While installing the dependencies of vue-cli, vue is not identified. Why?
rm -rf node_modules and npm install again
have a look here
Add sudo before yarn when installing
yarn global remove #vue/cli
sudo yarn global add #vue/cli
vue
I had the same issue for a while.
TL;DR
npm install #vue/cli-service --save-dev
As the documentation specify it is a development dependency https://cli.vuejs.org/guide/#cli-service
The CLI Service (#vue/cli-service) is a development dependency. It's an npm package installed locally into every project created by #vue/cli.
Origin
I had a fresh install of nodejs
And just did
>> sudo npm install -g #vue/cli#latest
>> vue --version
#vue/cli 4.5.8
The issue
The issue presented like this
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
/bin/sh: 1: vue-cli-service: not found
error Command failed with exit code 127.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
The fixes:
npm install #vue/cli-service --save-dev
Which led me straight to another error message
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
ERROR Error: Cannot find module 'vue-template-compiler/package.json'
Which I fixed the same way
npm i vue-template-compiler --save-dev
And now it is working fine.
Installing current version without permanently installing vue-cli.
npx #vue/cli create appname
It shows the vue executable is located at /home/alisha/.local/bin. So probably this location is not there in your $PATH.
You should be able to run the vue commands if you provide the full path, like:
~/.local/bin/vue create hello-world
You can also see if that directory is in your PATH by running some command like:
echo $PATH | grep '.local/bin/'
If it's there, you would see it, otherwise you can add it to your path by placing it in your ~/.profile.
Edit ~/.profile and add the following at the bottom of it.
PATH="$HOME/.local/bin:$PATH"
Hope it helps!!
I had the same issue while making a build for production.
You will require vue-cli to be installed. Use below command to install the latest version.
npm install -g #vue/cli#latest
Then
npm install
Might have to do with you having an old version on your computer:
Warning regarding Previous Versions
The package name changed from vue-cli to #vue/cli. If you have the previous vue-cli (1.x or 2.x) package installed globally, you need to uninstall it first with
npm uninstall vue-cli -g or yarn global remove vue-cli.
You can find it here: https://cli.vuejs.org/guide/installation.html
THIS FIXED THE ISSUE FOR ME:
After running
sudo npm install -g #vue/cli
I ran
sudo nano $HOME/.profile
and pasted the following line
export PATH=$PATH:/home/chike/.npm-global/bin
after writing the code, next thing I did was Ctrl + O, ENTER and Ctrl + X then wrote
vue init webpack myapp
When you install vue using cli that time you got the path of vue.Now you can copy the bin folder path.
In my example /home/sublime/.npm-packages/bin
Now you export the path below command
export PATH=$PATH:/home/sublime/.npm-packages/bin
I solved mine by running (add sudo if needed)
npm i -g vue-cli#2.9.6
npm i -g #vue/cli
Got similar issue when deploy vue project in jenkins.
Here is what I did:
Add node's bin/ dir, to jenkins user's .bashrc file.
e.g
# node
NODE_HOME=/home/dev/.nvm/versions/node/default
PATH=$NODE_HOME/bin:$PATH
Tips - about nvm & yarn
When you manage node version via nvm, make sure you already choose the node version in terminal. e.g:
nvm use stable
node -v
If you use nvm, and installed yarn via npm, then better install vue-cli via npm not yarn, otherwise the vue executable is not placed into node's bin/ dir, at least that's the case in my tests, and as a result will cause you fail to find the vue command.
Using Yarn on Ubuntu it is installed to ~/.npm-packages/bin/. You must add this directory to your PATH. For example run the following command, close your terminal and open a new one.
user#machine:~$ echo 'export PATH="$PATH:~/.npm-packages/bin/"' >> ~/.bashrc
Note: if the file ~/.bashrc does not exist then simply create it.
Following worked for me:
First remove all the existing ones:
yarn global remove #vue/cli
yarn global remove #vue/cli-service
sudo yarn global remove #vue/cli
sudo yarn global remove #vue/cli-service
Then add #vue/cli using sudo:
Note: use sudo if required
yarn global add #vue/cli
yarn global add #vue/cli-service
Then, the final thing to do is to RESTART the terminal.
vue --version
#vue/cli 4.5.9
If you already got a project, the only two things you need to do is:
Delete the directory node_modules (it is safe, since it is not under git and will regenerate in the next step)
In the command-line write yarn install (it will install everything you need)
If you start installing vue-cli manually in a existing project, it the package.json and package-lock.json will be updated. If you already did. Do a checkout from git, and follow my steps above
This may be a problem caused by version conflicts. "export PATH=$PATH:" This is really useful in some cases. But if you are also like me, after trying the direct “export path” method in the comment above, restarting the terminal still can not execute the situation, you can try this way.
Uninstall Vue
npm uninstall -g #vue/cli
Check the local-global npm package installation path, vue is installed in this directory, check if it has been removed.
npm root -g
Install vue (you can check with https://cli.vuejs.org/#getting-started to find the latest command)
npm install -g #vue/cli
Create a connection to the /usr/local/bin directory(You need to find the vue.js path after the local installation first, then replace this path with your latest local install path:/Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js)
ln -s /Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js /usr/local/bin/vue
View version number
vue -v
I was getting the same error because Node.js was not installed. My issue got resolved by installing Node.js using the following command:
sudo apt install nodejs-legacy
To see if you already have Node.js and npm installed and check the installed version, run the following commands:
node -v
npm -v
If both are installed then follow the steps here:
https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally
I installed the package using yarn global add #vue/cli on my Ubuntu box and found the binary in /home/vonkad/.yarn/bin.
I had to modify my /home/vonkad/.bashrc and add the directory to the path export PATH=$PATH:/home/vonkad/.yarn/bin.
To fix this situation, I had to add the following line to my .zshrc (maybe in your case is .bashrc)
export PATH="$(yarn global bin):$PATH"
Effectively, the yarn global bin is a folder where vue (vue-cli 3) was placed.
What helped me
mac os catalina with zsh terminal
Uninstalled node and npm using https://www.positronx.io/how-to-uninstall-node-js-and-npm-from-macos/
Downloaded node/npm from https://nodejs.org/en/download/current/
sudo npm install -g #vue/cli
vue --version (#vue/cli 4.5.4)
I faced the same issue and now resolved. In my case I installed Node.js and NPM using the default Ubuntu repository by using this command sudo apt-get install nodejs npm
The problems seemed like those 2 packages are not well maintained so it caused some bugs.
So I purge those packages and reinstall it from nodesource which is officially recommended way to install (reference: Installation instruction from nodesource) using these commands.
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get install -y nodejs
Then reinstall #vue/cli again
sudo npm install -g #vue/cli
Now these issues have gone. Hope it helps some programmers.
You need to install vue via sudo like explained in the doc:
https://cli.vuejs.org/guide/installation.html
If you have WSL2 running and you use zsh like me, just add
yarn global add #vue/cli
# add this line to ~/.zshrc
export PATH="$HOME/.yarn/bin:$PATH"
$ vue --version
#vue/cli 4.x.xx
You can try the following code install see
npm install --global vue-cli
vue init webpack <YOUR-PROJECT-NAME-HERE>
cd <YOUR-PROJECT-NAME-HERE>
npm install
npm run dev
At work we had problem that wasn't displaying icon (from rc-menu lib) for menu block
Each time when we are running
mvn install
we are also running
npm install
inside package json we had this library
"rc-menu":"^5.10.0"
The way to fix it was to run
npm install rc-menu (Inside package.json directory)
My question why this solution works?
For me it is impossible but maybe I'm missing something?
Your version must be a missmatch.
With npm install {package_name} you are installing the latest version. And with npm install you are installing version that satisfies rules of your package.json.
As far as I can see that module doesn't have 5.10.0 version at all...
5.0.14 is the latest of 105 releases
You can try to see the version of that module if you install it with npm install by typing npm list afterwards.
I have a workspace on c9.io, and I am using node.js. I am trying to update socket.io from 0.9.17 to the latest version. However, whenever I run the command npm update socket.io it installs the same version. How can I fix this?
To install the latest available package:
npm install <package>
To install a version directly (no need to uninstall first):
npm install <package>#<version>
If you're not sure what versions of a package are available, you can use:
npm view <package> versions
Don't forget the --save flag to add dependencies to your package.json file.
Source: How do I install a previous version of an npm package?
About npm update
However, if app's package.json contains:
"dependencies": {
"dep1": "~1.1.1"
}
In this case, running npm update will install dep1#1.1.2. Even though the latest tag points to 1.2.2, this version does not satisfy ~1.1.1, which is equivalent to >=1.1.1 <1.2.0. So the highest-sorting version that satisfies ~1.1.1 is used, which is 1.1.2.
Source: npm update - Tilde Dependencies
Guys I know that using npm install -g we can install the node modules/packages globally, but I am not sure about the options --save and --save-dev
I have Googled it but still not clear about it. Please share your thoughts.
--save adds the third-party package to the package's dependencies. It will be installed together with the package whenever someone runs npm install yourPackage.
--save-dev adds the third-party package to the package's development dependencies. It won't be installed when someone installs your package. It's typically only installed if someone clones your source repository and runs npm install in it.
Dev dependencies, as the same suggests, are those dependencies that are only needed for developing the package. That can include test runners, compilers, packagers, etc.
Both types of dependencies are stored in the package's package.json file. --save adds to dependencies, --save-dev adds to devDependencies. From the documentation:
devDependencies
If someone is planning on downloading and using your module in their program, then they probably don't want or need to download and build the external test or documentation framework that you use.
In this case, it's best to map these additional items in a devDependencies object.
These things will be installed when doing npm link or npm install from the root of a package, and can be managed like any other npm configuration param. See npm-config(7) for more on the topic.
For build steps that are not platform-specific, such as compiling CoffeeScript or other languages to JavaScript, use the prepublish script to do this, and make the required package a devDependency.
Edit: As of npm 5.0.0 the installed modules are added as a dependency by default, so the --save option is no longer needed.
--save-dev is used to save the package for development purpose. Example: unit tests, minification.
--save is used to save the package required for the application to run.
--save-dev will save npm modules in development dependencies in package.json i.e it will save inside devDependencies object.
--save will save npm modules dependencies in package.json i.e it will save inside dependencies object.
I have been using mean.js version 0.3 with no problems up untill now. Today I decided to checkout mean.js 0.4 so I ran
npm install -g generator-meanjs
to install the new version of the generator, and then ran
yo meanjs
and I went through the steps of the generator which finished successfully, and I was able to run the example site.
However, when I tried to use yo to create my own modules with the following command:
yo meanjs:vertical-module customer
It runs the application setup again:
You're using the official MEAN.JS generator.
? What mean.js version would you like to generate? (Use arrow keys)
master
❯ 0.4.0
0.4.1
I tried looking for a solution, and the only thing I found was this issue:
https://github.com/meanjs/generator-meanjs/issues/79
That suggested the cause is multiple versions of the generator is installed, so I tried uninstalling with the following command and then re-installing by repeating steps I described above
npm unstall -g generator-meanjs
But I am still getting the same results
I would really appreciate any suggestions as to how resolve this. TIA!
I had the same problem, finally figured it out. Maybe it will work for you too:
# remove meanjs generator from npm global
sudo npm remove generator-meanjs -g
sudo npm cache clean -g
# figure out where my npm global modules are
npm root -g
Result: /usr/local/lib/node_modules
# cd to the npm global directory
cd /usr/local/lib/node_modules
# get the latest Yo generator code from GitHub
sudo git clone https://github.com/meanjs/generator-meanjs
# switch to the 0.4-dev branch
cd generator-meanjs
sudo git checkout origin/0.4-dev
#install (run while in generator-meanjs dir)
sudo npm install
# test it
cd ~/
mkdir tmp
cd tmp
yo meanjs:vertical-module my_crud_module
try to install the following version of meanjs generator
npm install -g meanjs/generator-meanjs#0.4-dev
then use
yo meanjs:vertical-module customer
i think that will help.
After hours of haunting errors I managed to find a way to generate crud module. As you guys know 0.4.x generators are still under development so there's a way to create another meanjs project folder with 0.3 version. You can downgrade to meanjs 0.3x without destroying the meanjs 0.4 project folder. All you have to do is to downgrade generator-meanjs to 0.1.12 version and downgrade yo to 1.3.3 or the versions till january 2015.
You can find the information about versions through:
sudo npm info -g yo
sudo npm info -g generator-meanjs
I came up with a hack to fix this issue:
1. Install the crud module when creating your meanjs application:
yo meanjs
this will install an articles crud module in the modules directory.
2. Replace all keywords article by name in all files.
3. Rename all filename with name instead of 'article' in the articles directory.
I have posted a video where I explain these steps in details:
https://www.youtube.com/watch?v=Nkpdp1ofux8