I want send a text field data to a servlet page. I dont know the process. I give the code for textbox and a button below.
Ext.onReady(function(){
var movie_form = new Ext.FormPanel({
renderTo: document.body,
frame: true,
title: 'Personal Information Form',
width: 250,
items: [{
xtype: 'textfield',
fieldLabel: 'Firstname',
name: 'firstname',
allowBlank: false
},{
xtype:'button',
text:'save'
}]
});
});
This is the code ofr a textbox and a button. when i click the button the data of the field will go to a servlet page. But I cant do that. Please any one help me. the name of the servlet page is url_servlet
in your service method (get or post )
you can get your data field values by the attribute "name".
String firstname = reg.getParameter("firstname");
For handling the data in the backend check #The Suresh Atta's answer.
I found some errata in your code:
1) Construct an Ext component with the Ext.create function.
2) Use Ext.getBody() to get the document body.
3) Put your fields in the items config and buttons in the buttons config (Not always the best practice).
Ext.create('Ext.form.Panel', {
frame: true,
title: 'Personal Information Form',
width: 250,
url: 'url_servlet',// The form will submit an AJAX request to this URL when submitted
items: [{
xtype: 'textfield',
fieldLabel: 'Firstname',
name: 'firstname',
allowBlank: false
}],
buttons: [{
text: 'Save',
handler: function() {
var form = this.up('form').getForm();
if (form.isValid()) {
form.submit({
success: function(form, action) {
Console.log('Success', action.result.msg);
},
failure: function(form, action) {
Console.log('Failed', action.result.msg);
}
});
}
}
}],
renderTo: Ext.getBody()
});
I hope this helps you a bit ;)
Related
When I click on a tree record, I try to set the values of this record and set these values in the form.
In the eventcler itemclick: this.showDataFields function is triggered:
....
showDataFields: function(view, record, item, index, event) {
//got a form with fields
var panel = view.up('maintab');
console.log(panel)
//var formfield = panel.down('actionform');
//assign values from selected record to form fields
//formfield.loadRecord(record);
},
..........
In this function, view.up ('maintab') is underfined.
The maintab is Ext.tab.Panel which houses the tree.
Why can not get the topmost container and how to do it correctly?
Made an example in fiddle
thank
You should use view.up('treepanel').nextSibling().getForm().setValues(record.data) in your showDataFields function to set these values in the form.
You could have provided a better example, therefore within the limitations that were proposed.
The answer I got was this were the changes in the ActionFormTree class that got the code below:
Ext.define('Fiddle.view.ActionFormTree', {
extend: 'Ext.form.Panel',
alias: 'widget.actionformtree',
xtype: 'actionform',//mainform,
initComponent: function(){
var me = this;
Ext.apply(me,{
items: [{
xtype: 'form',
border: false,
anchor: '100%',
height: 100,
layout: {
type: 'vbox',
align: 'middle',
pack: 'center'
},
items: [{
xtype: 'textfield',
name: 'text',
fieldLabel: 'Наименование',
itemId: 'name_field',
}, {
xtype: 'textfield',
name: 'code',
fieldLabel: 'Код',
itemId: 'code_field',
}]
}],
buttons: [{
text: 'Save Changes',
scope: me,
handler: function (button) {
//Эта панель со значениями полей
form = me.down('form');
var mainpanel = me.up('#maincontainer');
var treeform = mainpanel.down('usertree');
var sel = treeform.getSelectionModel().getSelection()[0];
store = treeform.getStore();
console.log(treeform)
store.suspendAutoSync()
var child = sel.set({
text: 'Измененное',
leaf: true
});
sel.expand()
store.resumeAutoSync();
//var currRecord = form.getRecord();
//if (currRecord) {
// form.updateRecord();
// form.reset();
//}
}
}]
});
me.callParent(arguments);
}
});
So, in this example, for it to work, you will need to have a node selected to work.
Hope it helps and finalize your question.
Sample to your code
I am creating a table which needs editable fields..
This jquery element is appended to the page:
var container = $('#up-modal .modal-body');
var table = $('<table></table>');
table.attr('id','up-table');
table.attr('style','width:auto;');
table.attr('data-toggle', 'table');
table.attr('data-search', 'true');
table.attr('data-maintain-selected', 'true');
table.attr('data-pagination','true');
table.attr('data-page-size',3);
container.append(table);
following this, the bootstrap table function is called
$("#up-table").bootstrapTable({
columns:[
{
field: 'id',
title: 'ID',
align: 'center'
},
{
field: 'Permission',
title: 'Permission',
searchable: true
},
{
field: 'Extended',
name: 'Extended',
title: 'Properties',
editable:{
type: 'text',
pk: 1,
title: 'Modify Properties',
name: 'Extended',
validate: function(value){
value = $.trim(value);
try{
JSON.parse(value);
}catch(e){
return 'Invalid json provided for properties';
}
}
}
},
{
field: 'Access',
title: 'Access',
checkbox:true
}
],
data: tableData
});
The table is drawn correctly, but the fields are not editable. I can call $('.editable').editable(options) after the table is built and that works fine, but that stops working when pagination is involved.
I am using this example as a reference https://github.com/wenzhixin/bootstrap-table-examples/blob/master/welcome.html
oh, and I should mention the proper scripts and css files are locally hosted and being included correctly in my html.
Library quick links:
https://vitalets.github.io/bootstrap-editable/
http://bootstrap-table.wenzhixin.net.cn/
Woops. As it turns out, there are compatibility issues with x-editable, bootstrap 3 and bootstrap-tables.
To fix this all I had to do was include the bootstrap-editable-tables extension
https://github.com/wenzhixin/bootstrap-table/tree/master/src/extensions/editable
I am working in a sencha touch ap and I need to generate views with dynamic forms.
Configuration comes from the backend (JSON) and depending of this I paint a component or other.. for example:
"auxiliaryGroups": [
{
"id": "1000",
"name": "Basic Data",
"fields": [
{
"id": "1001",
"name": "Company name",
"editable": true,
"mandatory": true,
"calculation": true,
"internalType": "T",
"type": "textfield",
"options": []
}
]
}
],
Where type is related xtype in Sencha.
In the view I am creating all options of fields:
{
xtype : 'fieldset',
itemId: 'auxiliaryFieldsGroup3',
title: 'Requirements',
//cls : 'headerField',
items:[
{
xtype: 'togglefield',
name: 'f6',
label: 'Auxiliary field R1'
},
{
xtype: 'selectfield',
name: 'f10',
label: 'Auxiliary field R5',
placeHolder: 'Select one..',
options: [
{text: 'First Option', value: 'first'},
{text: 'Second Option', value: 'second'},
{text: 'Third Option', value: 'third'}
]
},
{
xtype: 'textfield'
}
]
}
And I receive the configuration from the server, I understand the view like a store of different fields, and from the controller, it should add only fields specified in the json object.
How to create this dynamically following MVC concept?
Thank you
I assume that you have all the fields in the auxiliaryGroups.fields array.
After loading the form data from AJAX you can do it like this in your success call.
succses:function(response){
var response = Ext.decode(response.responseText);
var fields = response.auxiliaryGroups.fields;
var form = Ext.create("Ext.form.Panel",{
// here your form configuration.
cls:"xyz"
});
Ext.Array.forEach(fields,function(field){
var formField = {
xtype: field.type,
label: field.name,
name: field.id
};
form.add(formField);
});
Ext.Viewport.add(form);
form.show();
}
Based on my comment on your question, my idea about dynamic form generation is using ExtJS syntax to load form definition would be something like the code below; of course it would be extended and the data can be loaded from the server.
Ext.require([
'Ext.form.*'
]);
Ext.onReady(function() {
var data = [{
fieldLabel: 'First Name',
name: 'first',
allowBlank: false
}, {
fieldLabel: 'Last Name',
name: 'last'
}, {
fieldLabel: 'Company',
name: 'company'
}, {
fieldLabel: 'Email',
name: 'email',
vtype: 'email'
}, {
xtype: 'timefield',
fieldLabel: 'Time',
name: 'time',
minValue: '8:00am',
maxValue: '6:00pm'
}];
var form = Ext.create('Ext.form.Panel', {
frame: true,
title: 'Simple Form',
bodyStyle: 'padding:5px 5px 0',
width: 350,
fieldDefaults: {
msgTarget: 'side',
labelWidth: 75
},
defaultType: 'textfield',
defaults: {
anchor: '100%'
}
});
form.add(data);
form.render(document.body);
});
update:
When you create a view in run-time, communication between view and controller might be problematic because the controller doesn't know anything about the view. considering that the controller is responsible for initializing the view with appropriate data and handling view's events, data binding mechanism in ExtJS can solve the first part (initializing the view) which is described at View Models and Data Binding, the second part (handling view's events) can be solved with general methods in the controller, every element in the view should send its event to some specific methods and the methods based on the parameters should decide what to do.
This approach makes your methods in the controller a little fat and complicated that is the price of having dynamic form.
It is worth to mention that EXTJS raises different events in the life cycle of controllers and views and you should take benefit of them to manage your dynamic form.
I don't know about Touch, but in ExtJS, I usually do it by using the add function of a fieldset. You just loop through all your records, and create the fields on the fly.
var field = Ext.create('Ext.form.field.Text'); //or Ext.form.field.Date or a number field, whatever your back end returns.
Then set correct config options on field then
formFieldset.add(field);
I am almost new to sencha touch and I have this simple question:
I have a panel with a search field and a start search button (a simple search):
items: [{
xtype: 'container',
html: '<div style="width:100%;text-align:center;"><img src="images/logo.png" style="max-width:40%;" /></div>',
},{
xtype: 'fieldset',
title: '<center>Insert your adress</center>',
cls:'ps-red',
items: [{
xtype: 'textfield',
name: 'adress',
required: true,
clearIcon: true,
}]
},{
xtype:'button',
text:'Search',
ui:'confirm-round',
margin:5,
handler:function(){
}
}]
Clicking on the search button I need to make an ajax call with the input text params, and display results to another panel. What should I write in the handler function of the button?
Ext.define('Demo.view.SearchResults', {
extend: 'Ext.Container',
xtype: 'resultcard',
config: {
layout:'fit',
cls:'ks-basic',
items: [{
xtype: 'dataview',
scrollable: 'vertical',
cls: 'dataview-basic',
store: '????',
}]
}
});
OK let us assume the store as 'SampleStore'
this is the sample call that you should write in handler function, see if it is useful to you,in this example I added push view, you can update panel if you want
handler : function(){
var navigationView = button.up('navigationview');
Ext.getStore('SampleStore').getProxy().setExtraParam('search',address);
Ext.getStore('SampleStore').load({
callback: function(record, operation, success) {
if(success && record.length) {
// here you can call any other function to update panel
navigationView.push({
xtype : 'resultcard',
record : record
});
} else {
Ext.Msg.alert('Address not found. (' + address + ')');
}
}
});
}// handler close
I have created a form and am trying to send its contents to a server. I used the forms example from sensa.com as a template. The form sends a message to my server, but only with my the disable caching value and not any of the form values, for example [url]/register?_dc=1829384859324 . I also modified the example to use my server url and my server received the same type of request with only _dc=... from the example.
Is there some explicit way I have to list the fields I want sent to the server?
My form code is listed below. When I call submit, I use form.submit({method: 'get'});
var formBase = {
scroll: 'vertical',
url : 'MYURL/register',
standardSubmit : false,
items: [{
xtype: 'fieldset',
title: 'Personal Info',
instructions: 'Please enter the information above.',
defaults: {required: true,labelAlign: 'left',labelWidth: '40%'},
items: [
{ xtype: 'textfield',name : 'first',label: 'First Name',useClearIcon: true,autoCapitalize : false
}, { xtype: 'textfield',name : 'last',label: 'Last Name',useClearIcon: true,autoCapitalize : false
}, { xtype: 'passwordfield',name : 'password',label: 'Password',useClearIcon: false
}, {xtype: 'textfield',name : 'phone',label: 'Phone Number',
}, {xtype: 'emailfield', name : 'email',label: 'Email',placeHolder: 'you#email.com',useClearIcon: true
}]
}],
listeners : {
submit : function(form, result){
console.log('success',Ext.toArray(arguments));
},
exception : function(form, result){
console.log('failure', Ext.toArray(arguments));
}
}
I've just started using Sencha Touch myself, but I'm posting my form a bit different. I've created a submit button, and given that button a handler. The code that gets executed is the following:
this.loginView.submit({
method: 'POST',
waitTitle: 'Connecting',
waitMsg: 'Sending data...',
success: function(form, result) {
Ext.Msg.alert('Login succeeded!', result.response.reason);
},
failure: function(form, result){
Ext.Msg.alert('Login Failed!', result.response.reason);
}
});
In which this.loginView refers to an Ext.form.FormPanel object (I'm separating controller-code and view-code, which I highly recommend!). Another method you could try is create your own AJAX request (using Ext.Ajax.request) and retrieve your form params using the getValues(); method from the FormPanel object.
I hope it helps!
You have to set the form property standardSubmit to true.
This post is quite old, but there might be others having similar issues with form submitting.
If you are new to Sencha and you have a form which is submitting nothing, you probably followed this tutorial Building your first app
It has a problem. Form items MUST HAVE NAME which is missing in the example.
Items should look something like the following:
items: [
{
xtype: 'textfield',
name: 'name',
label: 'Name'
},
{
xtype: 'emailfield',
name: 'email',
label: 'Email'
},
{
xtype: 'textareafield',
name: 'message',
label: 'Message'
}
]