repeatedly. (Using this syntax is not recommended for the same reasons as using eval())
delay is the number of milliseconds (thousandths of a second) that the setInterval() function should wait before each call to func. As with setTimeout, there is a minimum delay enforced.
Note that passing additional parameters to the function in the first syntax does not work in Internet Explorer.
Example
// alerts "Hey" every second
setInterval(function() { alert("Hey"); }, 1000);

setInterval(function(){
// your code...
}, 4000);

It's not too hard in javascript.
// declare your variable for the setInterval so that you can clear it later
var myInterval;
// set your interval
myInterval = setInterval(whichFunction,4000);
whichFunction{
// function code goes here
}
// this code clears your interval (myInterval)
window.clearInterval(myInterval);
Hope this helps!

Another possibility is to use setTimeout, but place it along with your code in a function that gets called recursively in the callback to the $.get() request.
This will ensure that the requests are a minimum of 4 seconds apart since the next request will not begin until the previous response was received.
// v--------place your code in a function
function get_request() {
$.get("request2.php", function(vystup){
if (vystup !== ""){
$("#prompt").html(vystup)
.animate({"top": "+=25px"}, 500)
.delay(2000)
.animate({"top": "-=25px"}, 500)
.delay(500)
.html("");
}
setTimeout( get_request, 4000 ); // <-- when you ge a response, call it
// again after a 4 second delay
});
}
get_request(); // <-- start it off

const milliseconds = 4000
setInterval(
() => {
// self executing repeated code below
}, milliseconds);

Call a Javascript function every 2 second continuously for 20 second.
var intervalPromise;
$scope.startTimer = function(fn, delay, timeoutTime) {
intervalPromise = $interval(function() {
fn();
var currentTime = new Date().getTime() - $scope.startTime;
if (currentTime > timeoutTime){
$interval.cancel(intervalPromise);
}
}, delay);
};
$scope.startTimer(hello, 2000, 10000);
hello(){
console.log("hello");
}

Related

html - Setting a timer in javascript [duplicate]

I’ve got a search field. Right now it searches for every keyup. So if someone types “Windows”, it will make a search with AJAX for every keyup: “W”, “Wi”, “Win”, “Wind”, “Windo”, “Window”, “Windows”.
I want to have a delay, so it only searches when the user stops typing for 200 ms.
There is no option for this in the keyup function, and I have tried setTimeout, but it didn’t work.
How can I do that?
I use this small function for the same purpose, executing a function after the user has stopped typing for a specified amount of time or in events that fire at a high rate, like resize:
function delay(callback, ms) {
var timer = 0;
return function() {
var context = this, args = arguments;
clearTimeout(timer);
timer = setTimeout(function () {
callback.apply(context, args);
}, ms || 0);
};
}
// Example usage:
$('#input').keyup(delay(function (e) {
console.log('Time elapsed!', this.value);
}, 500));
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<label for="input">Try it:
<input id="input" type="text" placeholder="Type something here..."/>
</label>
How it works:
The delay function will return a wrapped function that internally handles an individual timer, in each execution the timer is restarted with the time delay provided, if multiple executions occur before this time passes, the timer will just reset and start again.
When the timer finally ends, the callback function is executed, passing the original context and arguments (in this example, the jQuery's event object, and the DOM element as this).
UPDATE 2019-05-16
I have re-implemented the function using ES5 and ES6 features for modern environments:
function delay(fn, ms) {
let timer = 0
return function(...args) {
clearTimeout(timer)
timer = setTimeout(fn.bind(this, ...args), ms || 0)
}
}
The implementation is covered with a set of tests.
For something more sophisticated, give a look to the jQuery Typewatch plugin.
If you want to search after the type is done use a global variable to hold the timeout returned from your setTimout call and cancel it with a clearTimeout if it hasn't yet happend so that it won't fire the timeout except on the last keyup event
var globalTimeout = null;
$('#id').keyup(function(){
if(globalTimeout != null) clearTimeout(globalTimeout);
globalTimeout =setTimeout(SearchFunc,200);
}
function SearchFunc(){
globalTimeout = null;
//ajax code
}
Or with an anonymous function :
var globalTimeout = null;
$('#id').keyup(function() {
if (globalTimeout != null) {
clearTimeout(globalTimeout);
}
globalTimeout = setTimeout(function() {
globalTimeout = null;
//ajax code
}, 200);
}
Another slight enhancement on CMS's answer. To easily allow for separate delays, you can use the following:
function makeDelay(ms) {
var timer = 0;
return function(callback){
clearTimeout (timer);
timer = setTimeout(callback, ms);
};
};
If you want to reuse the same delay, just do
var delay = makeDelay(250);
$(selector1).on('keyup', function() {delay(someCallback);});
$(selector2).on('keyup', function() {delay(someCallback);});
If you want separate delays, you can do
$(selector1).on('keyup', function() {makeDelay(250)(someCallback);});
$(selector2).on('keyup', function() {makeDelay(250)(someCallback);});
You could also look at underscore.js, which provides utility methods like debounce:
var lazyLayout = _.debounce(calculateLayout, 300);
$(window).resize(lazyLayout);
Explanation
Use a variable to store the timeout function. Then use clearTimeout() to clear this variable of any active timeout functions, and then use setTimeout() to set the active timeout function again. We run clearTimeout() first, because if a user is typing "hello", we want our function to run shortly after the user presses the "o" key (and not once for each letter).
Working Demo
Super simple approach, designed to run a function after a user has finished typing in a text field...
$(document).ready(function(e) {
var timeout;
var delay = 2000; // 2 seconds
$('.text-input').keyup(function(e) {
$('#status').html("User started typing!");
if(timeout) {
clearTimeout(timeout);
}
timeout = setTimeout(function() {
myFunction();
}, delay);
});
function myFunction() {
$('#status').html("Executing function for user!");
}
});
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
Status: <span id="status">Default Status</span><br>
<textarea name="text-input" class="text-input"></textarea>
Based on the answer of CMS, I made this :
Put the code below after include jQuery :
/*
* delayKeyup
* http://code.azerti.net/javascript/jquery/delaykeyup.htm
* Inspired by CMS in this post : http://stackoverflow.com/questions/1909441/jquery-keyup-delay
* Written by Gaten
* Exemple : $("#input").delayKeyup(function(){ alert("5 secondes passed from the last event keyup."); }, 5000);
*/
(function ($) {
$.fn.delayKeyup = function(callback, ms){
var timer = 0;
$(this).keyup(function(){
clearTimeout (timer);
timer = setTimeout(callback, ms);
});
return $(this);
};
})(jQuery);
And simply use like this :
$('#input').delayKeyup(function(){ alert("5 secondes passed from the last event keyup."); }, 5000);
Careful : the $(this) variable in the function passed as a parameter does not match input
jQuery:
var timeout = null;
$('#input').keyup(function() {
clearTimeout(timeout);
timeout = setTimeout(() => {
console.log($(this).val());
}, 1000);
});
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/2.2.4/jquery.min.js"></script>
<input type="text" id="input" placeholder="Type here..."/>
Pure Javascript:
let input = document.getElementById('input');
let timeout = null;
input.addEventListener('keyup', function (e) {
clearTimeout(timeout);
timeout = setTimeout(function () {
console.log('Value:', input.value);
}, 1000);
});
<input type="text" id="input" placeholder="Type here..."/>
Delay Multi Function Calls using Labels
This is the solution i work with. It will delay the execution on ANY function you want. It can be the keydown search query, maybe the quick click on previous or next buttons ( that would otherwise send multiple request if quickly clicked continuously , and be not used after all). This uses a global object that stores each execution time, and compares it with the most current request.
So the result is that only that last click / action will actually be called, because those requests are stored in a queue, that after the X milliseconds is called if no other request with the same label exists in the queue!
function delay_method(label,callback,time){
if(typeof window.delayed_methods=="undefined"){window.delayed_methods={};}
delayed_methods[label]=Date.now();
var t=delayed_methods[label];
setTimeout(function(){ if(delayed_methods[label]!=t){return;}else{ delayed_methods[label]=""; callback();}}, time||500);
}
You can set your own delay time ( its optional, defaults to 500ms). And send your function arguments in a "closure fashion".
For example if you want to call the bellow function:
function send_ajax(id){console.log(id);}
To prevent multiple send_ajax requests, you delay them using:
delay_method( "check date", function(){ send_ajax(2); } ,600);
Every request that uses the label "check date" will only be triggered if no other request is made in the 600 miliseconds timeframe. This argument is optional
Label independency (calling the same target function) but run both:
delay_method("check date parallel", function(){send_ajax(2);});
delay_method("check date", function(){send_ajax(2);});
Results in calling the same function but delay them independently because of their labels being different
If someone like to delay the same function, and without external variable he can use the next script:
function MyFunction() {
//Delaying the function execute
if (this.timer) {
window.clearTimeout(this.timer);
}
this.timer = window.setTimeout(function() {
//Execute the function code here...
}, 500);
}
This function extends the function from Gaten's answer a bit in order to get the element back:
$.fn.delayKeyup = function(callback, ms){
var timer = 0;
var el = $(this);
$(this).keyup(function(){
clearTimeout (timer);
timer = setTimeout(function(){
callback(el)
}, ms);
});
return $(this);
};
$('#input').delayKeyup(function(el){
//alert(el.val());
// Here I need the input element (value for ajax call) for further process
},1000);
http://jsfiddle.net/Us9bu/2/
I'm surprised that nobody mention the problem with multiple input in CMS's very nice snipped.
Basically, you would have to define delay variable individually for each input. Otherwise if sb put text to first input and quickly jump to other input and start typing, callback for the first one WON'T be called!
See the code below I came with based on other answers:
(function($) {
/**
* KeyUp with delay event setup
*
* #link http://stackoverflow.com/questions/1909441/jquery-keyup-delay#answer-12581187
* #param function callback
* #param int ms
*/
$.fn.delayKeyup = function(callback, ms){
$(this).keyup(function( event ){
var srcEl = event.currentTarget;
if( srcEl.delayTimer )
clearTimeout (srcEl.delayTimer );
srcEl.delayTimer = setTimeout(function(){ callback( $(srcEl) ); }, ms);
});
return $(this);
};
})(jQuery);
This solution keeps setTimeout reference within input's delayTimer variable. It also passes reference of element to callback as fazzyx suggested.
Tested in IE6, 8(comp - 7), 8 and Opera 12.11.
This worked for me where I delay the search logic operation and make a check if the value is same as entered in text field. If value is same then I go ahead and perform the operation for the data related to search value.
$('#searchText').on('keyup',function () {
var searchValue = $(this).val();
setTimeout(function(){
if(searchValue == $('#searchText').val() && searchValue != null && searchValue != "") {
// logic to fetch data based on searchValue
}
else if(searchValue == ''){
// logic to load all the data
}
},300);
});
Delay function to call up on every keyup.
jQuery 1.7.1 or up required
jQuery.fn.keyupDelay = function( cb, delay ){
if(delay == null){
delay = 400;
}
var timer = 0;
return $(this).on('keyup',function(){
clearTimeout(timer);
timer = setTimeout( cb , delay );
});
}
Usage: $('#searchBox').keyupDelay( cb );
From ES6, one can use arrow function syntax as well.
In this example, the code delays keyup event for 400ms after users finish typeing before calling searchFunc make a query request.
const searchbar = document.getElementById('searchBar');
const searchFunc = // any function
// wait ms (milliseconds) after user stops typing to execute func
const delayKeyUp = (() => {
let timer = null;
const delay = (func, ms) => {
timer ? clearTimeout(timer): null
timer = setTimeout(func, ms)
}
return delay
})();
searchbar.addEventListener('keyup', (e) => {
const query = e.target.value;
delayKeyUp(() => {searchFunc(query)}, 400);
})
Updated Typescript version:
const delayKeyUp = (() => {
let timer: NodeJS.Timeout;
return (func: Function, ms: number) => {
timer ? clearTimeout(timer) : null;
timer = setTimeout(() => func(), ms);
};
})();
This is a solution along the lines of CMS's, but solves a few key issues for me:
Supports multiple inputs, delays can run concurrently.
Ignores key events that didn't changed the value (like Ctrl, Alt+Tab).
Solves a race condition (when the callback is executed and the value already changed).
var delay = (function() {
var timer = {}
, values = {}
return function(el) {
var id = el.form.id + '.' + el.name
return {
enqueue: function(ms, cb) {
if (values[id] == el.value) return
if (!el.value) return
var original = values[id] = el.value
clearTimeout(timer[id])
timer[id] = setTimeout(function() {
if (original != el.value) return // solves race condition
cb.apply(el)
}, ms)
}
}
}
}())
Usage:
signup.key.addEventListener('keyup', function() {
delay(this).enqueue(300, function() {
console.log(this.value)
})
})
The code is written in a style I enjoy, you may need to add a bunch of semicolons.
Things to keep in mind:
A unique id is generated based on the form id and input name, so they must be defined and unique, or you could adjust it to your situation.
delay returns an object that's easy to extend for your own needs.
The original element used for delay is bound to the callback, so this works as expected (like in the example).
Empty value is ignored in the second validation.
Watch out for enqueue, it expects milliseconds first, I prefer that, but you may want to switch the parameters to match setTimeout.
The solution I use adds another level of complexity, allowing you to cancel execution, for example, but this is a good base to build on.
Combining CMS answer with Miguel's one yields a robust solution allowing concurrent delays.
var delay = (function(){
var timers = {};
return function (callback, ms, label) {
label = label || 'defaultTimer';
clearTimeout(timers[label] || 0);
timers[label] = setTimeout(callback, ms);
};
})();
When you need to delay different actions independently, use the third argument.
$('input.group1').keyup(function() {
delay(function(){
alert('Time elapsed!');
}, 1000, 'firstAction');
});
$('input.group2').keyup(function() {
delay(function(){
alert('Time elapsed!');
}, 1000, '2ndAction');
});
Building upon CMS's answer here's new delay method which preserves 'this' in its usage:
var delay = (function(){
var timer = 0;
return function(callback, ms, that){
clearTimeout (timer);
timer = setTimeout(callback.bind(that), ms);
};
})();
Usage:
$('input').keyup(function() {
delay(function(){
alert('Time elapsed!');
}, 1000, this);
});
If you want to do something after a period of time and reset that timer after a specific event like keyup, the best solution is made with clearTimeout and setTimeout methods:
// declare the timeout variable out of the event listener or in the global scope
var timeout = null;
$(".some-class-or-selector-to-bind-event").keyup(function() {
clearTimeout(timout); // this will clear the recursive unneccessary calls
timeout = setTimeout(() => {
// do something: send an ajax or call a function here
}, 2000);
// wait two seconds
});
Use
mytimeout = setTimeout( expression, timeout );
where expression is the script to run and timeout is the time to wait in milliseconds before it runs - this does NOT hault the script, but simply delays execution of that part until the timeout is done.
clearTimeout(mytimeout);
will reset/clear the timeout so it does not run the script in expression (like a cancel) as long as it has not yet been executed.
Based on the answer of CMS, it just ignores the key events that doesn't change value.
var delay = (function(){
var timer = 0;
return function(callback, ms){
clearTimeout (timer);
timer = setTimeout(callback, ms);
};
})();
var duplicateFilter=(function(){
var lastContent;
return function(content,callback){
content=$.trim(content);
if(content!=lastContent){
callback(content);
}
lastContent=content;
};
})();
$("#some-input").on("keyup",function(ev){
var self=this;
delay(function(){
duplicateFilter($(self).val(),function(c){
//do sth...
console.log(c);
});
}, 1000 );
})
User lodash javascript library and use _.debounce function
changeName: _.debounce(function (val) {
console.log(val)
}, 1000)
Use the bindWithDelay jQuery plugin:
element.bindWithDelay(eventType, [ eventData ], handler(eventObject), timeout, throttle)
var globalTimeout = null;
$('#search').keyup(function(){
if(globalTimeout != null) clearTimeout(globalTimeout);
globalTimeout =setTimeout(SearchFunc,200);
});
function SearchFunc(){
globalTimeout = null;
console.log('Search: '+$('#search').val());
//ajax code
};
Here is a suggestion I have written that takes care of multiple input in your form.
This function gets the Object of the input field, put in your code
function fieldKeyup(obj){
// what you want this to do
} // fieldKeyup
This is the actual delayCall function, takes care of multiple input fields
function delayCall(obj,ms,fn){
return $(obj).each(function(){
if ( typeof this.timer == 'undefined' ) {
// Define an array to keep track of all fields needed delays
// This is in order to make this a multiple delay handling
function
this.timer = new Array();
}
var obj = this;
if (this.timer[obj.id]){
clearTimeout(this.timer[obj.id]);
delete(this.timer[obj.id]);
}
this.timer[obj.id] = setTimeout(function(){
fn(obj);}, ms);
});
}; // delayCall
Usage:
$("#username").on("keyup",function(){
delayCall($(this),500,fieldKeyup);
});
Take a look at the autocomplete plugin. I know that it allows you to specify a delay or a minimum number of characters. Even if you don't end up using the plugin, looking through the code will give you some ideas on how to implement it yourself.
Well, i also made a piece of code for limit high frequency ajax request cause by Keyup / Keydown. Check this out:
https://github.com/raincious/jQueue
Do your query like this:
var q = new jQueue(function(type, name, callback) {
return $.post("/api/account/user_existed/", {Method: type, Value: name}).done(callback);
}, 'Flush', 1500); // Make sure use Flush mode.
And bind event like this:
$('#field-username').keyup(function() {
q.run('Username', this.val(), function() { /* calling back */ });
});
Saw this today a little late but just want to put this here in case someone else needed. just separate the function to make it reusable. the code below will wait 1/2 second after typing stop.
var timeOutVar
$(selector).on('keyup', function() {
clearTimeout(timeOutVar);
timeOutVar= setTimeout(function(){ console.log("Hello"); }, 500);
});
// Get an global variable isApiCallingInProgress
// check isApiCallingInProgress
if (!isApiCallingInProgress) {
// set it to isApiCallingInProgress true
isApiCallingInProgress = true;
// set timeout
setTimeout(() => {
// Api call will go here
// then set variable again as false
isApiCallingInProgress = false;
}, 1000);
}

Wait before a javascript function can be called again

I've looked at many different solutions to this, none of which worked. I know it has something to do with setTimeout, but I don't know how to implement it properly.
function myfunction()
{
//the function
//wait for 1 second before it can be ran again
}
To clarify: I don't want to call the function at a regular interval, I want to be able to enforce a delay before the function can be called again.
var lastTime = 0;
function myFunction() {
var now = new Date().getTime(); // Time in milliseconds
if (now - lasttime < 1000) {
return;
} else {
lastTime = now;
}
// rest of function
}
You don't need to use setTimeout at all. The following is similar to other answers, but uses a closure to remember the last time the function ran rather than a global variable.
var myFunction = function() {
var lastTime = new Date();
return function() {
var now = new Date();
if ((now - lastTime) < 1000) return;
lastTime = now;
/* do stuff */
};
}());
I think the easiest solution would be to hold a boolean variable and reset it to true after a given delay.
fiddle
HTML
<button id="clickme">click me!</button>
JavaScript
var canGo = true,
delay = 1000; // one second
var myFunction = function () {
if (canGo) {
canGo = false;
// do whatever you want
alert("Hi!");
setTimeout(function () {
canGo = true;
}, delay)
} else {
alert("Can't go!");
}
}
$("#clickme").click(function(){
myFunction();
})
With this, you hold a boolean, canGo, and set it to true. If the function is run, it sets canGo to false and sets a setTimeout() for a time period of delay, in milliseconds. If you try to run the function again, it won't run and will, instead, alert("Can't go!"). This was just for demonstrative purposes; you don't need that part. After delay, canGo will be set to true, and you will be able to once more run the function.
var lastRan = 0;
var myFunction = function() {
var now = Date.now();
if(now-lastRan < 1000) {
return;
}
lastRan = now;
//rest of function
};
You may want to use throttle or debounce from underscore.js
http://underscorejs.org/#throttle
throttle_.throttle(function, wait, [options])
Creates and returns a
new, throttled version of the passed function, that, when invoked
repeatedly, will only actually call the original function at most once
per every wait milliseconds. Useful for rate-limiting events that
occur faster than you can keep up with.
By default, throttle will execute the function as soon as you call it
for the first time, and, if you call it again any number of times
during the wait period, as soon as that period is over. If you'd like
to disable the leading-edge call, pass {leading: false}, and if you'd
like to disable the execution on the trailing-edge, pass {trailing:
false}.
var throttled = _.throttle(updatePosition, 100);
$(window).scroll(throttled);
http://underscorejs.org/#debounce
debounce_.debounce(function, wait, [immediate])
Creates and returns a
new debounced version of the passed function which will postpone its
execution until after wait milliseconds have elapsed since the last
time it was invoked. Useful for implementing behavior that should only
happen after the input has stopped arriving. For example: rendering a
preview of a Markdown comment, recalculating a layout after the window
has stopped being resized, and so on.
Pass true for the immediate parameter to cause debounce to trigger the
function on the leading instead of the trailing edge of the wait
interval. Useful in circumstances like preventing accidental
double-clicks on a "submit" button from firing a second time.
var lazyLayout = _.debounce(calculateLayout, 300);
$(window).resize(lazyLayout);
If you just want to run your function again after a set time, you can use setTimeout and pass it the function to run and the delay period in milliseconds.
function myfunction() {
//the function
//run again in one second
setTimeout(myfunction, 1000);
}
Edited based on poster's comments:
var waiting = false;
var myfunction = function() {
if (!waiting) {
//Run some code
waiting = setTimeout(function() {
waiting = false;
}, 1000);
}
};

javascript wait specific amount of time before executing a function

is there any way to delay a function in javascript I want to do such thing:
function showLabel(){
document.getElementById(id).show();
wait(5000); //wait 5 sec
document.getElementById(id).hide();
}
I want to show a label for 5 sec if this function is called, there may be another way to do so.
Note: I can't use jQuery
Hint: Use setTimeout
window.setTimeout("javascript function", milliseconds);
Read the docs and find out how to do it: https://developer.mozilla.org/en/docs/Web/API/window.setTimeout
If you want something like sleep then:
function sleep(millis, callback) {
setTimeout(function()
{ callback(); }
, milliseconds);
}
I'd prefer:
function doStuff()
{
//do some things
setTimeout(continueExecution, 10000) //wait ten seconds before continuing
}
function continueExecution()
{
//finish doing things after the pause
}
Another way using loop
<script type="text/javascript">
// bad implementation
function sleep(milliSeconds){
var startTime = new Date().getTime(); // get the current time
while (new Date().getTime() < startTime + milliSeconds); // hog cpu
}
</script>
You may try this:
function showLabel(){
document.getElementById(id).show();
setTimeout(function()
{
document.getElementById(id).hide();
}, 5000);
}
Use setTimeout for one time task, else setInterval for repetitive task.
use setTimeout function in javascript. and clear the time out one the function call over
var timerId = setTimeout(function showLabel(){
document.getElementById(id).show();
document.getElementById(id).hide();
}, 5000);
clearTimeout(timerId);
setTimeout(
function(){ Your_function }, milliseconds
);
This calls the function after the given time is up.

setTimeout functionality is not working

I am trying to use the jQuery setTimeout in order to call a method each x time interval:
$('.text').blur(function () {
doSmth();
});
$('.text').bind("paste", function (e) {
setTimeout(function () {
doSmth();
}, 5);
});
The timeout is not working , please advice !
What do you mean with "it's not working"?Anyway setTimeout() is a Javascript function that triggers only once after the specified interval.
If you wan't to trigger something every five second you should do:
var interval = setInterval(doSmth, 5000);
Where doSmth is a function defined elsewhere and 5000 is the number of millisecond of the interval. If yo want to stop the execution just do:
clearInterval(interval);
First, it isn't a "jQuery setTimeout". setTimeout is part of the native API, not jQuery's API.
Second, I assume you want 5 seconds. Currently you're doing 5 milliseconds.
$('.text').bind("paste", function(e) {
setTimeout(function() {
doSmth();
}, 5000);
});
The duration of 5 in your code is far too short to be perceptible.
I see that the other answers user setInterval, but from what I've read, you should avoid using setInterval, since you can end up with a stack of not-yet-executed function calls etc.
So what you could do instead is something like this:
var myTimeout;
$('.text').bind("paste", function (e) {
function loopFunction () {
doSmth();
myTimeout = setTimeout(loopFunction, 5000);
}
myTimeout = setTimeout(loopFunction, 5000);
});
Now you have a function that calls itself every five seconds.
According to your feedback,here is the solution:
var interval = setInterval(doSmth, 5000);
$('.text').blur(function() {
doSmth();
});
$('.text').bind("paste", function(e) {
setTimeout(function() {
doSmth();
}, 0);
});
Thanks for you amazing support.

Calling a function every 60 seconds

Using setTimeout() it is possible to launch a function at a specified time:
setTimeout(function, 60000);
But what if I would like to launch the function multiple times? Every time a time interval passes, I would like to execute the function (every 60 seconds, let's say).
If you don't care if the code within the timer may take longer than your interval, use setInterval():
setInterval(function, delay)
That fires the function passed in as first parameter over and over.
A better approach is, to use setTimeout along with a self-executing anonymous function:
(function(){
// do some stuff
setTimeout(arguments.callee, 60000);
})();
that guarantees, that the next call is not made before your code was executed. I used arguments.callee in this example as function reference. It's a better way to give the function a name and call that within setTimeout because arguments.callee is deprecated in ecmascript 5.
use the
setInterval(function, 60000);
EDIT : (In case if you want to stop the clock after it is started)
Script section
<script>
var int=self.setInterval(function, 60000);
</script>
and HTML Code
<!-- Stop Button -->
Stop
A better use of jAndy's answer to implement a polling function that polls every interval seconds, and ends after timeout seconds.
function pollFunc(fn, timeout, interval) {
var startTime = (new Date()).getTime();
interval = interval || 1000;
(function p() {
fn();
if (((new Date).getTime() - startTime ) <= timeout) {
setTimeout(p, interval);
}
})();
}
pollFunc(sendHeartBeat, 60000, 1000);
UPDATE
As per the comment, updating it for the ability of the passed function to stop the polling:
function pollFunc(fn, timeout, interval) {
var startTime = (new Date()).getTime();
interval = interval || 1000,
canPoll = true;
(function p() {
canPoll = ((new Date).getTime() - startTime ) <= timeout;
if (!fn() && canPoll) { // ensures the function exucutes
setTimeout(p, interval);
}
})();
}
pollFunc(sendHeartBeat, 60000, 1000);
function sendHeartBeat(params) {
...
...
if (receivedData) {
// no need to execute further
return true; // or false, change the IIFE inside condition accordingly.
}
}
In jQuery you can do like this.
function random_no(){
var ran=Math.random();
jQuery('#random_no_container').html(ran);
}
window.setInterval(function(){
/// call your function here
random_no();
}, 6000); // Change Interval here to test. For eg: 5000 for 5 sec
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="random_no_container">
Hello. Here you can see random numbers after every 6 sec
</div>
setInterval(fn,time)
is the method you're after.
You can simply call setTimeout at the end of the function. This will add it again to the event queue. You can use any kind of logic to vary the delay values. For example,
function multiStep() {
// do some work here
blah_blah_whatever();
var newtime = 60000;
if (!requestStop) {
setTimeout(multiStep, newtime);
}
}
Use window.setInterval(func, time).
A good example where to subscribe a setInterval(), and use a clearInterval() to stop the forever loop:
function myTimer() {
}
var timer = setInterval(myTimer, 5000);
call this line to stop the loop:
clearInterval(timer);
Call a Javascript function every 2 second continuously for 10 second.
var intervalPromise;
$scope.startTimer = function(fn, delay, timeoutTime) {
intervalPromise = $interval(function() {
fn();
var currentTime = new Date().getTime() - $scope.startTime;
if (currentTime > timeoutTime){
$interval.cancel(intervalPromise);
}
}, delay);
};
$scope.startTimer(hello, 2000, 10000);
hello(){
console.log("hello");
}
function random(number) {
return Math.floor(Math.random() * (number+1));
}
setInterval(() => {
const rndCol = 'rgb(' + random(255) + ',' + random(255) + ',' + random(255) + ')';//rgb value (0-255,0-255,0-255)
document.body.style.backgroundColor = rndCol;
}, 1000);
<script src="test.js"></script>
it changes background color in every 1 second (written as 1000 in JS)
// example:
// checkEach(1000, () => {
// if(!canIDoWorkNow()) {
// return true // try again after 1 second
// }
//
// doWork()
// })
export function checkEach(milliseconds, fn) {
const timer = setInterval(
() => {
try {
const retry = fn()
if (retry !== true) {
clearInterval(timer)
}
} catch (e) {
clearInterval(timer)
throw e
}
},
milliseconds
)
}
here we console natural number 0 to ......n (next number print in console every 60 sec.) , using setInterval()
var count = 0;
function abc(){
count ++;
console.log(count);
}
setInterval(abc,60*1000);
I see that it wasn't mentioned here if you need to pass a parameter to your function on repeat setTimeout(myFunc(myVal), 60000); will cause an error of calling function before the previous call is completed.
Therefore, you can pass the parameter like
setTimeout(function () {
myFunc(myVal);
}, 60000)
For more detailed information you can see the JavaScript garden.
Hope it helps somebody.
I favour calling a function that contains a loop function that calls a setTimeout on itself at regular intervals.
function timer(interval = 1000) {
function loop(count = 1) {
console.log(count);
setTimeout(loop, interval, ++count);
}
loop();
}
timer();
There are 2 ways to call-
setInterval(function (){ functionName();}, 60000);
setInterval(functionName, 60000);
above function will call on every 60 seconds.

Categories

Resources