Develop Reference

Timer shows wrong results

var seconds_lapsed = 0;
function tick() {
seconds_lapsed++;
}
function countup() {
setTimeout(function () {
if (stopped) return; // stop the loop
if (!is_paused()) {
tick();
show_time_left();
}
countup(); // <--- this is the "loop"
}, 1000);
}
This is the core of my timer. Of course I have some view to represent the result. But ticking is done here.
The problem
It shows wrong time. Have a look at this:
The timer was set for 3 hours. Twelve minutes lapsed. And the discrepancy is almost 1.5 minutes.
In the other window the timer by Google is working. This one:
So, I just compared my timer with that of google. I started them almost at once. The difference should be no more than a couple of seconds (to switch the window and press the button).
What is the reason for this, and how can I correct it?

setTimeout with an interval of 1000 does NOT run exactly after every 1 seconds.
It schedules to run after 1 second, but can be delayed with by actions running at that time.
A better way of solving this is by calculating via date difference.
I took your sample (added the missing vars/funcs) and changed the tick() function to use date diffs.
var seconds_lapsed = 0;
var startDateTime = new Date();
var stopped = false;
var is_paused = function() { return false; }
function tick() {
datediffInms = new Date() - startDateTime;
seconds_lapsed = Math.round(datediffInms / 1000);
}
function countup() {
setTimeout(function () {
if (stopped) return; // stop the loop
if (!is_paused()) {
tick();
//show_time_left();
console.log(seconds_lapsed)
}
countup(); // <--- this is the "loop"
}, 1000);
}
countup();

How do i make a javascript fuction repeat every few seconds? [duplicate]

I want repeat this code every 4 seconds, how i can do it with javascript or jquery easly ? Thanks. :)
$.get("request2.php", function(vystup){
if (vystup !== ""){
$("#prompt").html(vystup);
$("#prompt").animate({"top": "+=25px"}, 500).delay(2000).animate({"top": "-=25px"}, 500).delay(500).html("");
}
});

Use setInterval function
setInterval( fn , miliseconds )
From MDC docs:
Summary
Calls a function repeatedly, with a fixed time delay between each call to that function.
Syntax
var intervalID = window.setInterval(func, delay[, param1, param2, ...]);
var intervalID = window.setInterval(code, delay);
where
intervalID is a unique interval ID you can pass to clearInterval().
func is the function you want to be called repeatedly.
code in the alternate syntax, is a string of code you want to be executed repeatedly. (Using this syntax is not recommended for the same reasons as using eval())
delay is the number of milliseconds (thousandths of a second) that the setInterval() function should wait before each call to func. As with setTimeout, there is a minimum delay enforced.
Note that passing additional parameters to the function in the first syntax does not work in Internet Explorer.
Example
// alerts "Hey" every second
setInterval(function() { alert("Hey"); }, 1000);

setInterval(function(){
// your code...
}, 4000);

It's not too hard in javascript.
// declare your variable for the setInterval so that you can clear it later
var myInterval;
// set your interval
myInterval = setInterval(whichFunction,4000);
whichFunction{
// function code goes here
}
// this code clears your interval (myInterval)
window.clearInterval(myInterval);
Hope this helps!

Another possibility is to use setTimeout, but place it along with your code in a function that gets called recursively in the callback to the $.get() request.
This will ensure that the requests are a minimum of 4 seconds apart since the next request will not begin until the previous response was received.
// v--------place your code in a function
function get_request() {
$.get("request2.php", function(vystup){
if (vystup !== ""){
$("#prompt").html(vystup)
.animate({"top": "+=25px"}, 500)
.delay(2000)
.animate({"top": "-=25px"}, 500)
.delay(500)
.html("");
}
setTimeout( get_request, 4000 ); // <-- when you ge a response, call it
// again after a 4 second delay
});
}
get_request(); // <-- start it off

const milliseconds = 4000
setInterval(
() => {
// self executing repeated code below
}, milliseconds);

Call a Javascript function every 2 second continuously for 20 second.
var intervalPromise;
$scope.startTimer = function(fn, delay, timeoutTime) {
intervalPromise = $interval(function() {
fn();
var currentTime = new Date().getTime() - $scope.startTime;
if (currentTime > timeoutTime){
$interval.cancel(intervalPromise);
}
}, delay);
};
$scope.startTimer(hello, 2000, 10000);
hello(){
console.log("hello");
}

How can i print number in regular interval through setTimeout function?

var i=0;
function counter(){
for( i;i<100;i++){
setTimeout(()=>{
console.log(i);
},2000)
}
}
counter();
i want to print i in interval of 2 second but it prints immediately
Each call to print takes only a few microseconds. Why? Because it just calls setTimeout. Executing setTimeout takes only a few microseconds to complete. All the call does is schedule something to take place in the future. So within a few microseconds you have scheduled 10 things to take place at about 2 seconds in the future. All the schedulings happen at about the same time. So all the console logs take place at about the same time, two seconds after you scheduled them.
How can i print in interval of 2 second using for loop?
1
2
3
4
... in 2 second delay through for loop

const printNumbersForEvery2Sec = (n) => {
for (let i = 1; i <= n; i++) {
setTimeout(() => {
console.log(i)
}, i * 2000)
}
}
printNumbersForEvery2Sec(10);
Taken from here

Use setInterval(), like this:
var i=0;
var intervalID;
function printAndIncrement()
{
// Stop interval procedure when "var i" reach to 100.
if (i > 100)
{
clearInterval(intervalID);
return;
}
console.log(i);
i++;
}
intervalID = setInterval(printAndIncrement, 1000);

How can i print in interval of 2 second?
'Drift' due to CPU time is a consideration.
If your use case is running code spaced 2 seconds apart minimum, use setTimeout():
let ctr = 1
const fn = () => {
console.log(ctr++)
setTimeout(fn, 2000) // set the next run
}
setTimeout(fn, 2000) // set 1st run
If your use case is running code spaced 2 seconds apart maximum, use setInterval():
let ctr = 1
const fn = () => console.log(ctr++)
setInterval(fn, 2000)
More on JS CPU Timer drift here: https://johnresig.com/blog/how-javascript-timers-work/
Cheers,

function counter(){
for( let i=0;i<100;i++){
setTimeout(()=>{
console.log(i);
},2000)
}
}counter();
Just change var to let

Accurately run a function when the minute changes?

How could I accurately run a function when the minute changes? Using a setInterval could work if I trigger it right when the minute changes. But I'm worried setInterval could get disrupted by the event-loop in a long-running process and not stay in sync with the clock.
How can I run a function accurately when the minute changes?

First off, you should use setInterval for repeating timers, since it (tries to) guarantee periodic execution, i.e. any potential delays will not stack up as they will with repeated setTimeout calls. This will execute your function every minute:
var ONE_MINUTE = 60 * 1000;
function showTime() {
console.log(new Date());
}
setInterval(showTime, ONE_MINUTE);
Now, what we need to do is to start this at the exact right time:
function repeatEvery(func, interval) {
// Check current time and calculate the delay until next interval
var now = new Date(),
delay = interval - now % interval;
function start() {
// Execute function now...
func();
// ... and every interval
setInterval(func, interval);
}
// Delay execution until it's an even interval
setTimeout(start, delay);
}
repeatEvery(showTime, ONE_MINUTE);

This may be an idea. The maximum deviation should be 1 second. If you want it to be more precise, lower the milliseconds of setTimeout1.
setTimeout(checkMinutes,1000);
function checkMinutes(){
var now = new Date().getMinutes();
if (now > checkMinutes.prevTime){
// do something
console.log('nextminute arrived');
}
checkMinutes.prevTime = now;
setTimeout(checkChange,1000);
}
1 But, see also this question, about accuracy of timeouts in javascript

You can try to be as accurate as you can, setting a timeout each X milliseconds and check if the minute has passed and how much time has passed since the last invocation of the function, but that's about it.
You cannot be 100% sure that your function will trigger exactly after 1 minute, because there might be something blocking the event-loop then.
If it's something vital, I suggest using a cronjob or a separate Node.js process specifically for that (so you can make sure the event loop isn't blocked).
Resources:
http://www.sitepoint.com/creating-accurate-timers-in-javascript/

I've put up a possible solution for you:
/* Usage:
*
* coolerInterval( func, interval, triggerOnceEvery);
*
* - func : the function to trigger
* - interval : interval that will adjust itself overtime checking the clock time
* - triggerOnceEvery : trigger your function once after X adjustments (default to 1)
*/
var coolerInterval = function(func, interval, triggerOnceEvery) {
var startTime = new Date().getTime(),
nextTick = startTime,
count = 0;
triggerOnceEvery = triggerOnceEvery || 1;
var internalInterval = function() {
nextTick += interval;
count++;
if(count == triggerOnceEvery) {
func();
count = 0;
}
setTimeout(internalInterval, nextTick - new Date().getTime());
};
internalInterval();
};
The following is a sample usage that prints the timestamp once every minute, but the time drift is adjusted every second
coolerInterval(function() {
console.log( new Date().getTime() );
}, 1000, 60);
It's not perfect, but should be reliable enough.
Consider that the user could switch the tab on the browser, or your code could have some other blocking tasks running on the page, so a browser solution will never be perfect, it's up to you (and your requirements) to decide if it's reliable enough or not.

Tested in browser and node.js
sleeps until 2 seconds before minute change then waits for change
you can remove logging as it gets pretty cluttered in log otherwise
function onMinute(cb,init) {
if (typeof cb === 'function') {
var start_time=new Date(),timeslice = start_time.toString(),timeslices = timeslice.split(":"),start_minute=timeslices[1],last_minute=start_minute;
var seconds = 60 - Number(timeslices[2].substr(0,2));
var timer_id;
var spin = function (){
console.log("awake:ready..set..");
var spin_id = setInterval (function () {
var time=new Date(),timeslice = time.toString(),timeslices = timeslice.split(":"),minute=timeslices[1];
if (last_minute!==minute) {
console.log("go!");
clearInterval(spin_id);
last_minute=minute;
cb(timeslice.split(" ")[4],Number(minute),time,timeslice);
console.log("snoozing..");
setTimeout(spin,58000);
}
},100);
};
setTimeout(spin,(seconds-2)*1000);
if (init) {
cb(timeslice.split(" ")[4],Number(start_minute),start_time,timeslice,seconds);
}
}
}
onMinute(function (timestr,minute,time,timetext,seconds) {
if (seconds!==undefined) {
console.log("started waiting for minute changes at",timestr,seconds,"seconds till first epoch");
} else {
console.log("it's",timestr,"and all is well");
}
},true);

My first thought would be to use the Date object to get the current time. This would allow you to set your set interval on the minute with some simple math. Then since your worried about it getting off, every 5-10 min or whatever you think is appropriate, you could recheck the time using a new date object and readjust your set interval accordingly.
This is just my first thought though in the morning I can put up some code(its like 2am here).

This is a fairly straightforward solution ... the interval for the timeout is adjusted each time it's called so it doesn't drift, with a little 50ms safety in case it fires early.
function onTheMinute(callback) {
const remaining = 60000 - (Date.now() % 60000);
setTimeout(() => {
callback.call(null);
onTheMinute(callback);
}, remaining + (remaining < 50 ? 60000 : 0));
}

Here's yet another solution based on #Linus' post and #Brad's comment. The only difference is it's not working by calling the parent function recursively, but instead is just a combination of setInterval() and setTimeout():
function callEveryInterval(callback, callInterval){
// Initiate the callback function to be called every
// *callInterval* milliseconds.
setInterval(interval => {
// We don't know when exactly the program is going to starts
// running, initialize the setInterval() function and, from
// thereon, keep calling the callback function. So there's almost
// surely going to be an offset between the host's system
// clock's minute change and the setInterval()'s ticks.
// The *delay* variable defines the necessary delay for the
// actual callback via setTimeout().
let delay = interval - new Date()%interval
setTimeout(() => callback(), delay)
}, callInterval, callInterval)
}
Small, maybe interesting fact: the callback function only begins executing on the minute change after next.

The solution proposed by #Linus with setInterval is in general correct, but it will work only as long as between two minutes there are exactly 60 seconds. This seemingly obvious assumption breaks down in the presence of a leap second or, probably more frequently, if the code runs on a laptop that get suspended for a number of seconds.
If you need to handle such cases it is best to manually call setTimeout adjusting every time the interval. Something like the following should do the job:
function repeatEvery( func, interval ) {
function repeater() {
repeatEvery( func, interval);
func();
}
var now = new Date();
var delay = interval - now % interval;
setTimeout(repeater, delay);
}

Calling a function every 60 seconds

Using setTimeout() it is possible to launch a function at a specified time:
setTimeout(function, 60000);
But what if I would like to launch the function multiple times? Every time a time interval passes, I would like to execute the function (every 60 seconds, let's say).

If you don't care if the code within the timer may take longer than your interval, use setInterval():
setInterval(function, delay)
That fires the function passed in as first parameter over and over.
A better approach is, to use setTimeout along with a self-executing anonymous function:
(function(){
// do some stuff
setTimeout(arguments.callee, 60000);
})();
that guarantees, that the next call is not made before your code was executed. I used arguments.callee in this example as function reference. It's a better way to give the function a name and call that within setTimeout because arguments.callee is deprecated in ecmascript 5.

use the
setInterval(function, 60000);
EDIT : (In case if you want to stop the clock after it is started)
Script section
<script>
var int=self.setInterval(function, 60000);
</script>
and HTML Code
<!-- Stop Button -->
Stop

A better use of jAndy's answer to implement a polling function that polls every interval seconds, and ends after timeout seconds.
function pollFunc(fn, timeout, interval) {
var startTime = (new Date()).getTime();
interval = interval || 1000;
(function p() {
fn();
if (((new Date).getTime() - startTime ) <= timeout) {
setTimeout(p, interval);
}
})();
}
pollFunc(sendHeartBeat, 60000, 1000);
UPDATE
As per the comment, updating it for the ability of the passed function to stop the polling:
function pollFunc(fn, timeout, interval) {
var startTime = (new Date()).getTime();
interval = interval || 1000,
canPoll = true;
(function p() {
canPoll = ((new Date).getTime() - startTime ) <= timeout;
if (!fn() && canPoll) { // ensures the function exucutes
setTimeout(p, interval);
}
})();
}
pollFunc(sendHeartBeat, 60000, 1000);
function sendHeartBeat(params) {
...
...
if (receivedData) {
// no need to execute further
return true; // or false, change the IIFE inside condition accordingly.
}
}

In jQuery you can do like this.
function random_no(){
var ran=Math.random();
jQuery('#random_no_container').html(ran);
}
window.setInterval(function(){
/// call your function here
random_no();
}, 6000); // Change Interval here to test. For eg: 5000 for 5 sec
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="random_no_container">
Hello. Here you can see random numbers after every 6 sec
</div>

setInterval(fn,time)
is the method you're after.

You can simply call setTimeout at the end of the function. This will add it again to the event queue. You can use any kind of logic to vary the delay values. For example,
function multiStep() {
// do some work here
blah_blah_whatever();
var newtime = 60000;
if (!requestStop) {
setTimeout(multiStep, newtime);
}
}

Use window.setInterval(func, time).

A good example where to subscribe a setInterval(), and use a clearInterval() to stop the forever loop:
function myTimer() {
}
var timer = setInterval(myTimer, 5000);
call this line to stop the loop:
clearInterval(timer);

Call a Javascript function every 2 second continuously for 10 second.
var intervalPromise;
$scope.startTimer = function(fn, delay, timeoutTime) {
intervalPromise = $interval(function() {
fn();
var currentTime = new Date().getTime() - $scope.startTime;
if (currentTime > timeoutTime){
$interval.cancel(intervalPromise);
}
}, delay);
};
$scope.startTimer(hello, 2000, 10000);
hello(){
console.log("hello");
}

function random(number) {
return Math.floor(Math.random() * (number+1));
}
setInterval(() => {
const rndCol = 'rgb(' + random(255) + ',' + random(255) + ',' + random(255) + ')';//rgb value (0-255,0-255,0-255)
document.body.style.backgroundColor = rndCol;
}, 1000);
<script src="test.js"></script>
it changes background color in every 1 second (written as 1000 in JS)

// example:
// checkEach(1000, () => {
// if(!canIDoWorkNow()) {
// return true // try again after 1 second
// }
//
// doWork()
// })
export function checkEach(milliseconds, fn) {
const timer = setInterval(
() => {
try {
const retry = fn()
if (retry !== true) {
clearInterval(timer)
}
} catch (e) {
clearInterval(timer)
throw e
}
},
milliseconds
)
}

here we console natural number 0 to ......n (next number print in console every 60 sec.) , using setInterval()
var count = 0;
function abc(){
count ++;
console.log(count);
}
setInterval(abc,60*1000);

I see that it wasn't mentioned here if you need to pass a parameter to your function on repeat setTimeout(myFunc(myVal), 60000); will cause an error of calling function before the previous call is completed.
Therefore, you can pass the parameter like
setTimeout(function () {
myFunc(myVal);
}, 60000)
For more detailed information you can see the JavaScript garden.
Hope it helps somebody.

I favour calling a function that contains a loop function that calls a setTimeout on itself at regular intervals.
function timer(interval = 1000) {
function loop(count = 1) {
console.log(count);
setTimeout(loop, interval, ++count);
}
loop();
}
timer();

There are 2 ways to call-
setInterval(function (){ functionName();}, 60000);
setInterval(functionName, 60000);
above function will call on every 60 seconds.