Related
I have a string, let's say Hello world and I need to replace the char at index 3. How can I replace a char by specifying a index?
var str = "hello world";
I need something like
str.replaceAt(0,"h");
In JavaScript, strings are immutable, which means the best you can do is to create a new string with the changed content and assign the variable to point to it.
You'll need to define the replaceAt() function yourself:
String.prototype.replaceAt = function(index, replacement) {
return this.substring(0, index) + replacement + this.substring(index + replacement.length);
}
And use it like this:
var hello = "Hello World";
alert(hello.replaceAt(2, "!!")); // He!!o World
There is no replaceAt function in JavaScript. You can use the following code to replace any character in any string at specified position:
function rep() {
var str = 'Hello World';
str = setCharAt(str,4,'a');
alert(str);
}
function setCharAt(str,index,chr) {
if(index > str.length-1) return str;
return str.substring(0,index) + chr + str.substring(index+1);
}
<button onclick="rep();">click</button>
You can't. Take the characters before and after the position and concat into a new string:
var s = "Hello world";
var index = 3;
s = s.substring(0, index) + 'x' + s.substring(index + 1);
str = str.split('');
str[3] = 'h';
str = str.join('');
There are lot of answers here, and all of them are based on two methods:
METHOD1: split the string using two substrings and stuff the character between them
METHOD2: convert the string to character array, replace one array member and join it
Personally, I would use these two methods in different cases. Let me explain.
#FabioPhms: Your method was the one I initially used and I was afraid that it is bad on string with lots of characters. However, question is what's a lot of characters? I tested it on 10 "lorem ipsum" paragraphs and it took a few milliseconds. Then I tested it on 10 times larger string - there was really no big difference. Hm.
#vsync, #Cory Mawhorter: Your comments are unambiguous; however, again, what is a large string? I agree that for 32...100kb performance should better and one should use substring-variant for this one operation of character replacement.
But what will happen if I have to make quite a few replacements?
I needed to perform my own tests to prove what is faster in that case. Let's say we have an algorithm that will manipulate a relatively short string that consists of 1000 characters. We expect that in average each character in that string will be replaced ~100 times. So, the code to test something like this is:
var str = "... {A LARGE STRING HERE} ...";
for(var i=0; i<100000; i++)
{
var n = '' + Math.floor(Math.random() * 10);
var p = Math.floor(Math.random() * 1000);
// replace character *n* on position *p*
}
I created a fiddle for this, and it's here.
There are two tests, TEST1 (substring) and TEST2 (array conversion).
Results:
TEST1: 195ms
TEST2: 6ms
It seems that array conversion beats substring by 2 orders of magnitude! So - what the hell happened here???
What actually happens is that all operations in TEST2 are done on array itself, using assignment expression like strarr2[p] = n. Assignment is really fast compared to substring on a large string, and its clear that it's going to win.
So, it's all about choosing the right tool for the job. Again.
Work with vectors is usually most effective to contact String.
I suggest the following function:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
Run this snippet:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
var str = "hello world";
str = str.replaceAt(3, "#");
document.write(str);
In Javascript strings are immutable so you have to do something like
var x = "Hello world"
x = x.substring(0, i) + 'h' + x.substring(i+1);
To replace the character in x at i with 'h'
function dothis() {
var x = document.getElementById("x").value;
var index = document.getElementById("index").value;
var text = document.getElementById("text").value;
var length = document.getElementById("length").value;
var arr = x.split("");
arr.splice(index, length, text);
var result = arr.join("");
document.getElementById('output').innerHTML = result;
console.log(result);
}
dothis();
<input id="x" type="text" value="White Dog" placeholder="Enter Text" />
<input id="index" type="number" min="0"value="6" style="width:50px" placeholder="index" />
<input id="length" type="number" min="0"value="1" style="width:50px" placeholder="length" />
<input id="text" type="text" value="F" placeholder="New character" />
<br>
<button id="submit" onclick="dothis()">Run</button>
<p id="output"></p>
This method is good for small length strings but may be slow for larger text.
var x = "White Dog";
var arr = x.split(""); // ["W", "h", "i", "t", "e", " ", "D", "o", "g"]
arr.splice(6, 1, 'F');
/*
Here 6 is starting index and 1 is no. of array elements to remove and
final argument 'F' is the new character to be inserted.
*/
var result = arr.join(""); // "White Fog"
One-liner using String.replace with callback (no emoji support):
// 0 - index to replace, 'f' - replacement string
'dog'.replace(/./g, (c, i) => i == 0? 'f': c)
// "fog"
Explained:
//String.replace will call the callback on each pattern match
//in this case - each character
'dog'.replace(/./g, function (character, index) {
if (index == 0) //we want to replace the first character
return 'f'
return character //leaving other characters the same
})
Generalizing Afanasii Kurakin's answer, we have:
function replaceAt(str, index, ch) {
return str.replace(/./g, (c, i) => i == index ? ch : c);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
Let's expand and explain both the regular expression and the replacer function:
function replaceAt(str, index, newChar) {
function replacer(origChar, strIndex) {
if (strIndex === index)
return newChar;
else
return origChar;
}
return str.replace(/./g, replacer);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
The regular expression . matches exactly one character. The g makes it match every character in a for loop. The replacer function is called given both the original character and the index of where that character is in the string. We make a simple if statement to determine if we're going to return either origChar or newChar.
var str = "hello world";
console.log(str);
var arr = [...str];
arr[0] = "H";
str = arr.join("");
console.log(str);
This works similar to Array.splice:
String.prototype.splice = function (i, j, str) {
return this.substr(0, i) + str + this.substr(j, this.length);
};
You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
this is easily achievable with RegExp!
const str = 'Hello RegEx!';
const index = 11;
const replaceWith = 'p';
//'Hello RegEx!'.replace(/^(.{11})(.)/, `$1p`);
str.replace(new RegExp(`^(.{${ index }})(.)`), `$1${ replaceWith }`);
//< "Hello RegExp"
Using the spread syntax, you may convert the string to an array, assign the character at the given position, and convert back to a string:
const str = "hello world";
function replaceAt(s, i, c) {
const arr = [...s]; // Convert string to array
arr[i] = c; // Set char c at pos i
return arr.join(''); // Back to string
}
// prints "hallo world"
console.log(replaceAt(str, 1, 'a'));
You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
Check out this function for printing steps
steps(3)
// '# '
// '## '
// '###'
function steps(n, i = 0, arr = Array(n).fill(' ').join('')) {
if (i === n) {
return;
}
str = arr.split('');
str[i] = '#';
str = str.join('');
console.log(str);
steps(n, (i = i + 1), str);
}
#CemKalyoncu: Thanks for the great answer!
I also adapted it slightly to make it more like the Array.splice method (and took #Ates' note into consideration):
spliceString=function(string, index, numToDelete, char) {
return string.substr(0, index) + char + string.substr(index+numToDelete);
}
var myString="hello world!";
spliceString(myString,myString.lastIndexOf('l'),2,'mhole'); // "hello wormhole!"
If you want to replace characters in string, you should create mutable strings. These are essentially character arrays. You could create a factory:
function MutableString(str) {
var result = str.split("");
result.toString = function() {
return this.join("");
}
return result;
}
Then you can access the characters and the whole array converts to string when used as string:
var x = MutableString("Hello");
x[0] = "B"; // yes, we can alter the character
x.push("!"); // good performance: no new string is created
var y = "Hi, "+x; // converted to string: "Hi, Bello!"
You can extend the string type to include the inset method:
String.prototype.append = function (index,value) {
return this.slice(0,index) + value + this.slice(index);
};
var s = "New string";
alert(s.append(4,"complete "));
Then you can call the function:
You can concatenate using sub-string function at first select text before targeted index and after targeted index then concatenate with your potential char or string. This one is better
const myString = "Hello world";
const index = 3;
const stringBeforeIndex = myString.substring(0, index);
const stringAfterIndex = myString.substring(index + 1);
const replaceChar = "X";
myString = stringBeforeIndex + replaceChar + stringAfterIndex;
console.log("New string - ", myString)
or
const myString = "Hello world";
let index = 3;
myString = myString.substring(0, index) + "X" + myString.substring(index + 1);
I did a function that does something similar to what you ask, it checks if a character in string is in an array of not allowed characters if it is it replaces it with ''
var validate = function(value){
var notAllowed = [";","_",">","<","'","%","$","&","/","|",":","=","*"];
for(var i=0; i<value.length; i++){
if(notAllowed.indexOf(value.charAt(i)) > -1){
value = value.replace(value.charAt(i), "");
value = validate(value);
}
}
return value;
}
Here is a version I came up with if you want to style words or individual characters at their index in react/javascript.
replaceAt( yourArrayOfIndexes, yourString/orArrayOfStrings )
Working example: https://codesandbox.io/s/ov7zxp9mjq
function replaceAt(indexArray, [...string]) {
const replaceValue = i => string[i] = <b>{string[i]}</b>;
indexArray.forEach(replaceValue);
return string;
}
And here is another alternate method
function replaceAt(indexArray, [...string]) {
const startTag = '<b>';
const endTag = '</b>';
const tagLetter = i => string.splice(i, 1, startTag + string[i] + endTag);
indexArray.forEach(tagLetter);
return string.join('');
}
And another...
function replaceAt(indexArray, [...string]) {
for (let i = 0; i < indexArray.length; i++) {
string = Object.assign(string, {
[indexArray[i]]: <b>{string[indexArray[i]]}</b>
});
}
return string;
}
Here is my solution using the ternary and map operator. More readable, maintainable end easier to understand if you ask me.
It is more into es6 and best practices.
function replaceAt() {
const replaceAt = document.getElementById('replaceAt').value;
const str = 'ThisIsATestStringToReplaceCharAtSomePosition';
const newStr = Array.from(str).map((character, charIndex) => charIndex === (replaceAt - 1) ? '' : character).join('');
console.log(`New string: ${newStr}`);
}
<input type="number" id="replaceAt" min="1" max="44" oninput="replaceAt()"/>
My safe approach with negative indexes
/**
* #param {string} str
* #param {number} index
* #param {string} replacement
* #returns {string}
*/
static replaceAt (str, index, replacement)
{
if (index < 0) index = str.length + index
if (index < 0 || index >= str.length) throw new Error(`Index (${index}) out of bounds "${str}"`)
return str.substring(0, index) + replacement + str.substring(index + 1)
}
Use it like that:
replaceAt('my string', -1, 'G') // 'my strinG'
replaceAt('my string', 2, 'yy') // 'myyystring'
replaceAt('my string', 22, 'yy') // Uncaught Error: Index (22) out of bounds "my string"
Lets say you want to replace Kth index (0-based index) with 'Z'.
You could use Regex to do this.
var re = var re = new RegExp("((.){" + K + "})((.){1})")
str.replace(re, "$1A$`");
You can use the following function to replace Character or String at a particular position of a String. To replace all the following match cases use String.prototype.replaceAllMatches() function.
String.prototype.replaceMatch = function(matchkey, replaceStr, matchIndex) {
var retStr = this, repeatedIndex = 0;
for (var x = 0; (matchkey != null) && (retStr.indexOf(matchkey) > -1); x++) {
if (repeatedIndex == 0 && x == 0) {
repeatedIndex = retStr.indexOf(matchkey);
} else { // matchIndex > 0
repeatedIndex = retStr.indexOf(matchkey, repeatedIndex + 1);
}
if (x == matchIndex) {
retStr = retStr.substring(0, repeatedIndex) + replaceStr + retStr.substring(repeatedIndex + (matchkey.length));
matchkey = null; // To break the loop.
}
}
return retStr;
};
Test:
var str = "yash yas $dfdas.**";
console.log('Index Matched replace : ', str.replaceMatch('as', '*', 2) );
console.log('Index Matched replace : ', str.replaceMatch('y', '~', 1) );
Output:
Index Matched replace : yash yas $dfd*.**
Index Matched replace : yash ~as $dfdas.**
I se this to make a string proper case, that is, the first letter is Upper Case and all the rest are lower case:
function toProperCase(someString){
return someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length));
};
This first thing done is to ensure ALL the string is lower case - someString.toLowerCase()
then it converts the very first character to upper case -someString.charAt(0).toUpperCase()
then it takes a substring of the remaining string less the first character -someString.toLowerCase().substring(1,someString.length))
then it concatenates the two and returns the new string -someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length))
New parameters could be added for the replacement character index and the replacement character, then two substrings formed and the indexed character replaced then concatenated in much the same way.
The solution does not work for negative index so I add a patch to it.
String.prototype.replaceAt=function(index, character) {
if(index>-1) return this.substr(0, index) + character + this.substr(index+character.length);
else return this.substr(0, this.length+index) + character + this.substr(index+character.length);
}
"hello world".replace(/(.{3})./, "$1h")
// 'helho world'
The methods on here are complicated.
I would do it this way:
var myString = "this is my string";
myString = myString.replace(myString.charAt(number goes here), "insert replacement here");
This is as simple as it gets.
I have a string, let's say Hello world and I need to replace the char at index 3. How can I replace a char by specifying a index?
var str = "hello world";
I need something like
str.replaceAt(0,"h");
In JavaScript, strings are immutable, which means the best you can do is to create a new string with the changed content and assign the variable to point to it.
You'll need to define the replaceAt() function yourself:
String.prototype.replaceAt = function(index, replacement) {
return this.substring(0, index) + replacement + this.substring(index + replacement.length);
}
And use it like this:
var hello = "Hello World";
alert(hello.replaceAt(2, "!!")); // He!!o World
There is no replaceAt function in JavaScript. You can use the following code to replace any character in any string at specified position:
function rep() {
var str = 'Hello World';
str = setCharAt(str,4,'a');
alert(str);
}
function setCharAt(str,index,chr) {
if(index > str.length-1) return str;
return str.substring(0,index) + chr + str.substring(index+1);
}
<button onclick="rep();">click</button>
You can't. Take the characters before and after the position and concat into a new string:
var s = "Hello world";
var index = 3;
s = s.substring(0, index) + 'x' + s.substring(index + 1);
str = str.split('');
str[3] = 'h';
str = str.join('');
There are lot of answers here, and all of them are based on two methods:
METHOD1: split the string using two substrings and stuff the character between them
METHOD2: convert the string to character array, replace one array member and join it
Personally, I would use these two methods in different cases. Let me explain.
#FabioPhms: Your method was the one I initially used and I was afraid that it is bad on string with lots of characters. However, question is what's a lot of characters? I tested it on 10 "lorem ipsum" paragraphs and it took a few milliseconds. Then I tested it on 10 times larger string - there was really no big difference. Hm.
#vsync, #Cory Mawhorter: Your comments are unambiguous; however, again, what is a large string? I agree that for 32...100kb performance should better and one should use substring-variant for this one operation of character replacement.
But what will happen if I have to make quite a few replacements?
I needed to perform my own tests to prove what is faster in that case. Let's say we have an algorithm that will manipulate a relatively short string that consists of 1000 characters. We expect that in average each character in that string will be replaced ~100 times. So, the code to test something like this is:
var str = "... {A LARGE STRING HERE} ...";
for(var i=0; i<100000; i++)
{
var n = '' + Math.floor(Math.random() * 10);
var p = Math.floor(Math.random() * 1000);
// replace character *n* on position *p*
}
I created a fiddle for this, and it's here.
There are two tests, TEST1 (substring) and TEST2 (array conversion).
Results:
TEST1: 195ms
TEST2: 6ms
It seems that array conversion beats substring by 2 orders of magnitude! So - what the hell happened here???
What actually happens is that all operations in TEST2 are done on array itself, using assignment expression like strarr2[p] = n. Assignment is really fast compared to substring on a large string, and its clear that it's going to win.
So, it's all about choosing the right tool for the job. Again.
Work with vectors is usually most effective to contact String.
I suggest the following function:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
Run this snippet:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
var str = "hello world";
str = str.replaceAt(3, "#");
document.write(str);
In Javascript strings are immutable so you have to do something like
var x = "Hello world"
x = x.substring(0, i) + 'h' + x.substring(i+1);
To replace the character in x at i with 'h'
function dothis() {
var x = document.getElementById("x").value;
var index = document.getElementById("index").value;
var text = document.getElementById("text").value;
var length = document.getElementById("length").value;
var arr = x.split("");
arr.splice(index, length, text);
var result = arr.join("");
document.getElementById('output').innerHTML = result;
console.log(result);
}
dothis();
<input id="x" type="text" value="White Dog" placeholder="Enter Text" />
<input id="index" type="number" min="0"value="6" style="width:50px" placeholder="index" />
<input id="length" type="number" min="0"value="1" style="width:50px" placeholder="length" />
<input id="text" type="text" value="F" placeholder="New character" />
<br>
<button id="submit" onclick="dothis()">Run</button>
<p id="output"></p>
This method is good for small length strings but may be slow for larger text.
var x = "White Dog";
var arr = x.split(""); // ["W", "h", "i", "t", "e", " ", "D", "o", "g"]
arr.splice(6, 1, 'F');
/*
Here 6 is starting index and 1 is no. of array elements to remove and
final argument 'F' is the new character to be inserted.
*/
var result = arr.join(""); // "White Fog"
One-liner using String.replace with callback (no emoji support):
// 0 - index to replace, 'f' - replacement string
'dog'.replace(/./g, (c, i) => i == 0? 'f': c)
// "fog"
Explained:
//String.replace will call the callback on each pattern match
//in this case - each character
'dog'.replace(/./g, function (character, index) {
if (index == 0) //we want to replace the first character
return 'f'
return character //leaving other characters the same
})
Generalizing Afanasii Kurakin's answer, we have:
function replaceAt(str, index, ch) {
return str.replace(/./g, (c, i) => i == index ? ch : c);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
Let's expand and explain both the regular expression and the replacer function:
function replaceAt(str, index, newChar) {
function replacer(origChar, strIndex) {
if (strIndex === index)
return newChar;
else
return origChar;
}
return str.replace(/./g, replacer);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
The regular expression . matches exactly one character. The g makes it match every character in a for loop. The replacer function is called given both the original character and the index of where that character is in the string. We make a simple if statement to determine if we're going to return either origChar or newChar.
var str = "hello world";
console.log(str);
var arr = [...str];
arr[0] = "H";
str = arr.join("");
console.log(str);
This works similar to Array.splice:
String.prototype.splice = function (i, j, str) {
return this.substr(0, i) + str + this.substr(j, this.length);
};
You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
this is easily achievable with RegExp!
const str = 'Hello RegEx!';
const index = 11;
const replaceWith = 'p';
//'Hello RegEx!'.replace(/^(.{11})(.)/, `$1p`);
str.replace(new RegExp(`^(.{${ index }})(.)`), `$1${ replaceWith }`);
//< "Hello RegExp"
Using the spread syntax, you may convert the string to an array, assign the character at the given position, and convert back to a string:
const str = "hello world";
function replaceAt(s, i, c) {
const arr = [...s]; // Convert string to array
arr[i] = c; // Set char c at pos i
return arr.join(''); // Back to string
}
// prints "hallo world"
console.log(replaceAt(str, 1, 'a'));
You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
Check out this function for printing steps
steps(3)
// '# '
// '## '
// '###'
function steps(n, i = 0, arr = Array(n).fill(' ').join('')) {
if (i === n) {
return;
}
str = arr.split('');
str[i] = '#';
str = str.join('');
console.log(str);
steps(n, (i = i + 1), str);
}
#CemKalyoncu: Thanks for the great answer!
I also adapted it slightly to make it more like the Array.splice method (and took #Ates' note into consideration):
spliceString=function(string, index, numToDelete, char) {
return string.substr(0, index) + char + string.substr(index+numToDelete);
}
var myString="hello world!";
spliceString(myString,myString.lastIndexOf('l'),2,'mhole'); // "hello wormhole!"
If you want to replace characters in string, you should create mutable strings. These are essentially character arrays. You could create a factory:
function MutableString(str) {
var result = str.split("");
result.toString = function() {
return this.join("");
}
return result;
}
Then you can access the characters and the whole array converts to string when used as string:
var x = MutableString("Hello");
x[0] = "B"; // yes, we can alter the character
x.push("!"); // good performance: no new string is created
var y = "Hi, "+x; // converted to string: "Hi, Bello!"
You can extend the string type to include the inset method:
String.prototype.append = function (index,value) {
return this.slice(0,index) + value + this.slice(index);
};
var s = "New string";
alert(s.append(4,"complete "));
Then you can call the function:
You can concatenate using sub-string function at first select text before targeted index and after targeted index then concatenate with your potential char or string. This one is better
const myString = "Hello world";
const index = 3;
const stringBeforeIndex = myString.substring(0, index);
const stringAfterIndex = myString.substring(index + 1);
const replaceChar = "X";
myString = stringBeforeIndex + replaceChar + stringAfterIndex;
console.log("New string - ", myString)
or
const myString = "Hello world";
let index = 3;
myString = myString.substring(0, index) + "X" + myString.substring(index + 1);
I did a function that does something similar to what you ask, it checks if a character in string is in an array of not allowed characters if it is it replaces it with ''
var validate = function(value){
var notAllowed = [";","_",">","<","'","%","$","&","/","|",":","=","*"];
for(var i=0; i<value.length; i++){
if(notAllowed.indexOf(value.charAt(i)) > -1){
value = value.replace(value.charAt(i), "");
value = validate(value);
}
}
return value;
}
Here is a version I came up with if you want to style words or individual characters at their index in react/javascript.
replaceAt( yourArrayOfIndexes, yourString/orArrayOfStrings )
Working example: https://codesandbox.io/s/ov7zxp9mjq
function replaceAt(indexArray, [...string]) {
const replaceValue = i => string[i] = <b>{string[i]}</b>;
indexArray.forEach(replaceValue);
return string;
}
And here is another alternate method
function replaceAt(indexArray, [...string]) {
const startTag = '<b>';
const endTag = '</b>';
const tagLetter = i => string.splice(i, 1, startTag + string[i] + endTag);
indexArray.forEach(tagLetter);
return string.join('');
}
And another...
function replaceAt(indexArray, [...string]) {
for (let i = 0; i < indexArray.length; i++) {
string = Object.assign(string, {
[indexArray[i]]: <b>{string[indexArray[i]]}</b>
});
}
return string;
}
Here is my solution using the ternary and map operator. More readable, maintainable end easier to understand if you ask me.
It is more into es6 and best practices.
function replaceAt() {
const replaceAt = document.getElementById('replaceAt').value;
const str = 'ThisIsATestStringToReplaceCharAtSomePosition';
const newStr = Array.from(str).map((character, charIndex) => charIndex === (replaceAt - 1) ? '' : character).join('');
console.log(`New string: ${newStr}`);
}
<input type="number" id="replaceAt" min="1" max="44" oninput="replaceAt()"/>
My safe approach with negative indexes
/**
* #param {string} str
* #param {number} index
* #param {string} replacement
* #returns {string}
*/
static replaceAt (str, index, replacement)
{
if (index < 0) index = str.length + index
if (index < 0 || index >= str.length) throw new Error(`Index (${index}) out of bounds "${str}"`)
return str.substring(0, index) + replacement + str.substring(index + 1)
}
Use it like that:
replaceAt('my string', -1, 'G') // 'my strinG'
replaceAt('my string', 2, 'yy') // 'myyystring'
replaceAt('my string', 22, 'yy') // Uncaught Error: Index (22) out of bounds "my string"
Lets say you want to replace Kth index (0-based index) with 'Z'.
You could use Regex to do this.
var re = var re = new RegExp("((.){" + K + "})((.){1})")
str.replace(re, "$1A$`");
You can use the following function to replace Character or String at a particular position of a String. To replace all the following match cases use String.prototype.replaceAllMatches() function.
String.prototype.replaceMatch = function(matchkey, replaceStr, matchIndex) {
var retStr = this, repeatedIndex = 0;
for (var x = 0; (matchkey != null) && (retStr.indexOf(matchkey) > -1); x++) {
if (repeatedIndex == 0 && x == 0) {
repeatedIndex = retStr.indexOf(matchkey);
} else { // matchIndex > 0
repeatedIndex = retStr.indexOf(matchkey, repeatedIndex + 1);
}
if (x == matchIndex) {
retStr = retStr.substring(0, repeatedIndex) + replaceStr + retStr.substring(repeatedIndex + (matchkey.length));
matchkey = null; // To break the loop.
}
}
return retStr;
};
Test:
var str = "yash yas $dfdas.**";
console.log('Index Matched replace : ', str.replaceMatch('as', '*', 2) );
console.log('Index Matched replace : ', str.replaceMatch('y', '~', 1) );
Output:
Index Matched replace : yash yas $dfd*.**
Index Matched replace : yash ~as $dfdas.**
I se this to make a string proper case, that is, the first letter is Upper Case and all the rest are lower case:
function toProperCase(someString){
return someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length));
};
This first thing done is to ensure ALL the string is lower case - someString.toLowerCase()
then it converts the very first character to upper case -someString.charAt(0).toUpperCase()
then it takes a substring of the remaining string less the first character -someString.toLowerCase().substring(1,someString.length))
then it concatenates the two and returns the new string -someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length))
New parameters could be added for the replacement character index and the replacement character, then two substrings formed and the indexed character replaced then concatenated in much the same way.
The solution does not work for negative index so I add a patch to it.
String.prototype.replaceAt=function(index, character) {
if(index>-1) return this.substr(0, index) + character + this.substr(index+character.length);
else return this.substr(0, this.length+index) + character + this.substr(index+character.length);
}
"hello world".replace(/(.{3})./, "$1h")
// 'helho world'
The methods on here are complicated.
I would do it this way:
var myString = "this is my string";
myString = myString.replace(myString.charAt(number goes here), "insert replacement here");
This is as simple as it gets.
I have a string, let's say Hello world and I need to replace the char at index 3. How can I replace a char by specifying a index?
var str = "hello world";
I need something like
str.replaceAt(0,"h");
In JavaScript, strings are immutable, which means the best you can do is to create a new string with the changed content and assign the variable to point to it.
You'll need to define the replaceAt() function yourself:
String.prototype.replaceAt = function(index, replacement) {
return this.substring(0, index) + replacement + this.substring(index + replacement.length);
}
And use it like this:
var hello = "Hello World";
alert(hello.replaceAt(2, "!!")); // He!!o World
There is no replaceAt function in JavaScript. You can use the following code to replace any character in any string at specified position:
function rep() {
var str = 'Hello World';
str = setCharAt(str,4,'a');
alert(str);
}
function setCharAt(str,index,chr) {
if(index > str.length-1) return str;
return str.substring(0,index) + chr + str.substring(index+1);
}
<button onclick="rep();">click</button>
You can't. Take the characters before and after the position and concat into a new string:
var s = "Hello world";
var index = 3;
s = s.substring(0, index) + 'x' + s.substring(index + 1);
str = str.split('');
str[3] = 'h';
str = str.join('');
There are lot of answers here, and all of them are based on two methods:
METHOD1: split the string using two substrings and stuff the character between them
METHOD2: convert the string to character array, replace one array member and join it
Personally, I would use these two methods in different cases. Let me explain.
#FabioPhms: Your method was the one I initially used and I was afraid that it is bad on string with lots of characters. However, question is what's a lot of characters? I tested it on 10 "lorem ipsum" paragraphs and it took a few milliseconds. Then I tested it on 10 times larger string - there was really no big difference. Hm.
#vsync, #Cory Mawhorter: Your comments are unambiguous; however, again, what is a large string? I agree that for 32...100kb performance should better and one should use substring-variant for this one operation of character replacement.
But what will happen if I have to make quite a few replacements?
I needed to perform my own tests to prove what is faster in that case. Let's say we have an algorithm that will manipulate a relatively short string that consists of 1000 characters. We expect that in average each character in that string will be replaced ~100 times. So, the code to test something like this is:
var str = "... {A LARGE STRING HERE} ...";
for(var i=0; i<100000; i++)
{
var n = '' + Math.floor(Math.random() * 10);
var p = Math.floor(Math.random() * 1000);
// replace character *n* on position *p*
}
I created a fiddle for this, and it's here.
There are two tests, TEST1 (substring) and TEST2 (array conversion).
Results:
TEST1: 195ms
TEST2: 6ms
It seems that array conversion beats substring by 2 orders of magnitude! So - what the hell happened here???
What actually happens is that all operations in TEST2 are done on array itself, using assignment expression like strarr2[p] = n. Assignment is really fast compared to substring on a large string, and its clear that it's going to win.
So, it's all about choosing the right tool for the job. Again.
Work with vectors is usually most effective to contact String.
I suggest the following function:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
Run this snippet:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
var str = "hello world";
str = str.replaceAt(3, "#");
document.write(str);
In Javascript strings are immutable so you have to do something like
var x = "Hello world"
x = x.substring(0, i) + 'h' + x.substring(i+1);
To replace the character in x at i with 'h'
function dothis() {
var x = document.getElementById("x").value;
var index = document.getElementById("index").value;
var text = document.getElementById("text").value;
var length = document.getElementById("length").value;
var arr = x.split("");
arr.splice(index, length, text);
var result = arr.join("");
document.getElementById('output').innerHTML = result;
console.log(result);
}
dothis();
<input id="x" type="text" value="White Dog" placeholder="Enter Text" />
<input id="index" type="number" min="0"value="6" style="width:50px" placeholder="index" />
<input id="length" type="number" min="0"value="1" style="width:50px" placeholder="length" />
<input id="text" type="text" value="F" placeholder="New character" />
<br>
<button id="submit" onclick="dothis()">Run</button>
<p id="output"></p>
This method is good for small length strings but may be slow for larger text.
var x = "White Dog";
var arr = x.split(""); // ["W", "h", "i", "t", "e", " ", "D", "o", "g"]
arr.splice(6, 1, 'F');
/*
Here 6 is starting index and 1 is no. of array elements to remove and
final argument 'F' is the new character to be inserted.
*/
var result = arr.join(""); // "White Fog"
One-liner using String.replace with callback (no emoji support):
// 0 - index to replace, 'f' - replacement string
'dog'.replace(/./g, (c, i) => i == 0? 'f': c)
// "fog"
Explained:
//String.replace will call the callback on each pattern match
//in this case - each character
'dog'.replace(/./g, function (character, index) {
if (index == 0) //we want to replace the first character
return 'f'
return character //leaving other characters the same
})
Generalizing Afanasii Kurakin's answer, we have:
function replaceAt(str, index, ch) {
return str.replace(/./g, (c, i) => i == index ? ch : c);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
Let's expand and explain both the regular expression and the replacer function:
function replaceAt(str, index, newChar) {
function replacer(origChar, strIndex) {
if (strIndex === index)
return newChar;
else
return origChar;
}
return str.replace(/./g, replacer);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
The regular expression . matches exactly one character. The g makes it match every character in a for loop. The replacer function is called given both the original character and the index of where that character is in the string. We make a simple if statement to determine if we're going to return either origChar or newChar.
var str = "hello world";
console.log(str);
var arr = [...str];
arr[0] = "H";
str = arr.join("");
console.log(str);
This works similar to Array.splice:
String.prototype.splice = function (i, j, str) {
return this.substr(0, i) + str + this.substr(j, this.length);
};
You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
this is easily achievable with RegExp!
const str = 'Hello RegEx!';
const index = 11;
const replaceWith = 'p';
//'Hello RegEx!'.replace(/^(.{11})(.)/, `$1p`);
str.replace(new RegExp(`^(.{${ index }})(.)`), `$1${ replaceWith }`);
//< "Hello RegExp"
Using the spread syntax, you may convert the string to an array, assign the character at the given position, and convert back to a string:
const str = "hello world";
function replaceAt(s, i, c) {
const arr = [...s]; // Convert string to array
arr[i] = c; // Set char c at pos i
return arr.join(''); // Back to string
}
// prints "hallo world"
console.log(replaceAt(str, 1, 'a'));
You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
Check out this function for printing steps
steps(3)
// '# '
// '## '
// '###'
function steps(n, i = 0, arr = Array(n).fill(' ').join('')) {
if (i === n) {
return;
}
str = arr.split('');
str[i] = '#';
str = str.join('');
console.log(str);
steps(n, (i = i + 1), str);
}
#CemKalyoncu: Thanks for the great answer!
I also adapted it slightly to make it more like the Array.splice method (and took #Ates' note into consideration):
spliceString=function(string, index, numToDelete, char) {
return string.substr(0, index) + char + string.substr(index+numToDelete);
}
var myString="hello world!";
spliceString(myString,myString.lastIndexOf('l'),2,'mhole'); // "hello wormhole!"
If you want to replace characters in string, you should create mutable strings. These are essentially character arrays. You could create a factory:
function MutableString(str) {
var result = str.split("");
result.toString = function() {
return this.join("");
}
return result;
}
Then you can access the characters and the whole array converts to string when used as string:
var x = MutableString("Hello");
x[0] = "B"; // yes, we can alter the character
x.push("!"); // good performance: no new string is created
var y = "Hi, "+x; // converted to string: "Hi, Bello!"
You can extend the string type to include the inset method:
String.prototype.append = function (index,value) {
return this.slice(0,index) + value + this.slice(index);
};
var s = "New string";
alert(s.append(4,"complete "));
Then you can call the function:
You can concatenate using sub-string function at first select text before targeted index and after targeted index then concatenate with your potential char or string. This one is better
const myString = "Hello world";
const index = 3;
const stringBeforeIndex = myString.substring(0, index);
const stringAfterIndex = myString.substring(index + 1);
const replaceChar = "X";
myString = stringBeforeIndex + replaceChar + stringAfterIndex;
console.log("New string - ", myString)
or
const myString = "Hello world";
let index = 3;
myString = myString.substring(0, index) + "X" + myString.substring(index + 1);
I did a function that does something similar to what you ask, it checks if a character in string is in an array of not allowed characters if it is it replaces it with ''
var validate = function(value){
var notAllowed = [";","_",">","<","'","%","$","&","/","|",":","=","*"];
for(var i=0; i<value.length; i++){
if(notAllowed.indexOf(value.charAt(i)) > -1){
value = value.replace(value.charAt(i), "");
value = validate(value);
}
}
return value;
}
Here is a version I came up with if you want to style words or individual characters at their index in react/javascript.
replaceAt( yourArrayOfIndexes, yourString/orArrayOfStrings )
Working example: https://codesandbox.io/s/ov7zxp9mjq
function replaceAt(indexArray, [...string]) {
const replaceValue = i => string[i] = <b>{string[i]}</b>;
indexArray.forEach(replaceValue);
return string;
}
And here is another alternate method
function replaceAt(indexArray, [...string]) {
const startTag = '<b>';
const endTag = '</b>';
const tagLetter = i => string.splice(i, 1, startTag + string[i] + endTag);
indexArray.forEach(tagLetter);
return string.join('');
}
And another...
function replaceAt(indexArray, [...string]) {
for (let i = 0; i < indexArray.length; i++) {
string = Object.assign(string, {
[indexArray[i]]: <b>{string[indexArray[i]]}</b>
});
}
return string;
}
Here is my solution using the ternary and map operator. More readable, maintainable end easier to understand if you ask me.
It is more into es6 and best practices.
function replaceAt() {
const replaceAt = document.getElementById('replaceAt').value;
const str = 'ThisIsATestStringToReplaceCharAtSomePosition';
const newStr = Array.from(str).map((character, charIndex) => charIndex === (replaceAt - 1) ? '' : character).join('');
console.log(`New string: ${newStr}`);
}
<input type="number" id="replaceAt" min="1" max="44" oninput="replaceAt()"/>
My safe approach with negative indexes
/**
* #param {string} str
* #param {number} index
* #param {string} replacement
* #returns {string}
*/
static replaceAt (str, index, replacement)
{
if (index < 0) index = str.length + index
if (index < 0 || index >= str.length) throw new Error(`Index (${index}) out of bounds "${str}"`)
return str.substring(0, index) + replacement + str.substring(index + 1)
}
Use it like that:
replaceAt('my string', -1, 'G') // 'my strinG'
replaceAt('my string', 2, 'yy') // 'myyystring'
replaceAt('my string', 22, 'yy') // Uncaught Error: Index (22) out of bounds "my string"
Lets say you want to replace Kth index (0-based index) with 'Z'.
You could use Regex to do this.
var re = var re = new RegExp("((.){" + K + "})((.){1})")
str.replace(re, "$1A$`");
You can use the following function to replace Character or String at a particular position of a String. To replace all the following match cases use String.prototype.replaceAllMatches() function.
String.prototype.replaceMatch = function(matchkey, replaceStr, matchIndex) {
var retStr = this, repeatedIndex = 0;
for (var x = 0; (matchkey != null) && (retStr.indexOf(matchkey) > -1); x++) {
if (repeatedIndex == 0 && x == 0) {
repeatedIndex = retStr.indexOf(matchkey);
} else { // matchIndex > 0
repeatedIndex = retStr.indexOf(matchkey, repeatedIndex + 1);
}
if (x == matchIndex) {
retStr = retStr.substring(0, repeatedIndex) + replaceStr + retStr.substring(repeatedIndex + (matchkey.length));
matchkey = null; // To break the loop.
}
}
return retStr;
};
Test:
var str = "yash yas $dfdas.**";
console.log('Index Matched replace : ', str.replaceMatch('as', '*', 2) );
console.log('Index Matched replace : ', str.replaceMatch('y', '~', 1) );
Output:
Index Matched replace : yash yas $dfd*.**
Index Matched replace : yash ~as $dfdas.**
I se this to make a string proper case, that is, the first letter is Upper Case and all the rest are lower case:
function toProperCase(someString){
return someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length));
};
This first thing done is to ensure ALL the string is lower case - someString.toLowerCase()
then it converts the very first character to upper case -someString.charAt(0).toUpperCase()
then it takes a substring of the remaining string less the first character -someString.toLowerCase().substring(1,someString.length))
then it concatenates the two and returns the new string -someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length))
New parameters could be added for the replacement character index and the replacement character, then two substrings formed and the indexed character replaced then concatenated in much the same way.
The solution does not work for negative index so I add a patch to it.
String.prototype.replaceAt=function(index, character) {
if(index>-1) return this.substr(0, index) + character + this.substr(index+character.length);
else return this.substr(0, this.length+index) + character + this.substr(index+character.length);
}
"hello world".replace(/(.{3})./, "$1h")
// 'helho world'
The methods on here are complicated.
I would do it this way:
var myString = "this is my string";
myString = myString.replace(myString.charAt(number goes here), "insert replacement here");
This is as simple as it gets.
Okay, here is my code with details of what I have tried to do:
var str = "Hello m|sss sss|mmm ss";
//Now I separate them by "|"
var str1 = str.split("|");
//Now I want to get the first word of every split-ed sting parts:
for (var i = 0; i < codelines.length; i++) {
//What to do here to get the first word of every spilt
}
So what should I do there? :\
What I want to get is :
firstword[0] will give "Hello"
firstword[1] will give "sss"
firstword[2] will give "mmm"
Use regular expression
var totalWords = "foo love bar very much.";
var firstWord = totalWords.replace(/ .*/,'');
$('body').append(firstWord);
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
Split again by a whitespace:
var firstWords = [];
for (var i=0;i<codelines.length;i++)
{
var words = codelines[i].split(" ");
firstWords.push(words[0]);
}
Or use String.prototype.substr() (probably faster):
var firstWords = [];
for (var i=0;i<codelines.length;i++)
{
var codeLine = codelines[i];
var firstWord = codeLine.substr(0, codeLine.indexOf(" "));
firstWords.push(firstWord);
}
To get first word of string you can do this:
let myStr = "Hello World"
let firstWord = myStr.split(" ")[0]
console.log(firstWord)
split(" ") will convert your string into an array of words (substrings resulted from the division of the string using space as divider) and then you can get the first word accessing the first array element with [0].
See more about the split method.
I 'm using this :
function getFirstWord(str) {
let spaceIndex = str.indexOf(' ');
return spaceIndex === -1 ? str : str.substring(0, spaceIndex);
};
How about using underscorejs
str = "There are so many places on earth that I want to go, i just dont have time. :("
firstWord = _.first( str.split(" ") )
An improvement upon previous answers (working on multi-line or tabbed strings):
String.prototype.firstWord = function(){return this.replace(/\s.*/,'')}
Or using search and substr:
String.prototype.firstWord = function(){let sp=this.search(/\s/);return sp<0?this:this.substr(0,sp)}
Or without regex:
String.prototype.firstWord = function(){
let sps=[this.indexOf(' '),this.indexOf('\u000A'),this.indexOf('\u0009')].
filter((e)=>e!==-1);
return sps.length? this.substr(0,Math.min(...sps)) : this;
}
Examples:
String.prototype.firstWord = function(){return this.replace(/\s.*/,'')}
console.log(`linebreak
example 1`.firstWord()); // -> linebreak
console.log('space example 2'.firstWord()); // -> singleline
console.log('tab example 3'.firstWord()); // -> tab
var str = "Hello m|sss sss|mmm ss"
//Now i separate them by "|"
var str1 = str.split('|');
//Now i want to get the first word of every split-ed sting parts:
for (var i=0;i<str1.length;i++)
{
//What to do here to get the first word :)
var firstWord = str1[i].split(' ')[0];
alert(firstWord);
}
This code should get you the first word,
var str = "Hello m|sss sss|mmm ss"
//Now i separate them by "|"
var str1 = str.split('|');
//Now i want to get the first word of every split-ed sting parts:
for (var i=0;i<str1.length;i++)
{
//What to do here to get the first word :(
var words = str1[i].split(" ");
console.log(words[0]);
}
In modern JS, this is simplified, and you can write something like this:
const firstWords = str =>
str .split (/\|/) .map (s => s .split (/\s+/) [0])
const str = "Hello m|sss sss|mmm ss"
console .log (firstWords (str))
We first split the string on the | and then split each string in the resulting array on any white space, keeping only the first one.
I'm surprised this method hasn't been mentioned: "Some string".split(' ').shift()
To answer the question directly:
let firstWords = []
let str = "Hello m|sss sss|mmm ss";
const codeLines = str.split("|");
for (var i = 0; i < codeLines.length; i++) {
const first = codeLines[i].split(' ').shift()
firstWords.push(first)
}
const getFirstWord = string => {
const firstWord = [];
for (let i = 0; i < string.length; i += 1) {
if (string[i] === ' ') break;
firstWord.push(string[i]);
}
return firstWord.join('');
};
console.log(getFirstWord('Hello World'));
or simplify it:
const getFirstWord = string => {
const words = string.split(' ');
return words[0];
};
console.log(getFirstWord('Hello World'));
This code should get you the first word,
const myName = 'Jahid Bhuiyan';
console.log(myName.slice(0, myName.indexOf(' ')));
Ans will be "Jahid"
I am using this as keyword s='young girl jumping'
function selfreplace(s) {
var words = ['man', 'jumping'];
var re = new RegExp('\\b(' + words.join('|') + ')\\b', 'g');
var specials = [];
var match;
var str = "";
while(match = re.exec(s)) {
str += match[0] + '(k)';
}
return str;
}
It is returning jumping(k)
I want the result to be young(s) girl(s) jumping(k)
It would probably be easiest to check if it's in words outside of the regex:
function selfreplace(s) {
var words = ['man','jumping'];
var re = new RegExp('\\b(\\w+)\\b', 'g');
var specials = [];
var match;
var str = "";
while(match = re.exec(s))
{
if (words.indexOf(match[0]) !== -1))
str += match[0] + '(k)';
else
str += match[0] + '(s)';
}
return str;
}
You can use a replace with callback.
function selfreplace(s){
return s.replace(/man|jumping|(\w+)/g, function(word, misc){
return word + (misc? '(s)' : '(k)')
})
}
If the word matched is man or jumping, only the first argument (entire match) is set. If the word matched is any other, the first capturing group is set as well.
If you don't know the set of words ahead, you can still generate the regex on the fly. Assuming words don't contain non-word characters:
function selfreplace(s, words){ //or any other method of passing 'words'
var re = RegExp(words.join("|")+"|(\\w+)",'g');
return s.replace(re, function(word, misc){
return word + (misc? '(s)' : '(k)')
})
}
Just a different approach, probably not the best solution but thought i'd throw it out there.
var str = "young girl jumping";
function replaceStr(s){
var matched = new RegExp("man|jumping", "i");
var newStr = "";
var str = s.split(" ");
for(var i=0; i<str.length;i++){
if(str[i].match(matched)){
newStr += str[i]+"(k) ";
} else {
newStr += str[i]+"(s) ";
}
}
return newStr.substr(0, newStr.length-1);
}
//replaceStr(str) returns "young(s) girl(s) jumping(k)"
DEMO here
if the matched words might change then you can always amend this function so it accepts an array as the second argument and then creates the regexp dynamically
replaceStr(s, matchArr){} and
var matched = new RegExp("("+matchArr.join("|")+")", "i");
Something like this might give you a hint:
var s = "young girl jumping",
words = ['man','jumping'],
regex = new RegExp("(" + words.join("|") +")", "g"),
q = s.replace(regex, function( string ) {
return string + "(k)";
});
console.log(q); // "young girl jumping(k)"
If you match words only, you do not really need regexps at all, do you?
What about just looking for the words with ==
function selfreplace(s) {
var words = ['man','jumping'];
var input = s.split(" ");
var str = "";
for(var i=0; i<input.length; i++){
var tmpString = "(s)";
for(var j=0; j<words.length; j++){
if(input[i] == words[j]){
tmpString = "(k)";
}
}
str += input[i]+tmpString;
}
return str;
}
You could use a RegExp for this, but for what you are doing a RegExp is overkill. I would use Array methods instead:
var selfreplace = function selfreplace(s) {
var words = ['man', 'jumping'],
i = 0,
suffix = '(s)';
s = s.split(' ');
for (i = 0; i < s.length; i += 1) {
if (words.indexOf(s[i]) > -1) {
s[i] = s[i] + '(k)';
} else {
s[i] = s[i] + '(s)';
}
}
return s.join(' ');
};
Here's a fiddle in action: http://jsfiddle.net/4KAzw/