Was wondering if anyone has any experience or could help with the logic, to track a user (car) with Bing maps
As the user travels a line should be drawn of their journey, but snap to roads, the way I have things set at the moment, lines will be drawn through buildings.
Because whenever there is an update to the position, 2 points are calculated and a line is added to the map
(At the moment am using watchPosition but in future will get position every 30 seconds)
watchPos() {
let options = { timeout: 60000 }
this.watchId = navigator.geolocation.watchPosition((position) => {
this.lat = position.coords.latitude;
this.lng = position.coords.longitude;
this.setMap()
console.log(this.lat, this.lng)
}, this.errorHandler, options);
}
setMap() {
this.loc = new Microsoft.Maps.Location(this.lat, this.lng);
if (!this.initialised) {
this.oldLoc = this.loc;
this.initialised = true
this.map = new Microsoft.Maps.Map(this.driveMap.nativeElement, {
credentials: CONFIG.BING_API_KEY,
center: this.loc,
mapTypeId: Microsoft.Maps.MapTypeId.road,
navigationBarMode: 2,
zoom: this.zoom
});
this.user = new Microsoft.Maps.Pushpin(this.loc, { icon: '../images/icon.svg' });
this.map.entities.push(this.user);
// console.log(loc)
} else {
// Draw line
// from this.oldLoc to this.loc
let lineVertices = new Array(this.oldLoc, this.loc);
let line = new Microsoft.Maps.Polyline(lineVertices);
// Then set oldLoc to new loc
this.oldLoc = this.loc
this.map.entities.push(line);
this.map.setView({
center: this.loc
});
this.user.setLocation(this.loc);
}
}
Bing Maps has a snap to road API coming out near the end of next week which is specifically designed for this. You pass in your GPS coordinates and it will snap it to the roads, additionally, if you pass in an array of points you can also have it return a logical path that passes through the snapped points. Watch the Bing Maps blog for the announcement: https://blogs.bing.com/maps
Related
I am working with a WordPress/jQuery/Google Maps setup to display a map of listings to users.
The jQuery.goMap.map code is used to load in the Google Maps instance used on the WordPress plugin.
I have wrote the following functions to store and load the latitude, longitude, and zoom level with local storage. The storing of the lat/lng and zoom levels is working, and the loading of the zoom level is working, but I cannot get the map to center on the loaded latitude and longitude position.
I have tried using bounds.extend(latLng); and jQuery.goMap.map.fitBounds(bounds); in the loadUserZoom function, but the result is a fully zoomed in map. This means the stored zoom level value is being ignored.
The current functioning code can be tested here.
The Clear text link in the header navigation can be used to clear the local storage values from the browser. This is implemented for testing purposes.
Any assistance is greatly appreciated.
Function: storeUserZoom
function storeUserZoom() {
let zoom = jQuery.goMap.map.getZoom();
localStorage.setItem( 'zoom', zoom);
let center = jQuery.goMap.map.getCenter();
let lat = center.lat();
let lng = center.lng();
let latLng = {
lat: lat,
lng: lng
}
localStorage.setItem( 'latLng', JSON.stringify(latLng));
}
Function: loadUserZoom
function loadUserZoom() {
if (localStorage.getItem( 'zoom' )) {
let zoom = parseInt(localStorage.getItem( 'zoom' ));
console.log(zoom);
// Logs correct zoom level
let latLng = JSON.parse(localStorage.getItem( 'latLng' ));
console.log(latLng);
// Logs Object { lat: 51.69124213478852, lng: -113.2478200914128 }
jQuery.goMap.map.setZoom(zoom);
jQuery.goMap.map.setCenter(latLng);
// latLng used is incorrect
}
}
I believe I have zeroed in on the problem by adjusting how the loadUserZoom function was executed in the initMap function.
The loadUserZoom function was wrapped in a Google Maps listen once event listener when the map was idle. The code is included below.
google.maps.event.addListenerOnce(jQuery.goMap.map, 'idle', function() {
loadUserZoom();
});
I had it set initially to addListener, which seemed to conflict with the required functionality. I assume this meant it was execute regularly whenever the map was in an idle state.
My updated loadUserZoom function is included below.
function loadUserZoom() {
if (localStorage.getItem( 'zoom' )) {
let zoom = parseInt(localStorage.getItem( 'zoom' ));
let latLng = JSON.parse(localStorage.getItem( 'latLng' ));
jQuery.goMap.map.setZoom(zoom);
jQuery.goMap.map.setCenter(latLng);
}
}
I'm migrating from Google Maps API to Apple MapKit JS for the simple reason I have a developer account with them and they offer more free hits.
Anyway, actual examples of MapKit JS are a bit thin (or at least Google isn't finding them - draw what conspiracy theories you will), so although I've got the basics going of displaying an embeded map, I can't seem to do the next step which is route between two points (Apple's documentation also seems impenetrable as they don't show examples).
Here's my script for a basic map:
<script>
mapkit.init({
authorizationCallback: function(done) {
done('[MY-TOKEN]');
}
});
var MarkerAnnotation = mapkit.MarkerAnnotation
var myMarker = new mapkit.Coordinate(55.9496320, -3.1866360)
var myRegion = new mapkit.CoordinateRegion(
new mapkit.Coordinate(55.9496320, -3.1866360),
new mapkit.CoordinateSpan(0.003, 0.003)
);
var map = new mapkit.Map("map");
var myAnnotation = new MarkerAnnotation(myMarker, { color: "#9b6bcc", title: "theSpace On The Mile"});
map.showItems([myAnnotation]);
map.region = myRegion;
</script>
Now I want to:
• Show a walking route between two points
• Include waypoints on the route
Could someone show the code that would achieve this? Once I can see an example I know I'll get it ;-)
Ok, so I've found a solution to this so sharing it here for the benefit of others.
Let's start by saying Apple's MapKit JS doesn't appear to have a waypoints option as offered by Google Maps API - so the way around that is to create a map that stores the markers in an array and then routes from one to the next. The code stores the location of the last waypoint in a variable, and doesn't bother to draw a route to the last waypoint if this is the first one in the array (obviously).
<script>
// Initiallise MapKit - you'll need your own long-lived token for this
mapkit.init({
authorizationCallback: function(done) {
done('[MY-TOKEN]');
}
});
// Function to draw the route once MapKit has returned a response
function directionHandler(error, data) {
data["routes"].forEach(function(route, routeIdx) {
if (routeIdx !== 0) { return; }
overlays = [];
route['path'].forEach(function(path) {
// This styles the line drawn on the map
let overlayStyle = new mapkit.Style({
lineWidth: 3,
strokeColor: "#9b6bcc"
});
let overlay = new mapkit.PolylineOverlay(path, {
style: overlayStyle
});
overlays.push(overlay);
});
map.addOverlays(overlays);
});
}
// This asks MapKit for directions and when it gets a response sends it to directionHandler
function computeDirections(origin,destination) {
let directionsOptions = {
origin: origin,
destination: destination,
transportType: mapkit.Directions.Transport.Walking
};
directions.route(directionsOptions, directionHandler);
}
// This sets the initial region, but is overridden when all points have been potted to automatically set the bounds
var myRegion = new mapkit.CoordinateRegion(
new mapkit.Coordinate(55.9496320, -3.1866360),
new mapkit.CoordinateSpan(0.05, 0.05)
);
var map = new mapkit.Map("map");
map.region = myRegion;
var myAnnotations = [];
// lastWaypoint variable is 'unset' initially so the map doesn't try and find a route to the lastWaypoint for the first point of the route
var lastWaypoint = "unset";
var directions = new mapkit.Directions();
// Array of co-ordinates and label for marker
waypoints = [
{name:'Sofi’s Bar',lat:55.9746308,lon:-3.1722282},
{name:'TThe Roseleaf Cafe',lat:55.975992,lon:-3.173474},
{name:'Hemingway’s',lat:55.9763631,lon:-3.1706564},
{name:'Teuchter’s Landing',lat:55.9774693,lon:-3.1713826},
{name:'The King’s Wark',lat:55.9761425,lon:-3.1695419},
{name:'Malt and Hops',lat:55.975885,lon:-3.1698957},
{name:'The Carrier’s Quarters',lat:55.9760813,lon:-3.1685323},
{name:'Noble’s',lat:55.974905,lon:-3.16714},
{name:'The Fly Half',lat:55.9747906,lon:-3.1674496},
{name:'Port O’ Leith',lat:55.974596,lon:-3.167525}
];
// Loop through the array and create marker for each
waypoints.forEach(function(data) {
var myAnnotation = new mapkit.MarkerAnnotation(new mapkit.Coordinate(data['lat'],data['lon']), {
color: "#9b6bcc",
title: data['name']
});
myAnnotations.push(myAnnotation);
// As long as this isn't the first point on the route, draw a route back to the last point
if(lastWaypoint!="unset") {
computeDirections(lastWaypoint,new mapkit.Coordinate(data['lat'],data['lon']));
}
lastWaypoint = new mapkit.Coordinate(data['lat'],data['lon']);
});
map.showItems(myAnnotations);
</script>
This map is for a pub crawl around Leith, so the trasportType is 'Walking', but change that to 'Automobile' if you so wish.
With credit to Vasile whose MapKit JS Demo (https://github.com/vasile/mapkit-js-demo) helped me understand a lot more about the options.
So as the title says, I'm using React and trying to implement Google Maps with list of places fetched from Foursquare and display their markers. I'm not using any packages such as react-google-maps etc, just vanilla JS. The map loads just fine, the places are fetched BUT the markers show every now and then. When they do load, they point to correct location but they load rarely. I'm not sure what's wrong with my createMarkers function here:
// Initialize map
initMap = () => {
let map = new window.google.maps.Map(document.getElementById("map"), {
zoom: 14,
center: {lat: 45.5616873, lng: 18.6770196 }
});
this.createMarkers(map);
}
// The following function uses the places array to create an array of markers on initialize.
createMarkers = (map) => {
for (let i = 0; i < this.state.places.length; i++) {
// Get the position from the location array
let position = this.state.places[i].location;
let name = this.state.places[i].name;
let venueID = this.state.places[i].venueID;
// Create a marker per location, and put into markers array.
let marker = new window.google.maps.Marker({
position: position,
name: name,
animation: window.google.maps.Animation.DROP,
icon: this.state.defaultIcon,
venueID: venueID,
map: map
});
// Set state to save the marker to our array of markers.
this.setState((state) => ({
markers: [...state.markers, marker]
}))
}
}
// Create default marker icon
makeMarkerIcon(markerColor) {
const markerImage = new window.google.maps.Icon(
'http://chart.googleapis.com/chart?chst=d_map_spin&chld=1.15|0|'+ markerColor +
'|40|_|%E2%80%A2',
new window.google.maps.Size(21, 34),
new window.google.maps.Point(0, 0),
new window.google.maps.Point(10, 34),
new window.google.maps.Size(21,34)
);
return markerImage;
};
Any help would be much appreciated, as I'm still new to React and prone to beginner's mistakes.
I have a web application, where a user can switch between some 160-ish layers. Most of them are Feature Layers, but some are of type ArcGISDynamicMapServiceLayer.
I need to be able to query those layers the same as I do with FeatureLayers: by clicking on any point on the map and displaying an infowindow.
This is my code so far (removed some bits for clarity):
executeQueryTask: function(evt, scope) {
//"this" is the map object in this context, so we pass in the scope from the caller,
//which will enable us to call the layer and map object and all the other precious widget properties
scope.map.graphics.clear();
scope.map.infoWindow.hide();
//we create a new Circle and set its center at the mappoint. The radius will be 20 meters
//default unit is meters.
var circle = new Circle({
/*...*/
});
// draw the circle to the map:
var circleGraphic = new Graphic(circle, /*...*/));
scope.map.graphics.add(circleGraphic);
var queryTask = new QueryTask(scope.layer.layer.url + "/" + scope.layer.layer.visibleLayers[0]);
var query = new Query();
query.returnGeometry = true;
query.outFields = ["*"];
query.geometry = circle.getExtent();
var infoTemplate = new InfoTemplate().setTitle("");
queryTask.execute(query, function(resultSet) {
array.forEach(resultSet.features, function(feature) {
var graphic = feature;
graphic.setSymbol(/*...*/));
//Set the infoTemplate.
// graphic.setInfoTemplate(infoTemplate);
//Add graphic to the map graphics layer.
scope.map.infoWindow.setContent(graphic.attributes);
scope.map.infoWindow.show(evt.mapPoint, scope.map.getInfoWindowAnchor(evt.screenPoint));
scope.map.graphics.add(graphic);
});
});
},
The key point is insise the queryTask.execute callback. If I uncomment and use graphic.setInfoTemplate(infoTemplate); the result is colored and upon a second click an infoWindow pops up.
There are 2 issues with this approach:
2 clicks are needed
I am unable to click on PolyLines and Points twice, so no infowindow pops up here.
This is why I added a circle to get a 100m buffer in radius to my click. Now I want to immediatly return an infoWindow.
At this point I'm struggeling to successfully create an Info Window, which is immediately displayed.
Currently the line scope.map.infoWindow.setContent(graphic.attributes); throws an error Failed to execute 'appendChild' on 'Node': parameter 1 is not of type 'Node'.
How can I create that Info Window?
I found a suitable approach, which leaves room for improvements. But this is for another iteration.
//create a new FeatureLayer object
var featureLayer = new FeatureLayer(scope.layer.layer.url + "/" + scope.layer.layer.visibleLayers[0], {
mode: FeatureLayer.MODE_SELECTION,
infoTemplate: new InfoTemplate("Attributes", "${*}"),
outFields: ["*"]
});
//we create a new Circle and set its center at the mappoint. The radius will be 20 meters
//default unit is meters.
var circle = new Circle({/*...*/});
// draw the circle to the map:
var circleGraphic = new Graphic(circle, /*...*/));
scope.map.graphics.add(circleGraphic);
var lQuery = new Query();
lQuery.returnGeometry = true;
lQuery.geometry = circle.getExtent();
featureLayer.queryFeatures(lQuery, function(results) {
array.forEach(results.features, function(feature) {
var graphic = feature;
graphic.setSymbol(/*...*/));
//now that we have the feature, we need to select it
var selectionQuery = new Query();
selectionQuery.geometry = feature.geometry;
featureLayer.selectFeatures(selectionQuery, FeatureLayer.SELECTION_NEW)
.then(function(selectedFeatures) {
console.info("selection complete", selectedFeatures);
if (!selectedFeatures.length) {
return;
}
scope.map.infoWindow.setFeatures(selectedFeatures);
scope.map.infoWindow.show(evt.mapPoint, "upperright");
});
});
});
The change here is, that we are no longer using a QueryTask, but create a new FeatureLayer object in selection mode, using the url and id of the visible layer.
The second noteworthy change is, that we no longer set the content of the infoWindow, but instead set selected features using infoWindow.setFeatures(selectedFeatures). Setting the content of an infoWindow, but not selecting features, hides the action list of the info window, this hinders you to zoom to an object or perform other custom operations.
In addition, this enables you( or me ) to view multiple results in the infoWindow, instead of just one.
I am teaching myself scripting and have learned a lot. I am, however, stuck at this one point. I am wanting to display a weather map and have it center to the users location. Here is what I have in the body of my html so far..
<div id="map-canvas"></div>
<div id="loading">Loading animation layers... <br>
<span id="progress"></span>% done.
</div>
<script type="text/javascript">
var map, radar, satellite;
var animationSync;
// GeoLocation Services
function showLocation(position) {
var latitude = position.coords.latitude;
var longitude = position.coords.longitude;
}
function errorHandler(err) {
if(err.code == 1) {
alert("Error: Access is denied!");
}
else if( err.code == 2) {
alert("Error: Position is unavailable!");
}
}
function getLocation(){
if(navigator.geolocation){
// timeout at 60000 milliseconds (60 seconds)
var options = {timeout:60000};
navigator.geolocation.getCurrentPosition(showLocation, errorHandler, options);
}
else{
alert("Sorry, browser does not support geolocation!");
}
}
// End GeoLocation Services
map = new aeris.maps.Map('map-canvas', {zoom: 9, center: [36.0462, -96.9942]});
// here is what I am wanting to do instead of the above line..
// map = new aeris.maps.Map('map-canvas', {zoom: 9, center: [latitude +',' + longitude]});
I can display the map perfectly if I hard code the LAT and LON but thats not what I need. I am confident my GeoLocation routine is working as the console in my browser does not show any errors, its only when I try to center the map using LAT and LONG as variables that I have a problem. I am hoping this is just a syntax type issue, but I just don't know enough to figure this out. I have also tried using the map.setCenter command but can't figure where to use it so it works.
Thanks in advance for any help.
Just replace the last line by
map = new aeris.maps.Map('map-canvas', {zoom: 9, center: [latitude, longitude]});
The quotes were not needed and transformed your array with 2 values in an array with a single string value
Current issue
The issue right now is you're performing string concatenation with latitude and longitude. You can just use them as normal inside the array:
map = new aeris.maps.Map('map-canvas', {zoom: 9, center: [latitude, longitude]});
More info that may be of use:
The thing to remember is that both these variables need to be in scope, which they currently aren't. latitude and longitude exist only inside showLocation(), and to further complicate things, it's a callback which means your new aeris.maps.Map() will fail because neither values are set.
If you're just trying to display a map around the position of the current user, this should do it:
var map, radar, satellite;
var animationSync;
// GeoLocation Services
function showLocation(position) {
var latitude = position.coords.latitude;
var longitude = position.coords.longitude;
map = new aeris.maps.Map("map-canvas", {
zoom: 9,
center: [latitude, longitude]
});
}
function errorHandler(err) {
if (err.code == 1) {
alert("Error: Access is denied!");
} else if (err.code == 2) {
alert("Error: Position is unavailable!");
}
}
function getLocation() {
if (navigator.geolocation) {
// timeout at 60000 milliseconds (60 seconds)
var options = {
timeout: 60000
};
navigator.geolocation.getCurrentPosition(showLocation, errorHandler, options);
} else {
alert("Sorry, browser does not support geolocation!");
}
}
getLocation();
It's a bit tricky since the action happens asynchronously, meaning anything you do with map have to happen after showLocation is called.