I have a div with a set height of 200, and sometimes there's enough content inside to have to scroll. Is there any way to be able to scale/grow the div until there's no overflow in Scriptaculous?
Edit: I looked at the wiki, especially at Effect.Scale (which seems like the one I want) but I couldn't find a way to do what I'd like.
Use CSS?
/*In non-IE css:*/
.myclass {
min-height: 270px;
}
/*In css for IE:*/
.myclass {
height: expression(this.scrollHeight < 270? "270px" : "auto" );
}
Related
Is there a way to decouple css's max-height and max-width from the limits used by JQuery-UI's resizable()?
I have a div that, when initially created, should be limited in size:
.my-div {
max-width: 40em;
max-height: 50%;
}
I want it to be resizable beyond its initial size, but unfortunately resizable() seems to use these attributes to also determine the maximum size for resizing. Trying to override that by passing maxHeight and maxWidth options doesn't work. Is there a way to solve this, or some other-work around that will allow me to limit the initial size of the div and later on allow it to increase via resizable()?
I've found an identical question on jquery.com, but it's unanswered there.
A small reproducing jsfiddle - how can I allow resizing the div to see the ".com" suffix, while keeping only the "stackoverflow" word visible at first?
Did you try resetting CSS values via jQuery (not tested) ?
$(".my-div").css({
"max-width": "60em",
"max-height": "75%"
});
Update :
From you fiddle, I tried this :
.my-div {
width: 90px;
max-width: 130px;
overflow: hidden;
background-color: yellow;
}
Could it solve your problem ?
I ended up just implementing the "maximum" logic on the div manually to limit its size, instead of relying on max-width:
if ($div.width() > limit) $div.css('width', limit);
http://jsfiddle.net/yzn5pnhn/2/
This is an issue on Firefox and IE so far that I've tested; the problem does not exist on Chrome.
I'm including two TinyMCE editors on a page with one partially off-screen to start. When I select the color picker dropdown option from the toolbar on the first TinyMCE instance, the dropdown appears where it should. But if I scroll down and select the color picker dropdown in the second instance, that dropdown appears way below the editor and typically off the page.
You can see this in action here: http://jsfiddle.net/nm6wtca3/
Without removing the html, body CSS, what can I do to have the color picker always appear in the correct position?
I've traced the problem down to setting CSS on the html, body elements.
html, body {
width: 100%;
height: 100%;
overflow-x: hidden;
}
The dropdown div has CSS applied to it that is auto-calculated by TinyMCE. It looks something like this:
z-index: 65535;
left: 641.467px;
top: 633px;
width: 162px;
height: 105px;
How it appears in FF (sometimes way worse):
How it appears in Chrome (how it should look):
You did say you don't want to remove any CSS from the html,body, but you didn't say anything about adding to it! This solution is based on the assumption that you can add to the html,body
Solution
html, body {
width: 100%;
height: 100%;
overflow-x: hidden;
position: relative; /* Line added */
}
JSFiddle Example
I hope this helps. In all reality, you really only need to apply position: relative; to the body like so body { position: relative; }
I'm not super familiar with tinymce's colorpicker, but I can see the issue, and I can replicate it reliably: your problem occurs when you have a picker open, and then you scroll. I can replicate this in chrome too. Here's a video.
When I look at the DOM, I see that tinyMCE has created two absolute-positioned divs at the end of document.body, one for each picker. When you open one, their position is updated to reflect the location of the toolbar-button at the time you clicked it, but it never gets updated when you scroll!
So, how to solve this? Well, there are a few possibilities:
Option 1: it looks like tinyMCE provides a method to bind a control to an event (here). With this, you could bind a callback to 'scroll' that repositions the box...
Huh, now that I think of it, you could simply close any open colorpickers whenever a user scrolls ... kinda feels like a cop-out but there's no denying it has the best R.O.I. ;) We'll call that Option 2!
Option 3: depending on the implementation of the colorpicker, you may be able to override where in the DOM those divs get rendered. The API method I saw that looked the most promising is here. Once you have the div inside a relative-positioned parent, you'd also have to make the colorpicker's positioning algorithm smart enough to look in the right place for x and y offset ...when I tried this by just moving the element and mashing in some css by hand in chrome-console, the algorithm still computed x and y offsets based on doc.body, so depending on where you were scrolled at click-time, everything would be out of position
It looks like this issue might be troubling other people as well... maybe they've found a solution but haven't posted anything about it?
I hope this is enough info to get you past the problem... Let me know if you have any questions!
It looks like the problem is caused by overflow-x: hidden;
It may not be the answer you want but removing that or moving it to a page wrapper will solve your problem.
Working Example
html, body {
width: 100%;
height: 100%;
padding:0;
margin:0;
}
#pagewrapper{
overflow-x: hidden;
}
Another option would be to force repositioning on scroll, but honestly this is overkill... I strongly recommend fixing the css instead.
Another working example
$('body').scroll(posfix); // when the body scrolls
$('#mceu_10').click(posfix); // when you click the top font color button
$('#mceu_35').click(posfix); // when you click the bottom font color button
function posfix() {
setTimeout(function () { // hack way to ensure it fires after the menu is shown
$('#mceu_51').css({
top: $('#mceu_10').offset().top + $('#mceu_10').height(), // set top/left based on button's position
left: $('#mceu_10').offset().left + $('#mceu_10').width() / 2
});
$('#mceu_52').css({
top: $('#mceu_35').offset().top + $('#mceu_35').height(),
left: $('#mceu_35').offset().left + $('#mceu_35').width() / 2
});
}, 1);
}
it works on firefox, and Internet Explorer fine
just remove this css code
html, body {
width: 100%;
height: 100%;
overflow-x: hidden;
}
Please take a look at this:
html,
body {
width: auto;
height: auto;
overflow-x: hidden;
}
You can simply set body width and height to auto, then there won't be any need to use position and you don't have to remove anything. I think you do not need to use height: 100% since it will be auto-calculated by TinyMCE. i hope it helped.
Update
Look at the screen shot from chrome and its same in firefox. And i didn't remove any css but just changed..and by putting 100% in css the output will be like :-
Please check this one with auto but not 100%..thank you
any idea why in the example below, media queries stops changing the height of the menu bar after it's been changed by js? (make window small and click on the arrow to expand the mini menu). Do I need to register a point of origin for the menu element or something?
CSS:
#menu {
position: fixed;
left: 0px;
bottom: 0px;
width: 100%;
height: 90px;
z-index: 11000;
opacity: 1;
background-color: #F03600;
}
JS:
if ($("#arrowup").css('top') == '0px') {
$("#menu").animate({'height':'270px'}, 800, "easeInOutQuint");
} else {
$("#menu").animate({'height':'55px'}, 800, "easeInOutQuint");
}
You can check out the page here, all the code's on a single page:
http://www.nioute.co.uk/stuff/
Also, what's a good read with regards to media queries / js interaction?
Thanks!
The reason the media queries don't work is because when you modify the bar with Javascript, it applies inline-css. This overrides CSS that you may have in your stylesheets. The problem seems to be, when you toggle the arrow back down, #menu has an inline style of height="55px" applied to it, which blocks the regular style of 90px on a larger size.
The solution would be to clear the style when the window is resized to larger than your media query breakpoint using something like $(window).resize(function()...); and checking the current width of the window against your breakpoint. If it returns true, call $('#menu').attr('style', ''); and that will remove the inline style.
You can use class for adding some styles to elements and removing they after the job instead of getElementById(#menu).style.height = ...
for example:
getElementById(#menu).classList.add("newHeight")
Or
getElementById(#menu).classList.remove("newHeight")
I want to hide scrollbar to appear on a long div,but still able to scroll through mouse or keyboard arrow keys.I read another thread here about scrollable.Tried to use that..but could not implement that...could someone guide me how to implement that clearly or is there any other option with jquery or css?
Any help would be greatly appreciated.
Thanks
I'm not 100% sure on the browser compatibility of this, but you can have two div's - an outer div and a inner div. The inner div will have all your content. Your css could then look like this:
#outer {
width: 200px;
height: 200px;
overflow:hidden;
}
#inner {
height: 200px;
width: 225px;
overflow: scroll;
}
That is, the inner block would be wide enough to contain a scrollbar, but have it hidden from sight by the containing div. This worked for me in webkit. You might have to fiddle with the widths to make sure text doesn't get cut off.
That said, I would carefully think about WHY you're trying to do this. This could be a huge usability issue for your users, as they will not have any indication that there is more content within the div.
To do this is add the following css
.div::-webkit-scrollbar {
display: none;
}
This is saying that hey remove the display of the scroll bar but keep the functionality
height: 100% in CSS obviously doesn't work. So is there any other CSS or JavaScript/jQuery solutions to this problem? Please advise.
'Let's say your problem element is a <div>. If you make sure your <div>s height has something to reference to, almost all your problems will disappear:
#my_div
{
height: 100%; /* Won't work. What is 100% of an unknown/unset value? */
}
Make sure the <div>'s parents have a set height too. I usually do this (well, not exactly, but you get the idea):
#my_div, #parent_of_the_div, body, html
{
height: 100%; /* This works, but it will show scrollbars if the body
or html elements have padding or margins. */
}
So you want a div to be the height of the screen? It's kind of non-obvious, but css height is the correct approach. The trick is you need to have the html and body elements also take up the full height of the page, otherwise the div is taking up 100% of nothing. The best way I've found to do this is:
html {
height: 100%;
}
body {
height: 100%;
}
#contentDiv {
min-height: 100%;
}
No Javascript required,becouse CSS3 has some new values for sizing things relative to the current viewport size: vw, vh, and vmin
1vw = 1% of viewport width
1vh = 1% of viewport height
1vmin = 1vw or 1vh, whichever is smaller
1vmax = 1vw or 1vh, whichever is larger
so you can write it on your style :
#contentDiv {
height: 100vh;
}
With jQuery, you could use:
$('div.class').css('height', $(window).height()+'px');
Pure css
#container {
position:absolute;
top:0;
right:0;
bottom:0;
left:0;
}
Good Luck
Or javacript Jquery:
Ready (not innerHeight in ie8):
$(document).ready( function(){
var heightwindow = $(document).height();
$('#container').css('height', heightwindow+'px');
});
resize window :
$(window).resize(function() {
var heightwindow = $(document).height();
$('#container').css('height', heightwindow+'px');
});
There are a few options you may find useful:
vh (viewport height)
vw (viewport width)
vmin (viewport minimum length)
vmax (viewport maximum length)
#container{
height: 100vh;
background: black;
}
My answer builds on jonwayne's because there wasn't much explanation.
You cannot use css to get the value of a users monitor, but you can do it via javascript. So the trick is to add javascript to the page load event which will set the height based on the browser window height. Using jQuery, you can do this with the following snippet
// jquery shorthand for onLoad event
$(function() {
// Set the css height property of #div_to_resize to the css
// height property of the browser window
$('#div_to_resize').css('height',$(window).css('height'));
}
You can also optionally attach to the resize event of the browser to reset the height if the window is resized. Combined with the previous snippet it would be
// We extracted this to a function since we reference it more then once
function matchHeight() {
$('#div_to_resize').css('height',$(window).height);
}
// jQuery shorthand for document.onload
$(function() {
matchHeight();
//On the resize event, call matchHeight()
$(window).resize(matchHeight);
});
I don't think you can get the monitor's resolution with any web technology. What you an do is use Javascript to get the browser's height and set the height property of div in the css. This post might help for getting the height.