I use WebJars to manage my JavaScript dependencies which means that most of the libraries I use are outside the Require.js base path. The config is created automatically and it works for most libraries. I only have problems with those libraries that call require() to load some inner dependencies (usually just external files) - for example when.js.
This is the require.js config generated for when library:
requirejs.config({"paths":{"when":["/webjars/when-node/3.5.2/when","when"]}});
This file loads properly. But the problem is that it tries to load further files:
...
var timed = require('./lib/decorators/timed');
var array = require('./lib/decorators/array');
var flow = require('./lib/decorators/flow');
var fold = require('./lib/decorators/fold');
...
I would expect require.js to use the location of when.js to determine the correct locations of the other required files, i. e.:
/webjars/when-node/3.5.2/lib/decorators/timed.js
But unfortunately require.js uses instead the location of the main.js file as the base path which obviously results in a lot of 404 errors and the application crashes.
How can I tell require.js to look in the correct subdirectory?
So according to the RequireJS documentation this seems to be the correct behavior. Unlike CommonJS, every require() call is resolved using the base path (it is relative to the base path, not to the location of the file it is called in).
The only way to get around this (as far as I know) is to configure the dependency as a package. The package location is then used for path resolution instead of the general base path. For the mentioned when package, the configuration should look something like this:
requirejs.config({
packages: [
{ name: 'when', location: '/path/to/when', main: 'when' }
]
});
To fix this problem automatically for all my current or future dependencies, I've replaced the Scala Play Framework loading script with my own solution which loads all WebJars as separate packages.
var require = {
callback : function () {
var packages = [];
var shim = {};
[
#for(webJarJson <- org.webjars.RequireJS.getSetupJson(routes.WebJarAssets.at("").url).values()) {
#Html(webJarJson.toString),
}
].forEach(function (webjar) {
if (webjar.paths) {
for (var name in webjar.paths) {
if (webjar.paths.hasOwnProperty(name)) {
packages.push({
name: name,
location: webjar.paths[name][0].replace(/\/[^\/]+$/, ""),
main: webjar.paths[name][1]
});
}
}
}
if (webjar.shim) {
for (var name in webjar.shim) {
if (webjar.shim.hasOwnProperty(name)) {
shim[name] = webjar.shim[name];
}
}
}
});
requirejs.config({
packages: packages,
shim: shim
});
}
}
Related
I am trying to integrate requirejs framework to my app.
Is possible to create a virtual module (which doesn't exists as a physically file), where i could group all the jquery-validation plugins together?
For example, i need to load 4 dependencies everytime i want to use jquery-validate.
Instead of requesting them, each time, i create a jquery-val "virtual module", which should request all the dependencies automatically.
However, trying to load "jquery-val" actually tries to load the file from disk (which i don't have).
What should be the best practice in solving this issue?
// config
requirejs.config({
baseUrl: '/Content',
paths: {
'jquery': 'frameworks/jquery-3.1.1.min',
"jquery-validate": "frameworks/jquery.validate.min",
"jquery-validate-unobtrusive": "frameworks/jquery.validate.unobtrusive.min",
"jquery-unobtrusive-ajax": "frameworks/jquery.unobtrusive-ajax.min"
},
shim: {
"jquery-val": ["jquery", "jquery-validate", "jquery-validate-unobtrusive", "jquery-unobtrusive-ajax"]
}
});
// Solution 1: working, but ugly
define(["jquery", "jquery-validate-unobtrusive", "jquery-unobtrusive-ajax"], function ($) {
// My Module
});
// Solution 2: not working
define(["jquery-val"], function () {
// My Module
});
// Solution 3: create jquery-val.js file, which loads the dependencies automatically
// jquery-val.js
(function (global) {
define(["jquery", "jquery-validate-unobtrusive", "jquery-unobtrusive-ajax"], function ($) {
});
}(this));
take some time and read:
http://requirejs.org/docs/api.html#modulenotes
One module per file.: Only one module should be defined per JavaScript file, given the nature of the module name-to-file-path lookup algorithm. You shoud only use the optimization tool to group multiple modules into optimized files.
Optimization Tool
To answer your question:
It is good practice to define one module per file, so you don't need to define explicit a name for the module AND do the need for inserting it somewhere to be available before the other modules are loaded.
So you could require just the file: require("../services/myGroupModule") and this file would hold your module and requireJS would take care of the loading dependencies (and later the optimizations for concatenating into one file!). Here the module name is the file name.
You could nevertheless do the following and loading it as a file module or like you tried to define it beforehand and give the module a name:
//Explicitly defines the "foo/title" module:
define("myGroupModule",
["dependency1", "dependency2"],
function(dependency1, dependency2) {
return function myGroupModule {
return {
doSomething: function () { console.log("hey"); }
}
}
}
);
Maybe you should also give a look at some new module loaders:
WebPack 2: https://webpack.js.org/
SystemJS: https://github.com/systemjs/systemjs
My page includes several components that exist as separate AMD modules. Each of these components is turned into a single file by the Require.js optimiser. Because several of these components share dependencies (e.g. jQuery and d3), the optimiser paths config uses CDN URLs for those dependencies, rather than bundling them into the optimised file.
Here's where it gets tricky. I've written a module loader plugin for Ractive.js called rvc.js, which allows me to include Ractive components that are defined in HTML files. (Yes, I'm asking for help on how to use my own library.)
This works fine - code like this gets optimised as you'd expect:
define( function ( require ) {
var ChartView = require( 'rvc!views/Chart' );
var view = new ChartView({ el: 'chart' });
});
Because Ractive is used by several of the components, it should be served from a CDN like jQuery and d3. But it's used by rvc.js during the optimisation process, which means that the Ractive entry for the optimiser's paths config can't point to a CDN - it has to point to a local file.
Is there a way to tell Require.js 'use the local file during optimisation, but load from CDN at runtime'?
So here's the solution I eventually settled on. It feels somewhat kludgy, but it works:
Stub out the loaders and the library you don't want bundled
Add an onBuildWrite function that rewrites modules depending on the library, so that they think they're requiring something else entirely - in this case Ractive_RUNTIME
Add an entry to your runtime AMD config's paths object, so that Ractive_RUNTIME points to the CDN
My optimiser config now looks like this:
{
baseUrl: 'path/to/js/',
out: 'build/js/app.js',
name: 'app',
optimize: 'none',
paths: {
'amd-loader': 'loaders/amd-loader',
'rvc': 'loaders/rvc',
'Ractive': 'lib/Ractive'
},
stubModules: [ 'amd-loader', 'rvc', 'Ractive' ],
onBuildWrite: function ( name, path, contents ) {
if ( contents === "define('Ractive',{});" ) {
// this is the stub module, we can kill it
return '';
}
// otherwise all references to `Ractive` need replacing
return contents.replace( /['"]Ractive['"]/g, '"Ractive_RUNTIME"' );
}
}
Meanwhile, the script that loads the app.js file created by the optimiser has a config entry that points to the CDN:
require.config({
context: uniqueContext,
baseUrl: baseUrl,
paths: {
'amd-loader': 'loaders/amd-loader',
'rvc': 'loaders/rvc',
'Ractive': 'lib/Ractive',
'Ractive_RUNTIME': 'http://cdn.ractivejs.org/releases/0.3.9/Ractive.min'
}
});
I'd like to have 2 requirejs paths pointing to the same module:
var require = {
paths: {
"hardPath" : "file",
"alias" : "file"
}
}
When I run my app I get a load timeout error for "alias". If my app's js files only reference one of "hardPath" or "alias" but not the other, it works fine. But if I have js files that reference both of these, I get the load timeout. Is there some reason that require.js does not allow this?
The API that RequireJS uses for this is map. You can configure it such that when any of your modules request 'alias' they are automatically given 'hardPath':
require.config({
// paths, shim, etc.
// and now remap requests for the wrong module name to the right one
map: {
'*': {
'alias': 'hardPath'
}
}
});
From the doc linked above:
In addition, the paths config is only for setting up root paths for module IDs, not for mapping one module ID to another one.
I am currently working myself into requirejs, to do this I started to write a small package. The package consists of one main.js, the entry point for the application and several other modules that will be loaded into main.js through a call to require.
The package has several options that can be configured during runtime, to ease maintenance I have a central configuration.js that is loaded whenever needed. The contents of configuration.js is just an object that maps key to value, no functionality or anything. Just a key-value map.
Now requirejs allows to pass options to packages, the configuration is done through the requirejs config. The problem I have is, that it is only available in the main.js and not in other modules in the package, also I could not find a way to set default values unless I hardcode them into the main.js.
My current approach (the one with the configuration.js) is to merge the configuration given to requirejs with the contents of my configuration.js in the main.js.
main.js
define(function(require, exports, module) {
var $ = require('jquery'); // Could be any library that offers an "extend"
// feature that allows "deep" copies.
var config = require('configuration'); // Load configuration file
$.extend(true, config, module.config()); // Overwrite default values with
// set values
var otherfile = require('anyotherfile);
otherfile();
});
anyotherfile.js
define(function(require, exports, module) {
var config = require('config'); // Loads configuration, package-wide
// options are set
// module.config() will be empty. Unless I explicicy specify the
// configuration for this one module in the "requirejs.config"
return function() {
// Something that can be configured
};
});
This way of setting configuration options makes me dependent on an additional library or my own implementation of an extend functionality (it's not much code, but still more code than no code) plus there are two points where I have to look for possible configuration mistakes which makes it harder to find errors.
So now I am searching for a better way to pass a package-wide configuration all while trying to avoid more than one point of failure. (This might be hard cause somewhere I have to store the default values if I don't want to hardcode them.) And of course the solution should not depend on any additional libraries or my own extend functionality.
After talking with jrburke about the problem the best solution is to do the extending of the config array in the configuration.js.
Example of the file configuration.js
define(function(require, exports, module) {
var $ = require('jquery'); // need jQuery for extend
var config = {
key: value,
...
};
return $.extend(true, config, module.config());
});
So there is no more need to do this in the main.js.
The only disadvantage of this approach is that in the requirejs.config you have to address
package/configuration and not package.
Example of the requirejs.config
requirejs.config({
config: {
"package/configuration": {
key: value
}
}
});
Is it possible to "require" an entire folder using requireJS.
For example, I have a behaviors folder with a ton of behavior js files. I'd really like to be able to simply use require(['behaviors/*'], function() {...}); to load everything in that folder rather than having to keep that list up to date. Once compressed and optimized I'd have all those files lump together, but for development it's easier to work with them individually.
javascript in browser has no filesystem access and so it can't scan a directory for files. If you are building your app in a scripting language like php or ruby you could write a script that scans the directory and adds the file names to the require() call.
I don't know if I can recommend this approach anymore. I think the more explicit way to do this is by manually "requiring"/"exporting" the functionality you need. The exception I think is if you have a "namespace" of files that you want exported see below "Babel and ES6 Module Import Declarations (export-namespace-from) or see below "Babel and ES6 Module Import Declarations.
These solutions also assume that you have a meaningful file structure - where file names become part of that "require" * definition.
However, if you still need to do this there are a few existing tools and methods that might provide the behavior that you're looking for.
Possible Solutions
Babel and ES6 Module Import Declarations (plugin-export-namespace-from)
Have a setup that is ES6 compliant.
You need to update your .babelrc file to include babel-plugin-proposal-export-namespace-from.
Use export namespace plugin by writing syntax like the following:
common/index.js
export * from './common/a'; // export const a = false;
export * from './common/b'; // export const b = true;
main.js
import { a, b } from './common';
console.log(a); // false
console.log(b); // true
Babel and ES6 Module Import Declarations (plugin-wildcard)
Have a setup that is ES6 compliant.
You need to update your .babelrc file to include babel-plugin-wildcard.
Use wildcard namespace plugin by writing syntax like the following:
main.js
import { a, b } from './common/*'; // imports './common/a.js' and './common/b.js'
console.log(a); // false
console.log(b); // true
RequireJS (Now Outdated)
Download and install require-wild npm install require-wild
Configure the declaration as follows
grunt.initConfig({
requireWild: {
app: {
// Input files to look for wildcards (require|define)
src: ["./**/*.js"],
// Output file contains generated namespace modules
dest: "./namespaces.js",
// Load your require config file used to find baseUrl - optional
options: { requireConfigFile: "./main.js" }
}
}
});
grunt.loadNpmTasks("require-wild");
grunt.registerTask('default', ['requireWild']);
Then run the grunt task. Your file will be generated. Modify your setup to load namespaces.js
require(['namespaces'], function () { ... });
This now allows modules under src to use dependencies glob pattern matching.
require(['behaviors/**/*'], function (behaviors) { }
I know this is old, but I'd like to share my solution:
For this solution you need JQuery
1) Create a bash script that will list all the js files in
"MyDirectory/", and save it to "directoryContents.txt":
#!/bin/bash
#Find all the files in that directory...
for file in $( find MyDirectory/ -type f -name "*.js" )
do
fileClean=${file%.js} #Must remove .js from the end!
echo -n "$fileClean " >> MyDirectory/directoryContents.txt
done
File will look like this:
MyDirectory/FirstJavascriptFile MyDirectory/SecondJavascriptFile
MyDirectory/ThirdJavascriptFile
Problem with my script! Puts an extra " " at the end, that messes things up! Make sure to remove the excess space at the end of directoryContents.txt
2) Then in your Client side JS code:
do a "GET" request to retrieve the text file
For each entry (split by the space), 'require' that file:
.
$.get( "MyDirectory/directoryContents.txt", {}, function( data ) {
var allJsFilesInFolder = data.split(" ");
for(var a=0; a<allJsFilesInFolder.length; a++)
{
require([allJsFilesInFolder[a]], function(jsConfig)
{
//Done loading this one file
});
}
}, "text");
I was having a problem with this code not finishing before my other code, so Here's my extended answer:
define([''], function() {
return {
createTestMenu: function()
{
this.loadAllJSFiles(function(){
//Here ALL those files you need are loaded!
});
},
loadAllJSFiles: function(callback)
{
$.get( "MyDirectory/directoryContents.txt", {}, function( data ) {
var allJsFilesInFolder = data.split(" ");
var currentFileNum = 0;
for(var a=0; a<allJsFilesInFolder.length; a++)
{
require([allJsFilesInFolder[a]], function(jsConfig)
{
currentFileNum++;
//If it's the last file that needs to be loaded, run the callback.
if (currentFileNum==allJsFilesInFolder.length)
{
console.log("Done loading all configuration files.");
if (typeof callback != "undefined"){callback();}
}
});
}
}, "text");
}
}
});
What I ended up doing was everytime my Node server boots, it will run the bash script, populating directoryContents.txt. Then My client side just reads directoryContents.txt for the list of files, and requires each in that list.
Hope this helps!
There isn't really a way to do this conceptually on the fly (that I know of).
There's a few work arounds though:
Use grunt and concat and then just require that behemoth...I know, kinda sucky.
What I think is a better solution... use a require hierarchy like so:
require('/js/controllers/init', function(ctrls){
ctrls(app, globals);
});
// /js/controllers/init.js
define('js/controllers/index', 'js/controllers/posts', function(index, posts){
return function protagonist(app, globals){
var indexModule = index(app, globals);
var indexModule = posts(app, globals);
return app || someModule;
};
});
// /js/controllers/index.js
define('js/controllers/index', 'js/controllers/posts', function(index, posts){
return function protagonist(app, globals){
function method1(){}
function method2(){}
return {
m1: method1,
m2: method2
};
};
});
Note that "protagonist" function. That allows you to initialize modules before their use, so now you can pass in a 'sandbox' -- in this case app and globals.
Realistically, you wouldn't have /js/controllers/index.js... It should probably be something like /js/controllers/index/main.js or /js/controllers/index/init.js so that there is a directory adjacent to (sibling of) /js/controllers/init.js called "index". This will make your modules scalable to a given interface -- you can simply swap modules out and keep your interface the same.
Hope this helps! Happy coding!
I wrote a library to solve this problem. Eventually someone else came along and improved my library, here it is:
https://github.com/smartprocure/directory-metagen
You can use my lib with Gulp or whatever - it generates metadata for your project and RequireJS can use that metadata to require the desired files from the filesystem.
Using this lib will produce a RequireJS module that looks something like this:
define(
[
"text!app/templates/dashboardTemplate.ejs",
"text!app/templates/fluxCartTemplate.ejs",
"text!app/templates/footerTemplate.ejs",
"text!app/templates/getAllTemplate.ejs",
"text!app/templates/headerTemplate.ejs",
"text!app/templates/homeTemplate.ejs",
"text!app/templates/indexTemplate.ejs",
"text!app/templates/jobsTemplate.ejs",
"text!app/templates/loginTemplate.ejs",
"text!app/templates/overviewTemplate.ejs",
"text!app/templates/pictureTemplate.ejs",
"text!app/templates/portalTemplate.ejs",
"text!app/templates/registeredUsersTemplate.ejs",
"text!app/templates/userProfileTemplate.ejs"
],
function(){
return {
"templates/dashboardTemplate.ejs": arguments[0],
"templates/fluxCartTemplate.ejs": arguments[1],
"templates/footerTemplate.ejs": arguments[2],
"templates/getAllTemplate.ejs": arguments[3],
"templates/headerTemplate.ejs": arguments[4],
"templates/homeTemplate.ejs": arguments[5],
"templates/indexTemplate.ejs": arguments[6],
"templates/jobsTemplate.ejs": arguments[7],
"templates/loginTemplate.ejs": arguments[8],
"templates/overviewTemplate.ejs": arguments[9],
"templates/pictureTemplate.ejs": arguments[10],
"templates/portalTemplate.ejs": arguments[11],
"templates/registeredUsersTemplate.ejs": arguments[12],
"templates/userProfileTemplate.ejs": arguments[13]
}
});
You can then require modules in your front-end like so:
var footerView = require("app/js/jsx/standardViews/footerView");
however, as you can see this is too verbose, so the magic way is like so:
name the dependency above as allViews!
now you can do:
var allViews = require('allViews');
var footerView = allViews['standardViews/footerView'];
There are two advantages to requiring directories whole:
(1) in production, with the r.js optimizer, you can point to one dependency (module A) and it can then easily trace all of A's dependencies that represent a entire directory
(2) in development, you can require whole directories up front and then use synchronous syntax to require dependencies because you know they have already been loaded
enjoy "RequireJS-Metagen"
https://github.com/smartprocure/directory-metagen
https://www.npmjs.com/package/requirejs-metagen
https://github.com/ORESoftware/requirejs-metagen