Drawing lines between elements - javascript

How can I draw a line between every h2 element on my HTML page so that I can receive the effect in the picture below? Initially, I would presume you would go about this by working out the size of the line required in-between the divs (divs are separated by the 1px horizontal line) + the distance between each of the h2s, but i'm not entirely sure how one could work out this distance.

You can try something like:
a) find the position w.r.t document (i.e. by calling $(element).offset()) of the 2 elements you want to connect, call the positions p1 and p2
b) Append an absolutely positioned canvas to the body with a z-index to ensure it is displayed on top of everything else.
c) Draw a line between p1 and p2 on the canvas
This is assuming the elements can be anywhere on screen. If the line you need to draw is assured to be always horizontal or vertical, it can probably be done in a simpler manner.

Just use offset() method. You can easily find the distance between elements using it.

Related

How to get elements positioned nearby in DOM

I am trying to build a confetti where elements would be dropping (animated to translateY) in a random fashion. I have a button around which i would like to avoid elements falling on top of in such a way that if any of the dropping confetti is near this block, it should be deviated from its path. Javascript does provide this function called document.elementFromPoint(x,y) but this gives me only an exact position. I rather am looking for elements within this complete range.
I have tried looking for elements at certain point using document.elementFromPoint(x,y) but that just gives me element at that exact position. I wish to avoid putting a handle on all the falling(animated) elements.
var elementMouseIsOver = document.elementFromPoint(x, y - 30);
if (elementMouseIsOver.className.indexOf('confetti') >= 0){
//change confetti left position here.
}
I expect this should not check for exact one position but the entire range nearby.

Javascript & Canvas: Draw and delete lines to create a "breathing" circle

I would like to create an element, that shows a red circle. Once the user clicks on it, she can record her voice. In order to show the LIVE mode, I'd like to make the circle "breath" according to the incoming frequencies.
I'm experimenting with a <canvas> element. That means it creates a circle that gets bigger and smaller, depending on the variable arcrad. However, the lines are being drawn correctly, but they do not disappear afterwards. I tried to apply .clip() but can't get it to work...
if (arcrad <= 10) arcrad = 10;
analyserContext.beginPath();
analyserContext.arc(100,120,arcrad,0,2*Math.PI);
analyserContext.closePath();
analyserContext.lineWidth = 2;
analyserContext.strokeStyle = 'red';
analyserContext.stroke();
Any ideas - or completely different strategies for this use case?
Canvas will overdraw by default. For your animation you’ll need to clean the canvas at the start of each frame. Use something the following at the start of your drawing function:
analyserContext.clearRect(0,0,200,200);
assuming your canvas is 200 pixels wide and high. It’s worth pointing out that sometimes you don’t want to completely clear the animation field every frame. For example, if you were to draw a semi transparent rectangle over the frame at the beginning (instead of clearing it) then you’d end up with a basic ‘bullet time’ style effect.
It's a normal behavior. Once something it's drawn on the canvas, it's there forever. You have to think like if you were painting something: what has been done cannot be undone.
Luckily, you still have solutions:
1) redraw another circle on top of the first one with the background color. It's really not the recommend way, but it still can be useful
2) use clearRect method (see How to clear the canvas for redrawing)
There are numerous ways to clear a canvas pre drawing to create animation:
How to clear the canvas for redrawing
simplest in my mind:
canvas.width=canvas.width;
though can equally use clearRect (which is actually quicker and won't reset the entire canvas if that is an issue regarding transforms etc!) over the region or whole canvas.
Get the likes of:
http://jsfiddle.net/dw17jxee/

jCanvas - start y from bottom left

I have created different layers, for example, a roof, a grid and various panels that are set.
I would like to start the y coordinate of the bottom left. Is there an already existing function for this, or is there an elegant solution to this problem?
You would wrap all your calls to jcanvas with a decorator that will "convert" the y-axis values.
Note that you cannot use rotation by 180° since the rotate is applied after positionning.

How to create CSS/JavaScript circles grid

I need to do something like this:
This may look quite easy, but there are some requirements:
- the width of the containing div should depend on the text length (is it possible at all in CSS?)
- all circles should be positioned randomly - this is the most diffucult part for me.
As I'm using border-radius for creating circles (setting height, width and border-radius of 50%) I try to create some kind of grid in JavaScript where I iterate through each element and get its dimensions. Then I get the position of previous element (if any) and add them to the current element dimensions. Additionally, adding some margins will help avoid collisions. Is it correct approach?
I'm just looking for a suggestion how to solve my two issues.
Circles that scale based on size of content.
This is something you will need to solve first, because you wont be able to place them anywhere without first knowing their dimensions.
Naturally the size of a DIV expands first by width, then by height. That is, the maximum width of a container must first be utilized before moving on to the height constraint. Because of this, making a circle scale with equal radius may prove to be quite difficult without using a relative averaging.
Relative averaging is finding the average dimensions of your height / width based of the exhisting area of the contianer bounding your content. For example:
The width and height of the DIV bounding your content can be detected with javascript. Let's say youve discovered those properties too be 200px x 20px respectively.
Your total area is width * height so 4000px; But we are trying to acheive a square so we can apply rounded corners and form a rounded circle. We want to find dimensions of a rectangle that will be equal to the same area and then apply those new dimensions.
To acheive the same area with an equal width * height you can do something like:
√ 4000 = 63.2455532
Thus: 63.2455532 x 63.2455532 = 4000
Random placement of DIVs, and avoid collisons between DIVs.
After finding dimensions, you will be able to use a rand on your (X,Y) coordinates for the placement. Push these coordinates and radius onto an array. Use recursion too place the remaining circles on collsion failures. A collision failure would come from an element that has overlapping (X,Y)+radius relative too elements in the array that were pushed successfully.

An HTML5 Canvas Problem

I'm working on a script to do several things. In a nutshell, here's what it needs to do:
Read the coordinates from a page and be able to pop up a box within a specific region.
The pop up box needs to be able to follow the mouse around.
I need to be able to modify the box to look however I want (I was thinking a div container that is set to display:hidden, and then the JS sets the display to block when your mouse is in the specified region).
I need to be able to modify it easily (aka, add and subtract objects and coordinate sets)
I was originally using HTML maps (), and that worked great, until I resized my browser, and the div that I had following the mouse no longer lined up correctly. Something about the offset not working correctly, and I couldn't get it to work correctly, so I switched to an HTML canvas.
And now I've got the coordinates in the canvas correctly, I just can't figure out how to get something to pop up when the mouse is inside of a certain section. Here's my current code:
function drawLines(numbers, color){
//poly [x,y, x,y, x,y.....];
var poly=numbers;
context.fillStyle = color;
context.beginPath();
context.moveTo(poly[0], poly[1]);
for( item=2 ; item < poly.length-1 ; item+=2 )
{context.lineTo( poly[item] , poly[item+1] )};
context.closePath();
context.fill();
}
I've got each region inside of an array, which I then pass to the function one by one. The color was a test, and I can easily get each region to show up as a specified color, but that doesn't solve my problem. Any ideas? Thanks!
Seems strange to jump to canvas over a style issue, but ignoring that...
You could bind mousemove events on the canvas element and then do hit tests on your region to see if the mouse is inside the region.
Doing the hit test efficiently might be tricky depending on the number of regions your testing, but it's definitely doable.
The canvas is just like any other block level element, so the same events apply and are bound in the same way.
Here's one example of mouse events interacting with canvas. In this example, the events are bound to the document, but similar ideas apply.
http://dev.opera.com/articles/view/blob-sallad-canvas-tag-and-javascrip/

Categories

Resources