Iscroll - Jquery - Get position on a list item - javascript

The error I'm having is the following:
To the right of my page, I have a list of interesting points (displayed on a map to the left of the page).
Because the list is so long, I am using iScroll 4 (great plugin).
However, what I would like to do is fire an event when the user has scrolled the list, so I can check which items are currently visible to the user. iScroll already has an event set up for that, so I have a function that fires when needed. However, I cannot seem to get the proper coordinates of my list items.
What happens is the following:
When the list loads, I get an .offset() value for the first element. offset.top = 35, because my list starts 35px lower than the top edge of the page. This is good.
When I scroll the list; say I pull it down for 500px; I would expect the new location to be 35px - 500px = -465px. However, it sill says 35. Scrolling though the list does not affect the elemen'ts coordinates even though it has moved.
How can I get the actual coordinates?

Playing with iScroll, I think I found the solution. the offset() function is javascript refering to the #scroller div, which doesn't change. However internally, iScroll uses its own x and y properties.
So you can refer to the iScroll offset like this
var myScroll = new iScroll(...)
alert(myScroll.y) // -- will return your offset (negative number)

add in iscroll.js
getScrollY: function () { var that = this; return that.y; },

Related

Get element position relative to screen. (Or alternative solution)

I am aware this had been asked before, but no answer actually did the trick as far as I tested them.
Basically what I need is to change some element styles as soon as it "hits" the top border of the screen while scrolling down. This element is a 'Back to Top' button that will be sitting in a section and start following the user when they scroll pass said section.
I am not asking about CSS properties, I am asking about some JS property or method that allow me to know this. IE:
$('#back').distanceFromTopOfTheScreen() // This value will decrease as I scroll down
I know there are other soultions, but the client has asked for this behavior.
Any idea?
You can :
distance = $('#eleId')[0].getBoundingClientRect().top;
For more about getBoundingClientRect() look at the MDN Documentation
Note: This value change when you're scrolling, it gives you the distance between the top border of the element and the top of the Page
Sometimes JQuery make's everything more confusing than Native Javascript, even forgothing the very basics functions:
window.onscroll = function() { fixPosition()};
function fixPosition() {
var Yplus = 4; //number of lines in every scroll
document.getElementById('element').style.top = document.body.scrollTop + Yplus ;
}
This will allows you to move an "element" static on the window following the scroll.

Get vertical scroll position of next/previous waypoint

I'm using the Waypoints plugin to create some fancy navigation on scroll. So that I can force the user to scroll to the next/previous Waypoint, I'm attempting to collect the vertical scroll position of the current, active and next Waypoint:
$('.waypoint').waypoint(function(direction) {
var
currentWpId = this.element.id,
currentWpPos = $('#'+currentWpId).scrollTop(),
nextWpPost = $('#'+currentWpId).next().scrollTop(),
prevWpPost = $('#'+currentWpId).prev().scrollTop();
console.log( currentWpPos );
console.log( nextWpPost );
console.log( prevWpPost );
});
Unfortunately jQuery's scrollTop() function returns 0 for all elements. After doing some reading I believe this is a result of the elements having height: 100%; which I cannot remove due to some other CSS requirements. (Although I'm not certain this is the root cause of the issue.) Is there a way around this?
After looking for some alternative solutions, I thought to myself the Waypoints
plugin must know the values I'm trying to acquire to trigger a waypoint event! When looking at the this element, that indeed seems to be the case:
So, as an alternative, is there a way to acquire any array/object of all the Waypoint objects so I can grab these triggerPoint values?
scrollTop returns the scroll value of a scrollable element. For example, $(window).scrollTop() returns how much a user has scrolled on the page. I believe you have this confused with the element's position in the document, which you can get by calling .offset(). Offset will return a an object with top and left coordinates. In the end, you're looking for $(elem).offset().top.

window scroll method flickers in IE

This may come as a huge surprise to some people but I am having an issue with the IE browser when I am using the $(window).scroll method.
My goal:
I would like to have the menu located on the left retain it's position until the scroll reaches > y value. It will then fix itself to the top of the page until the scroll returns to a < y value.
My error:
Everything seems just fine in Chrome and Firefox but when I go to Internet Explorer it would seem the browser is moving #scroller every time the scroll value changes, this is causing a moving/flickering event.
If someone could point me to a resource or give me a workaround for this I would be very grateful!
Here is a fiddle:
http://jsfiddle.net/CampbeII/nLK7j/
Here is a link to the site in dev:
http://squ4reone.com/domains/ottawakaraoke/Squ4reone/responsive/index.php
My script:
$(window).scroll(function () {
var navigation = $(window).scrollTop();
if (navigation > 400) {
$('#scroller').css('top',navigation - 220);
} else {
$('#scroller').css('top',183);
$('#scroller').css('position','relative');
}
});
You might want to take a look at the jQuery Waypoints plugin, it lets you do sticky elements like this and a lot more.
If you want to stick with your current method, like the other answers have indicated you should toggle fixed positioning instead of updating the .top attribute in every scroll event. However, I would also introduce a flag to track whether or not it is currently stuck, this way you are only updating the position and top attributes when it actually make the transition instead of every scroll event. Interacting with the DOM is computationally expensive, this will take a lot of load off of the layout engine and should make things even smoother.
http://jsfiddle.net/WYNcj/6/
$(function () {
var stuck = false,
stickAt = $('#scroller').offset().top;
$(window).scroll(function () {
var scrollTop = $(window).scrollTop();
if (!stuck && scrollTop > stickAt) {
$('#scroller').css('top', 0);
$('#scroller').css('position','fixed');
stuck = true;
} else if (stuck && scrollTop < stickAt) {
$('#scroller').css('top', stickAt);
$('#scroller').css('position','absolute');
stuck = false;
}
});
});
Update
Switching the #scroller from relative to fixed removes it from the normal flow of the page, this can have unintended consequences for the layout as it re-flows without the missing block. If you change #scroller to use an absolute position it will be removed from the normal flow and will no longer cause these side-effects. I've updated the above example and the linked jsfiddle to reflect the changes to the JS/CSS.
I also changed the way that stickAt is calculated as well, it uses .offset() to find the exact position of the top of #scoller instead of relying on the CSS top value.
Instead of setting the top distance at each scroll event, please consider only switching between a fixed position and an absolute or relative position.All browsers will appreciate and Especially IE.
So you still listen to scroll but you now keep a state flag out of the scroll handler and simply evaluate if it has to switch between display types.
That is so much more optimized and IE likes it.
I can get flickers in Chrome as well if I scroll very quickly. Instead of updating the top position on scroll, instead used the fixed position for your element once the page has scrolled below the threshold. Take a look at the updated fiddle: http://jsfiddle.net/nLK7j/2/

javascript bind an event handler to horizontal scroll

Is there a way in javascript to bind an event handler to a horizontal scroll as opposed to the generic scroll event which is fired when the user scrolls horizontally and vertically? I want to trigger an event only when the user scrolls horizontally.
I searched around for an answer to this question, but couldn't seem to find anything.
Thanks!
P.S. My apologies if I'm using some terminology incorrectly. I'm fairly new to javascript.
UPDATE
Thanks so much for all your answers! In summary, it looks like you are all saying that this isn't supported in javascript, but I that I can accomplish the functionality with something like this (using jQuery) (jsFiddle):
var oldScrollTop = $(window).scrollTop();
$(window).bind('scroll', function () {
if (oldScrollTop == $(window).scrollTop())
//scrolled horizontally
else {
//scrolled vertically
oldScrollTop = $(window).scrollTop();
}
});​
That's all I needed to know. Thanks again!
Answering from my phone, so unable to provide code at the moment.
What you'll need to do is subscribe to the scroll event. There isn't a specific one for vertical/horizontal.
Next, you'll need to get some measurements about the current display area. You'll need to measure the window.clientHeight and window.clientWidth.
Next, get window.top and window.left. This will tell you where position of the viewport is, ie if it's greater than 0 then scroll bars have been used.
It's pretty simple math from here to get what you need. If no one else has provided a code example in the next few hours I'll try to do so.
Edit:
A bit further information.
You must capture the scroll event. You also need to store the initial window.top and window.left properties somewhere. Whenever the scroll event happens, do a simple check to see if the current top/left values differ from the stores value.
At this point, if either are different you can trigger your own custom events to indicate vertical or horizontal scrolling. If you are using jQuery, this is very easy. If you are writing js without library assistance, it's easy too but a little more involved.
Do some searches for event dispatching in js.
You can then write any other code you want to subscribe to your custom events without needing to tie them together with method calls.
I wrote a jQuery plugin for you that lets you attach functions to the scrollh event.
See it in action at jsfiddle.net.
/* Enable "scrollh" event jQuery plugin */
(function ($) {
$.fn.enableHScroll = function() {
function handler(el) {
var lastPos = el
.on('scroll', function() {
var newPos = $(this).scrollLeft();
if (newPos !== lastPos) {
$(this).trigger('scrollh', newPos - lastPos);
lastPos = newPos;
}
})
.scrollLeft();
}
return this.each(function() {
var el = $(this);
if (!el.data('hScrollEnabled')) {
el.data('hScrollEnabled', true);
handler(el);
}
});
}
}(jQuery));
It's this easy to use:
$('#container')
.enableHScroll()
.on('scrollh', function(obj, offset) {
$('#info').val(offset);
});
Please note that scroll events come very fast. Even if you click in the scrollbar to jump to a new position, many scroll events are generated. You may want to adjust this code to wait a short time and accumulate all the changes in position during that time before firing the hscroll event.
You can use the same scroll event, but within your handler use the scrollLeft function to see if the scrollbar moved horizontally from the last time the event was fired. If the scrollbar did not move then just return from your handler. Otherwise update your variable to the new position and take action.
You can check if the the x value of the page changes and ignore your y value.
If the x value changes: There is your horizontal scroll.
With page-load, store the initial scrollbar positions for both in two variables (presumably both will be 0). Next, whenever a scroll event occurs, find the scrollleft and scrolltop properties. If the scrollleft property's value is different and scrolltop's value is same as compared to their earlier values, that's a horizontal scroll. Then set the values of the variables to the new scroll values.
No, there is no special event for scroll horizontal (it is for global scroll), but you can try to check the position of content by property .scrollLeft and if it's different from the previous value it means that the user scrolled content horizontally.

How to know when an element will be off screen?

I am writing a simple script that displays a dialog box when a user hovers over a profile picture. It dynamically determines the profile pics location on the page and then places itself to the left of it and about 100px above it. This part is working fine.
My issue arises when a profile pic is at the top of the screen and a user mouses over it. The dialog will appear but the top portion of it will be above the fold (i.e. not in the current browser window). Naturally this is not good usability and I would like it to appear on the screen.
My question is how do I know when a dialog will be off screen so I can recalculate its position on the page?
I saw this question which seems like the same as mine but unfortunately no actual solution was provided other then to link to a jQuery plugin. I am using Prototype.
Prototype already provides positions with Element.viewportOffset().
Edit, as Mathew points out document.viewport gives the rest of the information. For example,
var dialogtop = dialog.viewportOffset().top;
if (dialogtop < 0) {
// above top of screen
}
elseif (dialogtop + dialog.getHeight > document.viewport.getHeight()) {
// below bottom of screen
}
You'll want to find the profile pic's position relative to the document (here's a good article on how, though I suspect Prototype's Element.Offset already handles this), then compare it to the body's scrollTop property to see if it's close enough to the top that it needs to have its dialog repositioned.
I am familiar with this problem, however, last time I was able to use a library (Seadragon) to get the screen dimensions and mouse position. I was also working with a fixed size overlay so no code to share with you other than general approach.
For my pop up box I decided to use the event mouse position rather than location of the div on the page. I then compared the mouse position to the known screen size, which I determined on start or resize.
From How do I get the size of the browser window using Prototype.js?
var viewport = document.viewport.getDimensions(); // Gets the viewport as an object literal
var width = viewport.width; // Usable window width
var height = viewport.height; // Usable window height
In Prototype you can also get the mouse coordinates:
function getcords(e){
mouseX = Event.pointerX(e);
mouseY = Event.pointerY(e);
//for testing put the mouse cords in a div for testing purposes
$('debug').innerHTML = 'mouseX:' + mouseX + '-- mouseY:' + mouseY;
}
Source : http://remorse.nl/2008/06/mouse_coordinates_with_prototype/

Categories

Resources